This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Herman2604
About
- Username
- Herman2604
- Joined
- Visits
- 230
- Last Active
- Roles
- Member
Comments
-
That's not making sense, if I talk direct to homey I get the female voice I installed why would that change? I don't have a male voice installed.
-
Hoi op het moment heb ik een simpele aansturing op basis van lucht vochtigheid, als het buiten minder heet wordt wil ik ook een itho box of iets dergelijks inbouwen, voor Itho staat bij Robbshop een guide om deze traploos in te stellen. Mijn eenvoud…
-
androidfroyo said: DaneeDeKruyff said: It works perfectly well for me without the counter and just the motion alarm cancelation timer. I can’t see how adding another component (the timer) would make it more reliable. Yeah me too…
-
androidfroyo said: I've read in another thread that the best way to use motion sensor is to do the following Flow #1 If motion detected -> turn on light and stop counter If motion not detected -> Start counter for say 5 min If counter =…
-
Rwin said: Herman2604 said: I don't know about qbino, but with fibaro you can set the forced brightness, or just brightness in the flow, so say lamp on THEN set brightness 50% This can be done with Qubino also but will result …
-
androidfroyo said: Hmm so actually now i dont really need better logic plugin? I used it for the boolean variable, but for the luminance its not needed.
-
I don't know about qbino, but with fibaro you can set the forced brightness, or just brightness in the flow, so say lamp on THEN set brightness 50%
-
B3rt said: heb je een screenshot hoe zo'n flow eruit ziet dat je een lamp aanstuurt die via die bridge gaat? Ik weet niet of je mij bedoelde, maar het is geen bridge, het is de Philips Hue Dimmer switch, deze is ingesteld via flows op H…
-
tlangelaar said: @androidfroyo, was talking about https://xiaomi-mi.com/sockets-and-sensors/aqara-temperature-and-humidity-sensor/, not the water sensor. See my flow, I trigger on air humidity not water detection. thx for the info!
-
Ik heb sinds kort 3 Hue lampen white ambiance in 1 luchter gestoken, ik stuur die via flows op homey direct aan, of via de App of via de Philips Hue dimmer (25 euro), werkt perfect en reageert ook direct, zeer tevreden.. Ik heb die drie lampen in 1 …
-
Oy1974 said: androidfroyo said: Sorry very basic question I was trying to follow the instructions on page 1 on how to make lights turn on and off via Better logic. But the first flow I made I ran into this problem It refuses to s…
-
What cheap did you use?, I was thinking about a weather station but if it can be done cheaper ??
-
cbh said: @k1s: The size (and direction) of the change will not be detected in the flow you have made. Therefore, the fan will be triggered with any change in humidity reported, also in case the humidity falls from e.g. 30% to 29% (It would not…
-
There is a lot of info in this section, but it's not easy to read through, isn't it possible to make a sticky index page?
-
For all the different flows you could use the : Every 1 hour in the first colom, and then a between X and Y time in the second colum, that would save some flows.
-
Oy1974 said: Maybe a better solution is, to disable the flows you wont need or use. Indeed, just disable all that you won't use, it's the easiest way. Have fun!
-
Is your homey time set right?
-
I'm not sure but on this screen right bottom is a plus, that way user could be added, but if I click it it goes searching for devices. I'll try if it works with anothet active phone Tomorrow, I'm gonna need this in the future as well, as soon as I …
-
lubbertkramer said: Here using Homey without Hue bridge and have the hue lights, hue strips and hue dimmer connected directly. as so far working good. Pro = bigger mesh and no delay for the motion detection because otherwise Homey is polling th…
-
did you try this app : Philips Hue ZigBee Sebastian Johansson v1.3.0 - 06.01.18 Maybe if you select the ambiant light bulb it works?
-
jacquesvzijp said: Hi, I would appreciate your experiences with the NEO Power Plugs. I have three, but they are terribly unreliable. First one is 1 meter from homey (works most of the time), second is 5 meters from homey (50% error rate) and t…
-
It cannot measure seismic activity, not in the sense of earthquakes or explosions underground. Thats a whole different kind of measurement. those sensors above are on-off Kind regards, Herman
-
I got it working, thx to all! I made 5 flows ( ill post 4 the 5th is the same On flow just with a different time and brightness setting. A timer flow to reset and keep the light on : The On flow: The off flow: And the manual override: The p…
-
Hi all, i have a question that i hope somebody can answer: I use the motion alarm to start my lights in the shower and that seem to work . But i wanted to shorten the delay (the 2-3 sec before it turns on after motion detected) and a made a associat…
-
Hi i made it like this, its only based on humidity , because thats the main reason the ventilation is running, to high is to high when there is someone or not: I build in a timer for when the set low humidity cannot be reached. I have a extra flow t…
-
JPe said: When you set the brightness, you don't have to set ON ( as you already concluded ) so, in your last picture, remove the ON card. Yes! thx i totaly looked over that possibility! , I think i'm getting where i want , every time a …
-
Rocodamelshe said: martijn1980 said: Herman2604 said: I was not sure where to post this but I saw a minor fault in the preview app, in have a - 35% relative brightness setting in a flow. In the new app it says :set relative b…
-
Herman2604 said: For the override switch i tried the below one, but it looks like that that command is the same as Turn- ON, because the lights go on and the timer starts running? but there is no OFF, even if i press again. If i press again th…
-
I was not sure where to post this but I saw a minor fault in the preview app, in have a - 35% relative brightness setting in a flow. In the new app it says :set relative brightness - 0,35, this should be - 35%,-0,35 is dimlvl, it's just a text erro…
-
Hi, i got this from the google website: Set up Voice Match Open the Google Home app Google Home app. Make sure the Google Home app is updated with the latest version. Make sure your phone or tablet is connected to the same Wi-Fi network as Googl…