The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Slow and/or no response for WALLC-S devices and fast battery drain
I have Homey 1.3.1 and ZWave.ME 0.1.1 installed and since release 1.3.1 of Homey experiencing the following issues:
- Switches are directly associated with Fibaro dimmers, but after a few (10-20) days not functioning any more. That is, when someone presses one of the buttons nothing happens.
- There is no low battery report in Homey.
- Sometimes, when pressing a switch it takes a while (2-10 seconds) before the dimmers respond.
- Also, sometimes the dimmers respond the first time a switch is pressed but don't respond to any presses after the first time it was presses.
- After replacing the battery I'm able to make the switches operate normally again.
- Some switches (either close or far away from Homey) do not display this behaviour.
My guess is that Z-Wave message handling is currently not being handled very efficiently. In the Homey "Network Graph" it is shown that nodes which are relatively far away from Homey communicate with Homey directly while it would be more efficient to communicate via another node. But this may not be the root cause, since some switches that are located in close vicinity of Homey (only 3 meters away) also display the same behaviour.
I'm not sure wheter this effect should be contributed to Homey version 1.3.1 and its changed Z-Wave implementation or the ZWave.ME app in particular. However, I'm currently only experiencing issues with the WALLC-S and WALLC-S v2 switches while my Fibaro and Aotec multisensors (also battery operated devices) are working without problems at this moment (knock on wood).
I think this may require much more investigating to find the cause of the problem. Any suggestions on how to proceed are very much welcome!
Comments
I think we need a better way to analyze ZWave logging. So that you can see device activity over a longer period of time.
Just bought this switch to use at home but im having problem to get it to work properly.
At first i got 2 out of 4 buttons to work but now none of the work (i see the switch trannsmit in the logging)
Could any of you using these switch please share your settings for the switch ?
Thanks !
https://forum.athom.com/discussion/2949/how-to-double-click-zwave-me-wallc-s-wallc-2-makes-8-possible-options#latest
greedings
Im having huge problem to get this switch to work properly, when pushin the buttons i can see in the zwave log in Homey that it receives the signal but it only intermitent activates the flows i´ve created linked to the button.
I can´t understand why (i tried to change the battery).
Example when button 2 was pressed:
Log button 2;
[2017-10-03T05:38:20.555Z] Node[4]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
[2017-10-03T05:38:20.556Z] Node[4]: sendData to COMMAND_CLASS_SECURITY, params 0x800f3d3f5e7aa159c6
[2017-10-03T05:38:20.557Z] Command[53] start: sendData
[2017-10-03T05:38:20.559Z] ProcessSendData[53]: To node: 4 with data: 0x98800f3d3f5e7aa159c6 and txOptions: ACK,AUTO_ROUTE
[2017-10-03T05:38:20.717Z] Command[53] end: sendData
[2017-10-03T05:38:20.768Z] Node[4]: Received application command for COMMAND_CLASS_SECURITY, data: 0xc18eecdf691ebd36cda5ba534a87380f2d6e9f26f9048cdb
{"zw_state":{"stats":{"processmanager":{"processQueue":0},"commands":{"commandsQueue":0}},"ver":5,"capabilities":{"api":"controller","timerSupported":false,"controllerType":"primary"},"nodes":[1,2,4,5,6],"chip_type":5,"chip_version":0,"homeId":4142704806,"nodeId":1,"nvr":[1,5,0,21,13,27,120,32,1,0,32,0,64,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,24,19,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,11,91],"CONTROLLER_IS_SECONDARY":false,"CONTROLLER_ON_OTHER_NETWORK":false,"CONTROLLER_NODEID_SERVER_PRESENT":true,"CONTROLLER_IS_REAL_PRIMARY":true,"CONTROLLER_IS_SUC":true,"NO_NODES_INCUDED":false,"sucId":1,"powerLevel":0,"version":"Z-Wave 3.99","networkKey":"c003ef9b980c9c7735f6c3ab065971d4","methodsAsync":["factoryReset","addNodeAbort","removeNodeAbort","replaceFailedNodeAbort","sendData","isFailedNode","getFailedNodes","ping"]},"zw_ready":true,"_stateTimestamp":1507009120946}
Example when button 3 was pressed
[2017-10-03T05:40:59.502Z] Node[4]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
[2017-10-03T05:40:59.503Z] Node[4]: sendData to COMMAND_CLASS_SECURITY, params 0x8013c3ffe3fdb64345
[2017-10-03T05:40:59.504Z] Command[57] start: sendData
[2017-10-03T05:40:59.505Z] ProcessSendData[57]: To node: 4 with data: 0x988013c3ffe3fdb64345 and txOptions: ACK,AUTO_ROUTE
[2017-10-03T05:41:00.039Z] Command[57] end: sendData
[2017-10-03T05:41:00.099Z] Node[4]: Received application command for COMMAND_CLASS_SECURITY, data: 0xc130b0b2508655d1683e7e07904664130a50bc0cf03aaea5
{"zw_state":{"stats":{"processmanager":{"processQueue":0},"commands":{"commandsQueue":0}},"ver":5,"capabilities":{"api":"controller","timerSupported":false,"controllerType":"primary"},"nodes":[1,2,4,5,6],"chip_type":5,"chip_version":0,"homeId":4142704806,"nodeId":1,"nvr":[1,5,0,21,13,27,120,32,1,0,32,0,64,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,24,19,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,11,91],"CONTROLLER_IS_SECONDARY":false,"CONTROLLER_ON_OTHER_NETWORK":false,"CONTROLLER_NODEID_SERVER_PRESENT":true,"CONTROLLER_IS_REAL_PRIMARY":true,"CONTROLLER_IS_SUC":true,"NO_NODES_INCUDED":false,"sucId":1,"powerLevel":0,"version":"Z-Wave 3.99","networkKey":"c003ef9b980c9c7735f6c3ab065971d4","methodsAsync":["factoryReset","addNodeAbort","removeNodeAbort","replaceFailedNodeAbort","sendData","isFailedNode","getFailedNodes","ping"]},"zw_ready":true,"_stateTimestamp":1507009260053}