This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Eternity
About
- Username
- Eternity
- Joined
- Visits
- 4,331
- Last Active
- Roles
- Member
Comments
-
What I have learned is add permanent powered devices first while keeping your homey at its base location. That is not possible... To include a mains powered z-wave device, I have to have Homey within 1 meter distance... So, it can't stay in …
-
Well, that saves me the effort But, that rules out that option !
-
Same here, but I never re-paired it after the last App updates (as it will mess up my flows *and* I have to dig the PowerNode 6 up from behind my hifi/tv set to get it close to Homey). Perhaps a re-pair will give you the overall power rating....
-
-
Yes, I was about to comment on the battery, too Mine has the above battery installed. I found an adaptor and it states 3V but I measure 4,88 volt without a load.... Another one stated 3,6 and gives 3,6V so I guess I have a solution :-)
-
Update I came up with an even simpler idea; use an old / not used adaptor instead :-) Must have a box somewhere with a pile of those... hope to find one with a 3 to 4 volt output.
-
Yippie !!!! I will install the approved App via the App store and sit on my hands and not install via CLI. After that I will migrate my flows from the obsolete Harmony App to your version. Looking forward to the new App and I am keen to see what f…
-
Great! Thank you @Robebar
-
Yes, it is constantly reporting. I will try to improvise a way to push the button on the back off the sensor. This is wasting batteries... Hopefully it will stop reporting sabotage alarm. Thanks for the answer!
-
Perhaps a silly question; does 24/7 temper alarm drain the battery (thru constant reporting of the alarm status)?
-
Ignore..
-
Thanks!
-
Great news @jorden ! Thanks for your great Apps and work!
-
Well, mine has a broken 'clip' that should press the sensor on the back side, so it gives sabotage alarm 24/7. It took me a while to understand that this triggered the sabotage alarm ;-) I will try to overrule it, with a bit of solder or a wire (on…
-
My Fibaro switch can be be set to switch ON of Off. My NEO power plugs can be set to ON, Off or they can Toggle (so, basically switch from one state to another, indifferent of what the state was prior to the switching). I think what @bvdbos is try…
-
Oké, thanks for the info @caseda
-
Good Great progress!
-
In the Fibaro App topic, @TedTolboom wrote: "....there is still a bug (known to athom) that for some devices multichannel association is not working.." Any news on when multi channel association with the Sensor 6 can be expected?
-
Good question, @thxultra ! thxultra said: Can you also have more cameras grabbed in one flow. I have tried to do so, with two IP Cam's grabbing the images, but can't get it to work. The grabbed images are coming from diffe…
-
Agree with @Danone, the taste of succes is sweet... However, struggling to get there can be time consuming. So, you have a valid point. You should specify your location, perhaps a Homey user lives around the corner/block.
-
Thanks for the update, Jeroen. IMHO you made the right choice. Better build on a reliable base!
-
Nog even over de vloerverwarming... Ik heb een oud huis en deze grondig laten verbouwen. Zo is er ook vloerverwarming gekomen. Ik had (...) veel meer lussen bij de koude bronnen (deuren en ramen) moeten laten aanleggen! Standaard hangt de thermo…
-
In my browser I get this response (with the example shown above): {"status":200,"result":"OK"} Are you in the same Network? Perhaps you are sending this via G3/4 (external network) and Homey is on a different one... Both Homey and your pc/phone s…
-
TedTolboom said: Eternity said: Thanks @TedTolboom ! I was almost (...) doubting myself ;-) I was already doubting you too... for posting Aeotec questions in the Fibaro topic Perhaps I should spread the question over…
-
Thanks @TedTolboom ! I was almost (...) doubting myself ;-)
-
Trying to use the single group to set the association, I get a red line and can't update the setting. I can set the 29 (ID of the Fibaro, but without setting the S1 or S2). Is this a Aeotec issue (bug)?
-
Hm, that sounds interesting to avoid delays in my flows.... direct association. So setting up the motion sensor, with 255 (ON) at 'Motion detection ON command' and 0 (OFF) at 'Motion detection OFF command' should do the trick. If you foll…
-
@koeniebert If I open this url in my browser: 192.168.1.210/api/app/com.internet/kantoorventilator (the ip is of my Homey, set it to match yours!) It triggers this flow: And the ventilator in my Office switches on or off :-) Is this what you…
-
Thanks for the update. What does: * Add PM2.5 capability to sensor class mean? Found it :-) PM2.5 fijnstof deeltjes meten PM2.5 – Particulate matter 2.5 microns and below.
-
Dank je wel !