›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Official

[SUBMITTED FOR APPROVAL] ATAG ONE Thermostat app (0.0.6)

MarcelTimmermansMarcelTimmermans Member
edited August 2017 in Apps
Hi,

I have a first version on github of this new beta app for the ATAG ONE Thermostat. I would like to have some beta testers that can test the app. 

You can find the app here: https://github.com/magtimmermans/com.cyclone-software.atagone/

The app has not yet all the triggers/conditions/actions I wanted but that will be added later.

protocol is based on http://atag.one (thanks to scanno who pointed me on this site)

Happy testing!


Tagged:

Comments

  • KritjuuKritjuu Member
    How do I install the app in Homey?
  • RocodamelsheRocodamelshe Member
    https://forum.athom.com/discussion/comment/33642/#Comment_33642
  • MarcelTimmermansMarcelTimmermans Member
    I have made an update on github.
  • KritjuuKritjuu Member
    Installatie gelukt en werkt. App zichtbaar in Homey. Geeft alleen de kamertemp. aan. Niet de buitentemperatuur en waterdruk.
  • MarcelTimmermansMarcelTimmermans Member
    Kritjuu said:
    Installatie gelukt en werkt. App zichtbaar in Homey. Geeft alleen de kamertemp. aan. Niet de buitentemperatuur en waterdruk.
    Dan kijk je zeker alleen naar de device card. Daar zie je alleen binnen temperatuur en ingestelde. Bij Insights heb je een aantal grafieken. En natuurlijk de triggers kun je gebruiken.
  • KritjuuKritjuu Member
    Ok. Werkt goed. Zou je ook de waterdruk kunnen toevoegen. Ik wil een flow maken die mij een waarschuwing geeft als de waterdruk te laag is.
  • MarcelTimmermansMarcelTimmermans Member
    edited October 2016
    @Kritjuu ;

    Bedankt voor het testen. 

    Dat kun je nu ook al doen. Voeg trigger card "Waterdruk verwarmings ketel" en dan kan je de waarde gebruiken om te testen of in de BL (Better Logic) applicatie op te slaan en vanuit daar er weer andere dingen mee doen. In de flow beneden moet je wat checks in bouwen zodat je niet bij bijvoorbeeld een druk van 1.8 naar 1.7 ook weer een melding krijgt. Is zoiets wat je bedoelt?


  • MarcelTimmermansMarcelTimmermans Member
    @Kritjuu ;

    Nog een vraagje. Ging het pairen ok? Of was dit lastig?
  • KritjuuKritjuu Member
    Pairen ging meteen goed. Op Atag One even bevestiging geven.

  • MarcelTimmermansMarcelTimmermans Member
    App is submitted for approval. 
  • MarcelTimmermansMarcelTimmermans Member
    update the app on Github for testing:

    https://github.com/magtimmermans/com.cyclone-software.atagone

    Please make sure you remove the device and re-add it (sorry for this but otherwise the capabilities won't work correctly).

  • MarcelTimmermansMarcelTimmermans Member
    edited November 2016
    updated version live in the app store (0.0.6)!
  • keverjeroenkeverjeroen Member
    It looks like ATAG now has an 2.0 version of the ATAG One. Any idea what the differences are? And does that one work with your Homey app too?

  • MarcelTimmermansMarcelTimmermans Member
    keverjeroen said:
    It looks like ATAG now has an 2.0 version of the ATAG One. Any idea what the differences are? And does that one work with your Homey app too?

    Hi, Didn't know this. I am also not sure if it works as I do not have such a new device. 
  • keverjeroenkeverjeroen Member
    Can't find any information about the diffrences between the 'old' thermostat and the new 2.0. Maybe it just is a 'verkooppraatje'. ;)
  • MarcelTimmermansMarcelTimmermans Member
    keverjeroen said:
    Can't find any information about the diffrences between the 'old' thermostat and the new 2.0. Maybe it just is a 'verkooppraatje'. ;)
    What I heard is that the 2.0 works on any atag heating device.


  • keverjeroenkeverjeroen Member
    Hi @MarcelTimmermans, is it possible to make the tags from this app global, now that 1.1.0 is out? 
  • MarcelTimmermansMarcelTimmermans Member
    Hi @MarcelTimmermans, is it possible to make the tags from this app global, now that 1.1.0 is out? 

    This is automaticly the case. It should be visible.
  • keverjeroenkeverjeroen Member
    Finally added the Atag One to Homey. Your app works great!
  • keverjeroenkeverjeroen Member
    Hi @MarcelTimmermans at portal.atag-one.com, there is a tab 'diagnostics' where I can see the 'DeltaT'. Thanks to this topic on Tweakers, I learned that DeltaT is. Is it possible to add DeltaT to the Homey app, so I can see it back in the insights? And also the 'Brander status' (on/off), would be great to see in the insights.
  • MarcelTimmermansMarcelTimmermans Member
    keverjeroen said:
    Hi @MarcelTimmermans at portal.atag-one.com, there is a tab 'diagnostics' where I can see the 'DeltaT'. Thanks to this topic on Tweakers, I learned that DeltaT is. Is it possible to add DeltaT to the Homey app, so I can see it back in the insights? And also the 'Brander status' (on/off), would be great to see in the insights.
    Hi, I thought this was not needed as I will show the 'aanvoer' and 'retour' temperature. But if you prefer the DeltaT I think this is possible. The "Brander Status" is more complex as it is somewhat encrypted. I will check this as well.
  • keverjeroenkeverjeroen Member
    It is not 'needed' indeed, I can simply calculate the DeltaT with the aanvoer and retour temp. But the DeltaT directly in the graph makes it even simpeler and clearer.
  • keverjeroenkeverjeroen Member
    Hi @MarcelTimmermans, during my vacation the app is updated. But now (since the update??) it looks like the app has no connection with my Atag thermostat anymore. All the readings in Homey from Atag are empty..
  • keverjeroenkeverjeroen Member
    edited August 2017
    I deleted the device from Homey and now i'm trying to add it again (in 1.5 RC2). The app finds my Atag on, but after I push Start Pairing, I see for a while Checking authorization, then that disapears and nothing happens.. Any idea whats wrong??

    -Edit- The app crashes when I pres Start Pairing. I've send you a log. Hope you can fix it! I really use your app a lot.
  • keverjeroenkeverjeroen Member
    Great to see the app is updated to 0.0.9 in the app store. Working great with the 1.5 firmware of Homey!
  • KikkerX10KikkerX10 Member
    Is it possible with this app to control the temperature? for instance when i enter my house the temperature on the ATAG one is set to 20 degrees C?
  • keverjeroenkeverjeroen Member
    KikkerX10 said:
    Is it possible with this app to control the temperature? for instance when i enter my house the temperature on the ATAG one is set to 20 degrees C?
    Yes, you can set the temperature of the Atag One. And it can read everything from the thermostat too. From temperature to water pressure.
  • Mdv1980Mdv1980 Member
    I also have trouble with pairing. It doesnt pair. I have also deleted the app and tried Again. No Result can someone help me 
  • MarcelTimmermansMarcelTimmermans Member
    Do you get an erMdv1980 said:
    I also have trouble with pairing. It doesnt pair. I have also deleted the app and tried Again. No Result can someone help me 
    do you get an error?  Can you tell me the steps you did?
Sign In or Register to comment.