This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
B3rt
About
- Username
- B3rt
- Joined
- Visits
- 484
- Last Active
- Roles
- Member
Comments
-
it seems you have to remove all devices and repair them, after repairing it worked.
-
today version 4.0.10 is released, sadly the problem is still NOT fixed.. Now the doorbel rings but the flow is still looping..... So i trigger the flow which starts the door bel which results that the door bell keeps ringing until i unplug i…
-
Oy1974 said: B3rt said: i allready did this and the device still does not work. But the main problem is not only that the devices does not work but also that the flow where the devices is in triggered is keeping repeating itself, it s…
-
klikaanklikuit ACDB-7000C
-
i allready did this and the device still does not work. But the main problem is not only that the devices does not work but also that the flow where the devices is in triggered is keeping repeating itself, it seems to be in an infinity loop and onl…
-
latest official release: Homey Firmware Versie: 1.5.11
-
nope, because I am not sure if i install the beta version over de stable one that my current flows/devices are not fucked up etc.. and keep working after the update of the beta version, i do not want to have to set up everything new as from start. …
-
yes why? It seems the Beta update 4.0.9 has no fix for this, the fix should be according to the changelog already in 4.0.7, i quota e from the app store: v4.0.7 Fixed issues with sockets not responding in flows. Added a fallback for sending…
-
same issue here, using 4.0.7 stable, where can i find these topics regarding a solution? Problem is started 2 days ago since the update 4.0.7, i cannot find any topics the last 2 / 3 days which report a solution etc...
-
How stupid or blind can i be... did not see or notice this card at all.... haha
-
heb je een screenshot hoe zo'n flow eruit ziet dat je een lamp aanstuurt die via die bridge gaat?
-
Geen idee, de lampen schakelen eigenlijk nooit tegelijk, je ziet ze altijd 1 voor 1 aan, uit dimmen etc als je 1 flow start. Zwave en KAKU schakelen wel tegelijk Maar gebruik je een bridge of niet?
-
Heb nog een vraagje hierover. Heeft iemand een voorbeeld flow met de bridge? Kun je een screenshot plaatsen hoe dat eruit ziet? Heb inmiddels enkele hue lampen zonder bridge gekoppeld aan Homey en dat werkt, nu wil ik de resteren ikea lampe…
-
Need again some help with this stupid ikea lights.. I want to add a light, when i start the wizzard and asked to switch it off and on again. It is reqonized and want to start adding. After a few minutes it reporst NO zigbee device found.…
-
thx!
-
ok thx, maybe there is no gen 3 The question is then what is diff between gen 1 and 2 (round and square), is it only apple home kit?
-
I am having some problems whit updating the correct activity. When i change the activity using the harmony remote very often (7 out of 10 times) the activity is NOT known by the homey app. I have a flow which stores the current activity in a bet…
-
so there is actually no way to switch between the color and tempurature mode using flows? How do other users set default coloring to scene's using flows? So when i start a flow called lights on, all hue bulbs go to a specific dim level and specific…
-
ik schakel iets van 8 ikea lampen tegelijk, vaak doen het er 6 dan wel goed en 1 of 2 reageren niet en geven dan een rpc error in de flow, de error zelf varieert ook weer per keer. rpc 16, 17 etc etc Heb zelf correctie flows gemaakt maar gezien H…
-
ok thx for the feedback
-
Thx voor de feedback. Ik heb al problemen met die ikea lampen vanaf dag 1 ik deze lampen gekocht heb.. De moderators vinden het niet leuk als ik er nu weer over begin denk ik, dus doe ik dat ook niet. Heb wel al van alles geprobeerd om het op te l…
-
thx, ik gebruik nu ikea maar heb super veel problemen vandaar ik iets anders zoek. Heb zelf wel alternatieven gevonden zoals tp-link en innr maar of deze nu zoveel beter zijn.. Liefst had ik lampen via het zwave protocol maar die kan ik dus niet vi…
-
update: a reboot was not neccesarry to change time, the time is now correct....
-
dunno, currently at work, have to login remotely to change it on my next coffee break
-
Thx, gonna try this. But very strange that this setting is suddenly changed...
-
Update: Did not look that good, It seems that the time is indeed 1 hour off..... So real time is 10.00 according to Homey 9.00 I cannot find any setting to correct this. Anyone an idea how this is possible and how to correct this?
-
time and date (zone) are correct. Flow always worked but stopped suddenly, believe since last weekend (since last update!?!?, not sure) All flows which should be performed at a specific time stopped working, so current flows but also new ones I cr…
-
@TedTolboom i cannot test i am still waiting until the driver is first released before i gonna purchase the remotec device. I had allready several zwave products in the past which did not work with homey and the driver release took a long time and i…
-
we are now a few weeks further and have not found any update anywhere. Is there any news on this?
-
dat je wifi in je router moet instellen is logisch, de vraag was of je je zigbee signaal ook kon wijzigen... Ik heb voor de zekerheid mijn 2.4ghz signaal aangepast zodat deze vrij blijft voor zigbee. Wat IR betreft, dit heeft bij mij nog NOOIT gew…