This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Fire69
About
- Username
- Fire69
- Joined
- -
- Visits
- 3,304
- Last Active
- Roles
- Member
Comments
-
Well, after a short night's sleep, it's not working anymore... Cards get updated when I use the switches, but I can't control any device anymore through Homey. Relay, dimmer, rollers, nothing... I'm posting it here since it's all Fibaro, but proba…
-
I moved over all my relais (except for 1 that is crucial, so I'll wait ) to Homey. I can't seem to control my lights with the device cards. I was wrong at first, I tried turning on the lights with the S1, but then I remembered you have to use t…
-
I get the differences, especially for the dimmer. But then it should surely be the icon of a bulb instead of the module itself Wouldn't it be logical that it's streamlined for every device, no matter what brand? You'll get a jungle of methods an…
-
OK, I took the risk and migrated some of my Fibaro devices to Homey They all seem to be working for now (except my motion sensor, same problem as the first one, no updates...) But... there is a lot of inconsistency in: * adding the devices * co…
-
So you mean fgr-221?
-
Robin said: That would be strange, I use SWITCH_MULTILEVELon Aeotec Dimmer and that works perfectly fine... caseda said: but until now it seems like all command classes have been implemented. I meant implemented in the drive…
-
No, don't see it on my Homey, probably because the class isn't implemented yet?
-
MartijnDeRhoter said: Whoa, definitely do NOT cold boot your Homey if you like your BL variables - all of mine just went (50+). That'll be fun recreating! Grr. You scared me with that post! Just did a cold boot too! But I checked, my va…
-
It wasn't in my debug info either. Only Sensor_MultiLevel, not Switch_MultiLevel. It absolutely supports it, I used it like that before with my main controller (paired as a dimmer) It also reports its percentage.
-
caseda said: @Fire69 i'm not on slack, so no i was not aware. But, really? i couldn't think of a way yet to make it work properly with both switches and outputs. What do you use to "listen" to both multichannelnodes of the multilevel_switch c…
-
@caseda: don't know if you are aware (see Slack), @RobinBolscher has a working implementation for the FGRM-222, I'm testing it with him. Hope you don't mind
-
Rocodamelshe said: Alexander said I got it working after a tip from a member on slack. After removing the power and leaving it off for some minutes I could add both kaku buttons again. Did someone whispered u the secret PTP solu…
-
I'm thinking it's a problem (software) with the microphone. When I'm very close (the 50cm) and I talk to it, you see the orange ring fluctuate with the volume of my voice. When I'm further away, it doesn't change so I'm thinking it just doesn't hear…
-
Recognition in Dutch is near perfect here... when I talk to it from a distance of max 50cm I can get it to react to 'OK Homey' from 5 meters away, but speech is never recognized then.
-
Sommo said: for what i understand till now, every time you switch from experimental/stable and viceversa u have to add-readd device, to make them work.. that is really annoying, installing-removing-reinstalling app, its a lot of work everytime.…
-
EvertorN said: Fire69 said: Awesome, thanks a lot! So why is there no flow trigger for just play? Because I haven't implemented it yet! lol! Any ETA for a next release?
-
@YvesGeffens, I found your idea pretty cool, so I tried creating the flows and it's working just fine here You can't use BetterLogic, you need to use the builtin variable function because you can't use BL with speech. Thanks for the nice idea
-
YvesGeffens said: Flow 2: If Homey microphone hears 'repeat please', then Say Something 'LastSpokenMessage'. As far as I know you can't use a BL variable to let Homey say the content of a variable. I wanted to use it too, but haven't…
-
I noticed yesterday my tv wasn't turned off automatically with my 'goodnight' flow. Just checked and the app had crashed. Don't know if this is helpful? Stack trace: Error: Uncaught, unspecified "error" event. (XMPP authentication failure) at Clien…
-
Sommo said: @Fire69 : are u sure is it so simple? Yep. That's how I do it also. I'm at experimental, but I always wait a couple of days after they are released so I can check the reactions of the other users. If you don't want to inst…
-
TheoDeKoning said: Sommo said: hope soon at least a 0.9.x version could be release as stable.. to turn back on my homey...and do some tests.. The same here. Starting all over again. DieterKoblenz said: If you are not…
-
EvertorN said: @Fire69 Yeah I can, but that could possibly interfere with other events like resume, episode start and movie start . But as long as you're aware of that as a flow user you should be fine.. I'll add that About the log and the f…
-
Problem is that the icon is the same and the name gets cut off so you can't see it right away. I had the same with the motion sensor You have to hover your mouse over the name to get a pop-up.
-
EvertorN said: @Fire69, yes you have to make a double flow.. "Resume" gets triggered when you resume a movie or episode (i.e. after you paused it). 'movie start' or 'episode start' get triggered when you play a movie or episode from the start. …
-
Also, don't know if I asked this already, but what are the flows in the log? Why is there a trigger for resume and stop, but not for when you play from the beginning?
-
@EvertorN, I have 2 flows now with 'Als Dan ' to make it work with resume, but then it doesn't work anymore when a movie starts from the beginning. Do I have to make double flows for this, or am I missing something here?
-
And related to that: http://homey.local/manager/i18n/locales/nl.json Wittiness
-
Hm, too bad. Don't really want to remove it from my current controller and add it to Homey. It's not working stable enough for me (and neither is my other controller so I don't want to touch it while the module is working OK )
-
caseda said: little update on the status of the app: Dimmer (2): there is missing something in the z-wave driver that stops me from adding the S2 button properly like it should for control with homey (for both the dimmer v1 and v2), so its a w…
-
Mine does (and always has) also. But not all the time. When I ask what my calender is for tomorrow, no problem. When it's installing a firmware update, hardly understandable. Seems like sometimes it's just too busy doing other stuff...