This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Comments
I can't wait for it. I use Imperihome Pro with the Vera.
Now the most sensors are communicate with the Homey and some on the Vera with Imperihome.
If Homey is intergraded, then it makes Imperihome much more powerful.
"Little update : we have made a first study on Homey integration and it turns out that the REST API is not yet available (there are unofficial parts of it that can be found, but it can change and other parts are not available yet, such as authentication) => From Homey forums it seems that the team is working on releasing a new SDK and making the REST API public. Timeline is unclear for now but we'll have to wait until the API is ready. (don't hesitate to ping me if you have any info about this ."
Its now the only reason I keep my final vera in place just have an interface to the heating on my wall tablets
The API key is not implemented yet, there is no ETA homey version known.
It's pretty hard to implement, and still make is save for the end user.
and also not the highest of priorities.
That would make rudimentary integration with Homey possible.
@konradwalsh
Could you post an example?
You need to have the App HTTP Request Flow Cards and Better Logic
Create a flow with a request card
Then you can request by trigger the HTTP request -
In imperihome create a device that is HTTP Request
Put in you URL as the local url
Set the image or icon to something representative
like this:
Ideally you now need to have a better logic boolean to track its state and then return the state.
I am doing this a little differently now but you get the picture
This way it still has some kind of security to it and you don't need countless flows
Tried your suggestion. Entered the address of my Homey in Imperihome, with the same additions as you use. In my case it is http://192.168.1.210/api/app/com.internet/kantoorventilator
Made a flow, the flow test is succesful. However, Imperihome gives an error that sending the request failed.
If I enter the url in Chrome, it does work and responds with "{"status":200,"result":"OK"}"
Seems Imperihome fails somehow...
UPDATE:
I needed to restart the App after I changed the authorization settings.
Working now :-)
I created for each flow or device i want to control a http regquest card which i call from homey.
The disadvantage for now is that i only can trigger devices or flow/scenes not see any states etc.
But for now this is OK for me, i can now use my tablet and imperihome app as i did with my vera unit.
The api SDK will be released soon in the next update, so i think an official version for homey will be soon available after the SDK release.
But who want to try/use imperihome, it is possible to control homey using imperihome.
Just add in imperihome a http request and trigger a http flowcard in homey, this way you can trigger any flow or device in Homey!
docs of the api: https://apps.developer.athom.com/
I e-mailed them !
Hi there, you are referring to the new apps SDK...they need the new web API of Homey to be released. At last developer meeting they told they expect this release to be in 2.0 version of Homey. Expected in a couple of months. So we have to do wait a little bit longer. I assume ImperiHome can sign up as developer and get early access to the 2.0 build when it comes available in the developer release channel
I believe you can install the beta firmware and in that firmware this new API is already included, the official release will take a while.
see:
Homey v1.5 (including Apps SDK v2) is already ready for testing, and is scheduled to be released to 'Developer Preview' next week as well. = Week 24 & 25 (June 12 - June 23)
https://forum.athom.com/discussion/1430/software-status#latest
From: https://blog.athom.com/2017/07/07/homey-v2-0-future/
Emperihome will require the Athom-API to be able to connect to Homey with full control; will be part of v2.0
I think oauth isn't enabled yet, but other then that it should work.
It will get a rewrite when 2.0.0 gets there to support the api keys tho!
The docs are failing descriptions but at least the functions are defined. Where some functions don't work 100% yet tho.
It's a work in process, but it is working...for the most part.
I just read Imperihome is going to ask a monthly fee pretty soon for the premium version. That is for new customers only. I like the idea of this app and was hoping Homey will be supported in the near future.
Now I'm wandering if I should buy the pro version as a onetime payment before this isn't possible anymore.
Anyone has an idea if Homey support is still coming to Imperihome?
Not sure if I understand you correctly, but perhaps I can point you in the right direction.
In Imperihome I have created widgets that send a http request to Homey and switch on stuff. In this screenshot you see ventilators that can be switch on/off via Imperihome:
The actual widget is configured like this:
The URL is http://internalhomeyip/api/app/com.internet/slaapkamerventilator
(external ip can also be used)
In Homey, this flow is triggered:
So, in Imperihome touching the ventilator icon/widget will switch On or Off the ventilator.
BTW, on my phones homescreen I have created some shortcuts do call similar http request. So, I don't need to open Imperhome to switch a ventilator (or ARM/DISARM Heimdall)
I so wished this was a typo:
Hello,
Unfortunatly, Homey is not sharing its API. Ask them to share it with third parties.
Best Regards
The ImperiHome team
www.imperihome.com
Visit our Help Center
https://imperihome.zendesk.com/hc/en-us
Follow us on
https://twitter.com/ImperiHome
https://www.facebook.com/imperihome/
Onderduiker
Aug 14, 11:28 CEST
Goodmorning,
Is there any progress in supporting Homey?
I really mis imperihome after use with vera and zipato.
Kind regards,
Walter