This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Veldkornet
About
- Username
- Veldkornet
- Joined
- Visits
- 403
- Last Active
- Roles
- Member
Comments
-
Matsaki said: Newbie question, but how / where do I setup a "virtual device as a mode" in Homey? (I use desktop app) With the virtual devices app https://apps.athom.com/app/com.arjankranenburg.virtual
-
sauk1 said: I am having problems with the app and image grabbing. I wanted one flow and use grab an image when a door bell is pressed. The image is then immediately sent to Telegram. The problem is that if I use the tag in the Tag menu the ima…
-
Are there plans to release an app for Smanos devices? Or is anyone willing to make one? I have the Smanos X500 and it would be great if Homey can communicate with all of the devices. As far as I know, it uses 868MHz. In the pack I got: * X500 GS…
-
You should be able to. After the person is added, go back to the home settings, press on the relevant person and just check the permissions. I guess you’re looking for the “Allow editing” permission.
-
Initially I did try remove it, re-install, reboot. Nothing helped. I literally just tried again a few hours later and it was fine.
-
NoClaim said: HansieNL said: I did de-install old Toon device and app and updated Homey to version 1.5.9. Did install new Toon app 2.0.4 and added Toon again, but the Toon device is not added. Trying to add again gives the message "No …
-
I only ask because all my other apps seem to stay around their initial values, only the Hue app increases. And compared to the other apps, Hue does almost nothing on my Homey. It's also usually the app which uses the most memory (only behind Homey i…
-
Since the new update (v2.0.4), does the "Energiemeter" value get updated for anyone? Mine is blank. "Energie" and "Gasmeter" seem to work fine.
-
Does the app still have a memory leak? For me it starts off at around 21MB, but eventually it’s sitting at 50-60MB.
-
From the Apple Support site: https://support.apple.com/en-us/HT207057 Want to check the status of your home hub in the Home app on your iOS device? Open the Home app and tap in the upper-left corner. Then look under Home Hubs to see if your home h…
-
Hmm, I use an Apple TV 4K as my Hub, not sure what the limitations are when using an iPad as a hub... if any. Also, are you changing these settings from your iPad or your iPhone? Try using your iPhone rather if you weren't. Although apparently it…
-
I noticed that sometimes the geofence triggers worked, and other times they were just missed / skipped / I don't know exactly what, but it doesn't always work. So far, I found this personally to be more reliable.
-
quakerix said: Im curious what others have to say about this. is there a way to do geo fences like with OwnTracks? Do you mean, have multiple locations? Yes you can. In the "WHEN" you can choose the location. By default your "Home" is s…
-
Personally, I found this to be more reliable. The official Homey app worked great on one phone, but basically never on another and I always had to open the app, adjust the geofence, then it would work again for a while. OwnTracks I found was more r…
-
Bumper said: Hi Guys, have the app working on two iphones (8 and 6) but while my phone (8) is reporting fine on all geofences, my girlfriends phone reports fine on two work locations, but often ignores the 'thuis' zone (resulting in her not be…
-
MennoVanGrinsven said: Veldkornet said: Does / will this client also support Shared Secrets (or “secret encryption keys” as it’s called in the app)? See here: http://owntracks.org/booklet/features/encrypt/ No the app does not …
-
Does / will this client also support Shared Secrets (or “secret encryption keys” as it’s called in the app)? See here: http://owntracks.org/booklet/features/encrypt/
-
I guess best options right now, assuming Fibaro doesn’t play ball with anyone on releasing the firmwares, would be to fly in a HC Lite for the weekend to do some updates, add an HCL as a secondary controller, update and send it back Has anyone tr…
-
razorfish79 said: But the shown firmare version is "something". For example this is a Fibaro Plug. Such Fibaro Firmware does not even exist. This is with every module. Or is there a way to encrypt this number? The current Firmware of this shoul…
-
caseda said: @Veldkornet The firmware version is only populated (asked from the device) during inclusion, as this was only added recently, all devices included before homey version 1.5.4 (i believe) will not show the firmware version. Gr…
-
If you look at the settings for a ZWave device, when is the firmware version populated? I see on bug reports on GitHub for Fibaro, the firmware versions under the node information. For example here: https://github.com/athombv/com.fibaro/issues/208…
-
Well guys, go log some Fibaro issues https://github.com/athombv/com.fibaro/issues
-
So obvious... I don’t know how I missed it... The cards way way too small to show all the fields for some of the apps, I hope Athom will change that for (v2). *Edit: Even worse is that a week ago, I even logged an issue with the sounds, it must…
-
I see v0.8 is published with the sound options... but how do you use this? I don’t see the option anywhere? Additionally, any news on the rest of the PushOver parameters?
-
Hmm, Homeseer, I see... https://shop.homeseer.com/products/homeseer-z-flash-z-wave-ota-firmware-update-software I guess another problem is also getting the actual firmware files for the devices...
-
FredH said: After the update 1.5.8 all my fibaro devices are not working anymore, other z-wave devices are ok. PTP are not working then I rejoind the plugs and then I can no longer add the plugs to homey. I pull the battery out off the motion…
-
bvdbos said: If you have a misbehaving sensor, try to re-include it in Homey and see if that makes a difference (probably does). Not for me.
-
Phaeton said: And z-wave is unstable. Its weird. 1.5.3 was very stable with regards to z-wave. Now things are on and off unstable. Sometimes snappy, sometimes very slow. I have a lot of motion sensors which trigger events. Could it be that it t…
-
My Z-Wave network has gone to hell since installing 1.5.8. My house went back to the stone age, not even my doorbell works anymore. Door sensors are not working / late. Completely unreliable. Never have I had so many problems with Homey as I do now…
-
@slashroot Any problems after the update to Homey 1.5.8? My doorbell doesn't work anymore now