This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
powermarcel10
About
- Username
- powermarcel10
- Joined
- Visits
- 985
- Last Active
- Roles
- Member
Comments
-
ErikVanDongen said: powermarcel10 said: powermarcel10 said: @ErikVanDongen Thanks a lot for this awesome app! I'm using it to shutdown or reboot my HTPC using a piece of software called 'Airytec Switch Off'. It creates a lin…
-
powermarcel10 said: @ErikVanDongen Thanks a lot for this awesome app! I'm using it to shutdown or reboot my HTPC using a piece of software called 'Airytec Switch Off'. It creates a link to shutdown or reboot my HTPC. Really awesome and useful…
-
Hello guys, I'm trying Heimdall for the first time and I think it's awesome! However, I'm not getting it working so far. It constantly says: "Sensor: Beweging gedetecteerd, geen alarm trigger omdat er een vertraagde trigger actief is. So in eng…
-
These bulbs are using bluetooth right? i thougt that Bluetooth was still not working with Homey?
-
gijsje said: I have no problems with it Is your phone also in English? My phone is in Dutch. When I configure it as you have done my phone goes to internet and look for searchresults but ifttt is doing nothing and nothing get trigge…
-
gijsje said: as i did say before google assistant in dutch can only answer questions and not do any home control. If you want home control you still need english and wait until some time in December Yes, but what I am trying to do is thi…
-
gijsje said: google home is not yet in dutch only google assistant I just ifttt to control my home works great But also only English right? Google assistant is availible in Dutch now, but when I try to add a card in ifttt for google Asis…
-
Hello guys, I have seen that Google assistent is launched for the Netherlands?? Is it allready possible to use it in Dutch with Homey?
-
New version should be released today right??
-
Thanks! A big limitation at this moment is that Marantz allows only one connection at the time.. So when I use an android app on my phone to control the receiver, homey lost it's connection.. I also configured the buttons of my smartphone to contro…
-
Hello, where can I find a list with available raw commands for my Marantz 1602?
-
The app is getting better and better! I only mis the option to control the Radiator valves.. Is this high on the priority list?
-
Phuturist said: powermarcel10 said: swttt said: Changing themes isn't high on the list (and requires some rewriting). Adding widgets should work, just the modals seem to hang so now and then. You could try removing the localst…
-
GeurtDijker said: powermarcel10 said: mruiter said: 1st the new homeys cant run on a firmware lower then 1.5.6 2th official statements can be get by sending email to support@athom.com 3th . you can always go for the manual upd…
-
swttt said: Changing themes isn't high on the list (and requires some rewriting). Adding widgets should work, just the modals seem to hang so now and then. You could try removing the localstorage from Settings->Info->Danger zone O…
-
Hmmm after my last comment, still connection issues..
-
You're making nice efforts! Awesome! But it seems to only work on my desktop using Microsoft edge.. Chrome is not working on my desktop and tablet.. At least, I cannot add widgets.. Is this a known thing? Also, I like to add my IP camera stream as …
-
mruiter said: 1st the new homeys cant run on a firmware lower then 1.5.6 2th official statements can be get by sending email to support@athom.com 3th . you can always go for the manual update and turn of auto update and go to 1.5.6 2 4th yes i…
-
canedje said: powermarcel10 said: Hello guys, I have some peds in house. (a rabbit and 2 cats) I only want the sensor to detect motion if I walk in the room. But now it also detects motion from the cats.. I allready lowered the sensit…
-
New update.. The new beta app is working for some days now, so that's good news! Fingers crossed, and add it to stable channel.. (if no other one has problems with this beta)
-
Hello guys, I have some peds in house. (a rabbit and 2 cats) I only want the sensor to detect motion if I walk in the room. But now it also detects motion from the cats.. I allready lowered the sensitivity in the settings to 1, but this doens't see…
-
powermarcel10 said: EvertorN said: To all beta users: Have you experienced any issues, I wanna release it to stable? @powermarcel10 , are you still experiencing connectivity issues? The beta version is working like a charm here. …
-
Hi, are you currently working on themes? And do you'd have any idea when we can expect a working widget part? I'm very excited!
-
Hello guys, I have one of these sensors at home and it's great for movement and humidity detection especially as it has the option to use it wired. But the lux sensor is really bad. If the room is totally bright, it still says that it is only 15 lu…
-
jprgomet said: I don't know how it works, but looks cool. https://www.facebook.com/futurism/videos/935987056580494/ Awesome! But how does it work... Any info?
-
EvertorN said: To all beta users: Have you experienced any issues, I wanna release it to stable? @powermarcel10 , are you still experiencing connectivity issues? The beta version is working like a charm here. I have a new pc, so I will t…
-
Is there still no way to perform an upgrade using Homey?? Or not with the usb cable?? Also.. Is there a way to see wich firmware version my sensor has? And if it is only possible to update the firmware using a z-wave stick.. What is the cheapest so…
-
The app is constantly loosing it's connection to Kodi, so I installed the old app again wich is working always.. Any ideas?
-
EvertorN said: powermarcel10 said: Hello, I removed the old version and installed the new beta version. But it says that it can not find any new devices and I have to close the window.. Due to my router, I'm never able to find my HTPC…
-
Hello, I removed the old version and installed the new beta version. But it says that it can not find any new devices and I have to close the window.. Due to my router, I'm never able to find my HTPC, but I can always add it mannually by enter the …