This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Eternity
About
- Username
- Eternity
- Joined
- Visits
- 4,331
- Last Active
- Roles
- Member
Comments
-
I have it working again :-) The url I use is: http://IP:PORT/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=NAME&pwd=PASS UPDATE It's working for 3 of my 5 Foscam ip camera's (various types), so I guess I will have to use different URL's forma…
-
I have similar issues, and reported this via Github. A bunch of un known nodes, z-wave devices that are connected, but I have no way to delete them.
-
This url works for one of my Foscam ip camera's: http://IP:PORT/cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=XXXXX&pwd=ZZZZZ This doesn't: http://IP:PORT/cgi-bin/snapshot.cgi?loginuse=XXXXX&loginpas=ZZZZZ
-
I have exactly the same as @DrDoom. An attachment with x.jpg Various older and newer Foscam camera's
-
@mruiter I have a similar issue with nodes that won't delete. They are not in use, don't have a battery installed but remain present. I created a Github issue (a couple of weeks ago). Latest Homey f/w did not resolve this...bug.
-
Update: het lijkt me neter om deze zaak over te hevelen naar het officiele draadje van de App en in het Engels te zetten. Hebben er meer mensen er wellucht wat aan en is het beter vindbaar. @caseda Kon met de nieuwe Homey firmware opnieuw een p…
-
E-mail a photo works for me, however I do not get the 'token' to work. Will investigate further.
-
It used to work, but now I too have issues getting it to work again... I deleted the earlier working flows. Could some kind soul post a screen shot of working flows... Thanks!
-
Thanks @terryhendrix!
-
Well, I just updated. Entire process took 20 minutes. A quick glance shows no errors. I also was able to remove 2 z-wave devices that refused to delete in the previous f/w. The others I still can't delete. Perhaps after a PTP. So.... seems OK in my…
-
Thanks for the feedback. I have started the update. Will report back after it has finished the update process. As I understand, this might take several hours.
-
This is the first time I have delayed installing a new f/w. I am eager to test it, as I hope to be able to benefit from the z-wave improvements (and finally include my missing Spirit radiator valves, and delete non-deleted z-wave devices), but readi…
-
Yes, here we depend on reliable presence detection too. Pity it stopped working. The mentioned Tasker solution is not available for iPhone users. And the geofence solution via Owntracks wasn't successful either. Hope this gets some Athom love.
-
Oddly enough, on my Android 7 phone Smart Presence is still working correctly, but here two iPhones (a 6 and a 6s) are now continuously flipping between away/present . They were stable for months! I have been playing with the settings in Homey for …
-
Ordered 3!
-
Stealing the topic, a bit... sorry... Never thought of Zigbee motion sensors, I have those really expensive Aeotec z-wave sensors. One of those coast as much as 5 of those Smart Home Aqara Human Body Sensors! Thanks for the suggestion! How are th…
-
How does Homey find out that "someone woke up / iemand werd wakker"?
-
Which App versions and Homey firmware are you using, @2Be ?
-
Tested again, as I was hoping to have a miraculous recovery of the mail snapshot function..... but it still doesn't work for me... Tested with both the Telegram and Syno App. DS214+ with DSM v6.1.4 15217 update 2 (latest for my model) Homey v1.5.5…
-
Oh, I see. Yes, I misunderstood your issue. Very odd..... but as you write, the flows *does* work... so it must be a communication issue between Homey and the Somfy receiver. I don't own Somfy, so unfortunately can't help you any further....
-
@Ype Install the Better Logic App and go to the Homey | Settings menu, where you will than find the Better Logic app settings screen. Create a new varable: Once you have created the (boolean) variable, you can use it in flows, like @Rocodamelsh…
-
Could you post a screenshot of your flows. I have a feeling that the 'morning workday flow' has an issue.
-
As a work around I have installed Candy App and made this flow, which restarts the Thermosmart App daily at noon: Hopefully a solution will be available soon.
-
Same here..... Nor can it be emailed. Sending a message via Telegram works, the 'send snapshot' has stopped working a while ago. The developer is aware of this. Sending the snapshot via e-mail doesn't work either, unfortunately.
-
Thermosmart has stops working, showing: This seems to have started after an update of the App, before it was working flawlessly for ages. Restarting the App solves the error, but after a day or 2 it is broken again. I will report the bug via gi…
-
Thanks @Rocodamelshe, exactly as you wrote!
-
ignore
-
No worries Jeroen! Take care!
-
The second question: No. The App does not support that. However.... I managed to map a key (in my case the RECORD key on my Harmony remote) to open the Kodi menu, whilst Kodi is active. In short; I added a device in Logitech - a multi media PC -…
-
Perhaps the Fibaro RGBW controller is an option? But I might misunderstand your question....sorry!