This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Fire69
About
- Username
- Fire69
- Joined
- -
- Visits
- 3,304
- Last Active
- Roles
- Member
Comments
-
Do you have a model number for the Switch 2? Can't seem to find anything about it. Interested in seeing the difference with my relays. Wouldn't it be possible then to group all the devices that have a similar look and way of adding them? Like the …
-
ZperX said: @Fire69 It is a brick house, in the english countryside. No concrete, internally everything is plasterboard, the floor/ceiling is wooden beams with MDF on top, plasterboard at the bottom. No microwave. Wireless devices: 433Mhz Ligh…
-
MarcoF said: Fire69 said: MarcoF said: A Mesh only based on battery powered node is very unpredictable/unreliable! There is no mesh when only using battery powered nodes! So yes, that would be pretty unreliable... …
-
MarcoF said: A Mesh only based on battery powered node is very unpredictable/unreliable! There is no mesh when only using battery powered nodes! So yes, that would be pretty unreliable...
-
ZperX said: MarcoF said: @ZperX Are you familiar with Slack and did you do some research on how Z-Wave mesh networks work? Thank you for your kind comment. I don`t know why this comment. I can`t have mesh there or outdoor. …
-
caseda said: @Fire69 the z-wave driver doesn't care if you choose the wrong name, it will still choose the right driver for your device (the only thing that will be wrong is the learning image and instructions) You will get 50+ drivers just f…
-
MarcoF said: @BasVanDenBosch ; ------------------------------------------ please read on how "to build" a stable Z-Wave nmesh network and/or how Z-Wave networks work:http://blog.smartthings.com/iot101/a-guide-to-wireless-range-repeaters/ Pro…
-
I just moved all my z-wave stuff to Homey, ground and first floor. Everything working as expected. I don't have a big house, but the rollers upstairs are +10m away and 1 concrete floor inbetween.
-
I just did a full reset of my z-wave network and started all over, migrating everything I've got except 1 relay and 1 motion sensor. While adding I noticed an 'anomaly'? There appear to be doubles in the list when adding a new device. There is a Fi…
-
Well, I'm glad you have it too, thought I was going crazy here Raw settings are back now for all devices, maybe it needs some time after a reboot to magically appear So the only problem I have left now are the 2 ghost devices. I'll put it on …
-
I'll create an issue for the ghost devices. I forgot to check the crash log, but no worries, it just crashed again so here is the log: Stack trace: TypeError: Cannot read property 'CONFIGURATION_SET' of undefined at /node_modules/homey-zwavedriver…
-
I was going to test the new way of adding relays by removing/repairing some devices. Not a great success I must say... First double relay I tried I couldn't get removed. I tried clicking the X on the main node, it got stuck on the dialog screen. It…
-
That solved it I'll try the 'play anything' trigger tonight.
-
When I use 'nieuwe films' I don't get a response. Log shows this: Can't test the 'anything starts playing' right now, my daughter is watching a movie
-
Lol, it will be better after a good night's sleep
-
What other cards do you mean?? That's the only Speech card I have also...
-
caseda said: @HansieNL Since last update (few minutes ago) it will. @ everyone My pull request just got merged and published.! (v1.0.10) This means the new way for relays/switches (only 2 devices). You will need to re-pair them to have just …
-
Eternity said: @Fire69 I have a couple of FGS-222's too. I have added one of theses successfully by doing the 3x press on the actual wall switch (momentary type). That paired instantly with Homey. The distance was approx. 1,5 m. I tried to ad…
-
Has nothing to do with cost here.... It's just a software bug.
-
caseda said: @RogierVanWijk Did you reset the FGS-222 itself as well? or just homey And at what distance from your Homey are you trying to add it? I found that with Homey I need to be way closer than with my other controller.
-
EvertorN said: Uploaded 1.5.0 with an extra flow trigger: - When kodi plays anything This triggers a flow when any playback on Kodi is started.. (PS: Have fun @Fire69 ) Superduper! Thanks a lot!!
-
mitch said: Maybe you should make a video. Maybe it would be viewed as extra motivation for the Athom team to get this right and get it done right much sooner. I think this is way overdue since this was a main pitch point in their advertising (video…
-
They are already using multiple services (not disclosed which ones), your speech is always sent to multiple services and based on certain criteria (amongst others the speed the answer is returned) they select which one is used for that particular co…
-
ZperX said: How do you know it is the same engine? Superice confirmed it in the Android-app topic. I'm searching for it, but with the crappy search it's no easy task
-
ZperX said: Fire69 said: Maybe your relatives' English is too 'flat' Oh yes there is no issue with the app, that works perfectly like it should. I reckon that uses the google speech to text engine. Nope, same speech en…
-
Dutch and English work 'perfectly' here. Try using the app and check the /speech-input page. If recognition is OK there, the problem is with the microphones, otherwise it's your pronunciation. Maybe your relatives' English is too 'flat'
-
olive said: WathLamers said: Arthur27 said: It seems to work better now after the update what update? edit for me the recognicion is bad. homey does not understand me at 2,5 meters. only if i shout he listen. oke h…
-
My Homey has been extremely deaf for months. I had to talk to it at max 50cm or he wouldn't understand anything. It was located on a small table against the wall next to my couch, a bit cornered. A couple of days ago, as a test, I moved it to the o…
-
Don't think so.
-
Phuturist said: I already created an issue for this on GitHub this weekend. https://github.com/athombv/homey/issues/847 It's not a Fibaro specific issue but a zwave issue in general. Ah, ok. I only checked the Fibaro github, didn't come …