This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
JanH
About
- Username
- JanH
- Joined
- Visits
- 1,030
- Last Active
- Roles
- Member
Comments
-
Followed all the contributions the last few days about 1.5.6 rc8. Did not experience any problem with Zigbee (Ikea bulbs) and several Zwave plus devices since last experimental update. So, am I just a lucky user or does the difference in Homey-behav…
-
@swttt the prefix “https etc” also had to be typed. Lazy me didnot do that! Now it’s working. Thanks again.
-
@joeybrooks, @swtt and other as always kind advisors, thanks! I got it working with Dolphin! Also tried with Chrome to load, using the cloudID (copied from systempage), but I didnot succeed in logging in that way: ”site not reachable”. The third o…
-
@swttt just started to play around with your great Homeydash-app. Firstly I installed it at my IPad (new version with iOS 11) with Safari. Got it functioning without any problem. After that I did exactly the same at my wallmounted old IPad2 (iOS 9.3…
-
@B3rt bij je vraag in het Engelstalige item heb ik gereageerd op je probleem
-
@B3rt The bulbs you have choosen have typenr. 603.384.52 I presume. I experienced that this type only can be paired as generic Zigbee device, so not with the Ikea app. but by Homey-app itself. This means just on/off, not dimmable etc. Typenr. 103.18…
-
In een engelstalige bijdrage heb ik eerder geschetst wat bij mij gebeurde bij het installeren van 3 stuks GU10 leds in één armatuur. Hier een herhaling. Inderdaad herkent Homey een tweede en volgende lamp niet na pairing van de eerste. De oplossing …
-
@cautje Do you use Tradfri motionsensors as trigger? As far as I know those sensors are not (yet) supported.
-
A liitle nuance at @jjtbsomhorst experience. I’m using two Moves for about 6 months now. After 4 months the (plastic) chainwheels broke. I sent an email to Teptron about it. Within 24 hours I got a reply telling that they would send me new steel whe…
-
@GeurtDijker you’re dam*** right!. So needless advice, if one would not had that bad habbit like me
-
@Aaron could Ikea Tradfri GU10 be an alternative for you? I’m talking about type 003.182.92. specs: Zigbee, direct control by Homey and Homey-app, white change, dimmable, reasonable price, no separate intelligent switch or hub needed. I installed 3 …
-
@epjjansen that’s exactly what I tried to advice
-
Just a practical experience when installing Tradfri GU10 dimmable leds (type 003.182.92). I bought 3 to put together into one “standup” lamp body (armature). Discovered that after placing all three in one time, only the first one will be connected t…
-
@mtrams since last exp. update 1.3.2 same problem. Cannot log in anymore. Eneco inlogdetails definitely ok. But..... app is Beta, so no complaints, just waiting for update. @paheve which Homey FW is installed?
-
I'm aware of some critical reviews. Time for a more or less positive contribution. My two Moves are working quite well since 4 months. Only issue was that after two months I had to re-tighten the chains by moving the devices 6-8 mm lower then the or…
-
In de zijlijn van dit topic een korte reactie op de bijdrage van @spoelly. Ik gebruik tot volle tevredenheid een Fritzbox modem/router. Om de uithoeken van het huis een stabieler verbinding te geven heb ik een Fritzbox repeater (2.4 mhz) ingeschakel…
-
@bvdbos tnx for your reaction. Just put the issue at Github, including two screendumps
-
dejongj said: Besides selecting flows, there is also a big issue with scrolling, for example I can't get to the list of devices that are at the bottom when I finally do get to a flow screen. Do you know if that is included as well? Finally so…
-
@WRos thanks for your reply. I had a look at that link. Changed the backgroundcolor. That helped in visibility but the scrollbar still disappears after a short while (after one or two clicks).
-
JanH said: Not complaining but asking for a solution for my (only my?) following problem using the Homey desktop app. When creating or editing flows I need to scroll through the options in the (most left) systemcolumn with all commands, devices…
-
@Thomas donot you have this menu and this kind of content?
-
Strange! Voice recognition is an ongoing discussion. And that's valid in my opinion because it's one of the Homey selling points. But, there seems to be a lot of differences in the experiences of the Homey users. Just based on my own experience voic…
-
Some remarks at the items above. I'm using two Moves for vertical curtains. They work quite ok, but it's at BT. Homey should once in the future be able to connect to Move, I hope. By-the-way, how about Homey and BT in general? For ordinary curtains …
-
@shideban via trial-and-error een werkende oplossing gevonden voor het '1 minuut te vroeg' probleem. De screendump maakt hopelijk voldoende duidelijk wat ik heb gedaan om de uitgesproken tijd op precies het hele uur ook daadwerkelijk de juiste tijd …
-
@johan_kreeft in de screendump kun je zien waar je deze variabele kunt kiezen en naar de "dan"-kolom kunt slepen. Zet deze in het commando "spraak". Succes!
-
@swttt Sorry I used the wrong word. I had to write that its about the desktop app. I edited right away!
-
Installed Homey 1.20 exp. and Sonos app v2.2.1 exp. Everything seems to work well including playlists Spotify Premium. Just one remark: voice recognition in Dutch (f.e. Sonos aan/uit) worked ok till the actual updates. Its not reaction anymore. I am…
-
@Mac you're asking two things I understand. At first About Sonos play 1 and 5. I am using two paired Play 5's (version 1) for several years now. The sound is great in my opinion. But ..... I am assessing it in combination with a Sonos Sub. Without t…
-
@Jschuetz aha, now I understand the principle. But its far above my technical knowledge! Anyhow, I experienced the same when the device had been switched off. I just accept this for the moment. @rentinck great!
-
@Jschuetz to whom do you ask this question and what exactly do you mean with 'queue'?