This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Eternity
About
- Username
- Eternity
- Joined
- Visits
- 4,331
- Last Active
- Roles
- Member
Comments
-
Will try that!
-
Reading the online manual for the motion sensor. This setting "Time period after which the motion alarm will be canceled in the main controller and associated devices. Any motion detected during this period resets the timer." means that I can set it…
-
Looking great! Missing? Well, I have zone called "Aanwezigheid" which shows me who is home atm. Would be nice to (remotely) view this via HomeyDa.sh
-
@Robebar Good idea!
-
The output of the convertor is a "euro stekker", so not hardwired directly. I guess that - for security reasons - it will not give an output, if it is not connected to mains. If I unplug it - on a sunny day - the leds on the convertor start to blink…
-
Found this in Dutch (last comment at the bottom of the page) and it seems not possible to measure negative power 'the normal way'.
-
No, right now it is plugged in straight to the mains. But, I have a spare NEO Plug and was curious if it would work. It would give me a simple way to monitor the actual power generated :-)
-
Looks awesome!
-
I think my Aeotec bathroom sensor is paired securely; the led light turns on as blue, whilst all my other Aeotec's light up green. I do find the delay in the bathroom longer than other responses; I guess I will repair it 'normally'.
-
Interesting! Do you mean that usb powered motion detectors - I have a bunch of Aeotec Sensor 6's - shou;d react faster than battery powered sensors?
-
3 Apps getting updated, great news! Thanks!
-
swttt said: The new version of homeydash is allmost released to some early alpha testers, and is a complete rewrite. Good news!!! Looking forward to this new version. Thanks for all the hard work @swttt !
-
@daand I think not many Homey users have updated the firmware.... it requires a z-wave stick....
-
Would be great to visualize sensor readings, like the presentation of temperature / humidity / lux values!
-
In my experience, the App seems a bit more reliable than my chrome browser (running on Android and MacOS).
-
After re including my sensors, I saw that the LED indicator lights up blue, while others light up green. I bet this is caused by adding the sensor as a secure devise...(Fibaro needs triple press of the button, I did this with the sensor too, Later …
-
To extend the issue, if I open the Flow page, it freezes and doesn't show my flows. After a page refresh and some minutes, the flow page shows it's contents.
-
Checked github and found several similar issues: https://github.com/athombv/homey/issues/1815 and this one https://github.com/athombv/homey/issues/1724 seems closest to my issue, but misses the offline issue with Apps installation. I will creat…
-
Solved it by removing and re-including it again... Odd that other sensor values were reported correctly, and the inclusion worked without an error. What if it was a flood sensor; one thinks it works and will alarm you, but it is not working correct…
-
Re-paired two of my Aeotec sensors, because I discovered that adding a brand new extra one, gave an extra functionality: sabotage alarm. So, I obviously a re-include was needed to get these suckers on par! Removed one, added it. Removed the second, …
-
Like it! The added functionality is great, also the possibility to 'dug deeper'; clicking on items opens extra screens and shows more information and options. Kewl! And, great speed! I have tried to add screenshots, but failed. Uploading photo's d…
-
That's interesting (and slightly out of my league)! I figured out how to use Get and Post html commands with Homey / Domoticz, but this seems a bit more complicated
-
I thought I would do a post to keep this subject/request alive ;-)
-
Home mode switching would be a great opportunity! Hope it can be implemented. @Aaron In July I asked this already
-
Thanks @caseda, it starts to make more sense. The potential free switching versus power measurement + scene selecting is the big difference. So, the sentence "Maar 1 relais softwarematig bedienbaar in Vera" does not apply to Homey...
-
In the App's info page I read: "FGS-223: Scene cards only triggers with the "Main Node" as device. The "Right Switch (S2)" as device doesn't work." I read the same on Robbshop website "Maar 1 relais softwarematig bedienbaar in Vera", but also "2 s…
-
@spoelly We tend to use the hardware Harmony remote to switch off the TV and other media stuff. That works fine. That Harmony activity is also seen by Homey and triggers additional actions: switch off other (z-wave) devices. In that flow - see ab…
-
Bug? I have a standard flow to switch off all my media/hifi/tv stuff. Recently I found that if I have switched off all stuff via my Harmony remote with the power button and after that activate this flow, my TV switched ON... Perhaps it is not an O…
-
Haha. Thanks!
-
Hmm, my first attempt to do some calculations and not very succesful at it... As a test I have created a Better logic number variable with the name 'waarde'. If I make a test flow and test it with this card, it does not update the variable. I tri…