This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
OGS
About
- Username
- OGS
- Joined
- Visits
- 892
- Last Active
- Roles
- Member
Comments
-
I have the problem that z-wave is switching on its own. For example 1 light should switch on at 7 and off at 21 and that seems to be working (the flow is working). But after 21 the light switches on again and there is no flow for it. When I look …
-
Since a couple of weeks I have the problem that with each time someone rings the bell I get about 4 emails from homey with picture. I know for sure I only have 1 flow. Is this a known problem?
-
Hi Phuturist, indeed that solved the problem. Removed and added it again. Thanks
-
Works great just installed it today and have to admit Homey reacts a lot better to siri as it does to its own microfone.
-
Since a couple of weeks the apps stopt sending emails with picture I found that the IP had changed so I changed it in the app settings and the flow works again but the email still doesn't I tried the test email in the settings and that works fine. T…
-
@swttt, I know I can switch in a certain zone, but can you share how you did this in 1 flow for your complete house?
-
Any news
-
Indeed this are just snippets but that whats coming in for that specific node, I can attach the complete Z-wave log but that is (I think) not relevant for this problem. But When I look at the first (made it Bolt and Italic) I can see both messages c…
-
And again with the front door [2017-07-11T06:50:30.532Z] Node[39]: Received application command for COMMAND_CLASS_MULTI_CHANNEL, data: 0x0d02022001ff [2017-07-11T06:50:30.566Z] Node[39]: Decapsulated frame from COMMAND_CLASS_MULTI_CHANNEL to COMMAND…
-
Hi Caseda, This morning I had the situation I have seen a couple of times The Z-Wave log form node 39 [2017-07-11T06:18:26.721Z] Node[39]: Received application command for COMMAND_CLASS_MULTI_CHANNEL, data: 0x0d02022001ff [2017-07-11T06:18:26.760Z]…
-
At least it should be closed 99.9% otherwise I have a big problem Indeed I used the activate/deactivate flow for me you can close this question as solved (super fast)
-
Indeed was very simple I just didn't see the repeating option. Thanks is working now
-
Thanks I will try the sugestions
-
Hi Caseda, I can live with that but it would be nice to see the battery status as an empty smoke sensor doesn't work anymore and it would be nice to know in advance when to go and buy some battery.
-
Try it with the Doorbird. Bit expensive but it works fine sends picture to email.
-
Hi Caseda, so the fibaro smoke sensors are useless with Homey? except as a temperature sensor. Or is there some setting in the sensor that could do the trick? how does it work with the Fibaro controller or other brands?
-
Again only temperature measurement and the rest is not there Homey 1.3.2 Fibaro app 1.5.3 I re-added them 2 weeks ago (after the 1.5.3 update) but after approx 1 week only temperature was showing Is this still a known problem or should I report at G…
-
Finally the E5 is gone since the install of 1.2. Hope it stays that way
-
I mounted the dimmer-1 in the ceiling with a L, N , pulse switch (T) at S1 and the lamp at the output, without using Sx and S2, I found the drawings somewhere on the internet and it works fine.
-
I also do agree with it if you put it that way.
-
I just noticed I mounted the last dimmer 1 today so I will have to order new ones for the bedrooms so that could also be dimmer 2. So at the moment there is no hurry. A global card to write a parameter to a device is still a nice to have.
-
I have some of them already in place so testing is possible. I never did an install from GitHub so that is something to explore. I also looked at dimmer 2 parameter 19, when set can you still change the dimming level with the switch?
-
Of coarse I only have dimmer 1. If you can add parameter 40 for dimmer 1 I would be very happy.
-
I want to set the dim level in a fibaro dimmer. For example: between time x and y the dimming level at push on should be lower then 10% this is fot the childrens bedroom so it won't wake them up when the light is turned on.
-
Is it possible to add this to the fibaro app?
-
Hi JaapPelt, I connected a wind meter to it that sends out 0 to 10 V depending on the wind speed. I tested it with a 5 V powersupply before placing it at its final place and that worked fine too. I think a 0 to 10 V potentiometer should work fine
-
I have the issue that sometimes Homey does not react to an input on the binairy sensor. Triggering it a second and sometimes third time it reacts and Homey gives me the correct respons (speak and push message). As I use one for my front door bell i…
-
In earlier times there was an option to directly set a parameter using the flow editor, is there still a way to do this?
-
@Caseda, where can I find this 1x, 2x press options for normal switches, i can only find this options when selecting a dimmer?
-
Hi Caseda, indeed the re-pairing did the trick, now it is working fine Thanks