This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Eternity
About
- Username
- Eternity
- Joined
- Visits
- 4,331
- Last Active
- Roles
- Member
Comments
-
Perhaps not Fibaro but more z-wave related; my double relay switches (222's) no longer work.... I can use the wall switch no operate it, but the web interface doesn't do anything. Also, 222's in a flow don't work either. I have PTP, killed and re-s…
-
Checked you suggestion, but it did not do the trick. It has to be a z-wave issue; I can move sliders in the control pannel (no error of "lost device") but the actual powernode doesn't do anything. Did you do a software reboot, or PTP? I will do …
-
Cheers @Phuturist , I will try that!
-
Both Only change the first relay. This is the 'main' relay and the settings are automatic for both nodes. I had the same problem, @caseda helped me with this too That is clear now. Thanks!
-
removed
-
Sorry for bringing up this issue again, I believe it was mentioned before but I can't find it in the forum. I have a couple of FGS-222 relay switches added to Homey. The first once's were added as 3 nodes, and later once's as 2 nodes (after the App…
-
And... it's working again :-) [motion alarm and insights]
-
Motion was not detected initially - all other parameters were - but now it is... In Insights all parameters are shown, except motion. I will give it some days to see if this solves itself :-)
-
@Fire69 I have a couple of FGS-222's too. I have added one of theses successfully by doing the 3x press on the actual wall switch (momentary type). That paired instantly with Homey. The distance was approx. 1,5 m. I tried to add a second 222, by m…
-
@gruijter_dev No, I get the same error with the v1.0.10 version (that is the latest on Git, I believe).
-
@gruijter_dev ; Installed the 0.0.10 version from Git, but get the same error. It might be an authentication issue, I will look into that first.
-
Thanks! I will use the github version!
-
@gruijter_dev I use the latest firmware 0.9.3 and latest App from the App store (0.0.9).
-
Why do I receive this error: I am able to log into my sons Magister account using his credentials (or mine).
-
Oh, I thought that z-wave was already a re-write, as we had to re-include our devices.
-
@MennoVanGrinsven So, you too are having these issues.... It is odd that it seems to work for a while. And, as I concluded, it is not the powernodes problem (in Domoticz they happily work for months in a row). @Athom Please.... address this issue…
-
I do find this strange...and it must be App related and not z-wave/Homey related. Let me try to explain. Setup 1 I have a Greenware Powernode 1 and a Powernode 6 included in a Domoticz setup. The nodes are polled and I have increased the "no commun…
-
@Phuturist Yes, waited more than a day....
-
This is a 'flow' in Domoticz nd it still works "next to" Homey. If I pauze Kodi, and it is dark outside (sun has set), the lights in the Kitchen go in (as I am grabbing a beer / coffee).
-
-
Z-wave has 2-way communication.... But... With the Greenwave powernode-1 and powernode 6 with Homey, I get no error if I switch a devise and it is not responding... I can even "switch" a not-connected-to-mains Powernode 1 and 6 and the devise swi…
-
Tired of waiting, I manually added the Greenwave App to I Clyde PowerNode 1 support. After successful installation (thanks community!) I notice some strange results. I added 3 Greenwave PowerNode 1's to my system. It had only the Greenwave 6 inc…
-
Oh, right... I have them screwed in the wall and haven't memorized the amount of contacts... Will test hovering! Thanks guys!
-
Distinguish different relais... In the pairing process, you get presented with icons of various Fibaro devices. Which one is the 222? Two double relay switches are shown. Where can you see the icons, which are available in the installation direc…
-
Mine took a night to start behaving ;-)
-
Checked again....and motion detection is working *with* correct feedback (icon in App and online)!
-
Yes, I do. To be more precise. The motion icon does not show any change when motion is detected (the led on the sensors lights up, but in the App and browser the motion icon stays unchanged) *but* my motion triggered flows still work!
-
@caseda Yes, it is now working with S0 instead of S1... my bad......
-
That is great nes @brinkie Thanks!
-
With Domoticz and the 255 + polling I had no green lights. Now, with all Greenwave nodes in Homey, I have had green leds for days.