›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Support for 433mhz temperature sensors

1235»

Comments

  • RamonBaasRamonBaas Member
    @goldstrike In general Orgeon Scientific sensors are good, but I also use TFA ones (e.g. 30.3150, Cresta protocol).
  • goldstrikegoldstrike Member
    RamonBaas said:
    @goldstrike In general Orgeon Scientific sensors are good, but I also use TFA ones (e.g. 30.3150, Cresta protocol).


    https://www.weerstationkopen.nl/accessoires-weerstations/tfa/tfa-320

    like this one?

  • RamonBaasRamonBaas Member
    The TFA-320 looks to be a different protocol, don't know if that one is supported yet. I was referring to this one: https://www.weerstationkopen.nl/accessoires-weerstations/tfa/303150-5-kan-sensor
  • goldstrikegoldstrike Member
    RamonBaas said:
    The TFA-320 looks to be a different protocol, don't know if that one is supported yet. I was referring to this one: https://www.weerstationkopen.nl/accessoires-weerstations/tfa/303150-5-kan-sensor


    oke thenxs

    what sensors i nead fore the sun,rain,wind so homey can see them

  • keverjeroenkeverjeroen Member
    Hi @RamonBaas, is the Cresta DTX320 supported by your app? https://www.thermostaatstore.nl/product/749521/cresta-dtx320.html

    I'm interested in this Cresta set becouse I can buy it for just €10,-.. <span>:open_mouth:</span>
  • goldstrikegoldstrike Member

    i have the oregon thn132n and the thgn132n and the homey cant find them
    what is rong

  • goldstrikegoldstrike Member

    i have the oregon thn132n and the thgn132n and the homey cant find them
    what is rong


      "signal": "Oregon Scientific v3",
      "enabled": true,
      "stats": {
       "total": 178,
       "ok": "0%",
       "error": "100%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:37:53.767Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:37:53.908Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:38:32.801Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:38:32.893Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,1,0,1,0,0,1,0,1,1,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1",
         "valid": false,
         "when": "2017-02-15T21:39:11.715Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:39:11.890Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0",
         "valid": false,
         "when": "2017-02-15T21:39:50.717Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:39:50.885Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:40:29.715Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T21:40:29.891Z"
        }
       ],
       "debug": [
        "[22:39:11.887] 102 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1]}",
        "[22:39:11.888] Removing incomplete nibble from message",
        "[22:39:11.889] data array length 100",
        "[22:39:11.890] Device id hex 1800",
        "[22:39:11.891] Error: Unknown sensor ID 1800; ignoring...",
        "[22:39:50.714] 101 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0]}",
        "[22:39:50.715] Removing incomplete nibble from message",
        "[22:39:50.716] data array length 100",
        "[22:39:50.717] Device id hex 1800",
        "[22:39:50.717] Error: Unknown sensor ID 1800; ignoring...",
        "[22:39:50.879] 102 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1]}",
        "[22:39:50.883] Removing incomplete nibble from message",
        "[22:39:50.884] data array length 100",
        "[22:39:50.885] Device id hex 1800",
        "[22:39:50.885] Error: Unknown sensor ID 1800; ignoring...",
        "[22:40:29.711] 102 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1]}",
        "[22:40:29.713] Removing incomplete nibble from message",
        "[22:40:29.713] data array length 100",
        "[22:40:29.714] Device id hex 1800",
        "[22:40:29.715] Error: Unknown sensor ID 1800; ignoring...",
        "[22:40:29.887] 102 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,1,0,0,0,0,0,0,1]}",
        "[22:40:29.889] Removing incomplete nibble from message",
        "[22:40:29.889] data array length 100",
        "[22:40:29.890] Device id hex 1800",
        "[22:40:29.891] Error: Unknown sensor ID 1800; ignoring..."
       ]
      }
     },
     {
  • RamonBaasRamonBaas Member
    @keverjeroen No clue, but you can always try for just €10
    @goldstrike Those should work with Oregon v2 support on. Any clue in the statistics json or debug logging?
  • goldstrikegoldstrike Member
    edited February 2017
    RamonBaas said:
    @keverjeroen No clue, but you can always try for just €10
    @goldstrike Those should work with Oregon v2 support on. Any clue in the statistics json or debug logging?

    log is empty   reboting homey nou


    "signal": "Oregon Scientific v2",
      "enabled": true,
      "stats": {
       "total": 0,
       "ok": "0%",
       "error": "0%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [],
       "debug": []
      }

  • goldstrikegoldstrike Member
    edited February 2017
    RamonBaas said:
    @keverjeroen No clue, but you can always try for just €10
    @goldstrike Those should work with Oregon v2 support on. Any clue in the statistics json or debug logging?

    log is empty   reboting homey nou


    "signal": "Oregon Scientific v2",
      "enabled": true,
      "stats": {
       "total": 0,
       "ok": "0%",
       "error": "0%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [],
       "debug": []
      }


    log is empty only selected oregon v2 now
  • goldstrikegoldstrike Member

    RamonBaas

      "signal": "Oregon Scientific v2",
      "enabled": true,
      "stats": {
       "total": 0,
       "ok": "0%",
       "error": "0%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [],
       "debug": []
      }
     },
     {
      "signal": "Oregon Scientific v3",
      "enabled": true,
      "stats": {
       "total": 9,
       "ok": "0%",
       "error": "100%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:18:06.689Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:18:06.846Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:18:33.039Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:19:14.050Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:19:14.224Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0",
         "valid": false,
         "when": "2017-02-15T22:19:53.054Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0",
         "valid": false,
         "when": "2017-02-15T22:19:53.262Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:20:32.046Z"
        },
        {
         "data": "1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1",
         "valid": false,
         "when": "2017-02-15T22:20:32.210Z"
        }
       ],
       "debug": [
        "[23:19:14.046] Removing incomplete nibble from message",
        "[23:19:14.048] data array length 104",
        "[23:19:14.049] Device id hex 1800",
        "[23:19:14.050] Error: Unknown sensor ID 1800; ignoring...",
        "[23:19:14.213] 105 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1]}",
        "[23:19:14.218] Removing incomplete nibble from message",
        "[23:19:14.222] data array length 104",
        "[23:19:14.223] Device id hex 1800",
        "[23:19:14.224] Error: Unknown sensor ID 1800; ignoring...",
        "[23:19:53.048] 105 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0]}",
        "[23:19:53.052] Removing incomplete nibble from message",
        "[23:19:53.052] data array length 104",
        "[23:19:53.053] Device id hex 1800",
        "[23:19:53.054] Error: Unknown sensor ID 1800; ignoring...",
        "[23:19:53.246] 105 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0]}",
        "[23:19:53.260] Removing incomplete nibble from message",
        "[23:19:53.261] data array length 104",
        "[23:19:53.262] Device id hex 1800",
        "[23:19:53.262] Error: Unknown sensor ID 1800; ignoring...",
        "[23:20:32.043] 104 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1]}",
        "[23:20:32.045] Device id hex 1800",
        "[23:20:32.046] Error: Unknown sensor ID 1800; ignoring...",
        "[23:20:32.208] 104 {'type':'Buffer','data':[1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,1]}",
        "[23:20:32.210] Device id hex 1800",
        "[23:20:32.210] Error: Unknown sensor ID 1800; ignoring..."
       ]
      }
     },
     {

  • goldstrikegoldstrike Member
     "signal": "Oregon Scientific v2",
      "enabled": true,
      "stats": {
       "total": 3,
       "ok": "0%",
       "error": "100%",
       "invalid": "0%",
       "lengths": {},
       "payloads": [
        {
         "data": "0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,0,1,1,0,1,0,0,1,0,1",
         "valid": false,
         "when": "2017-02-15T23:38:34.857Z"
        },
        {
         "data": "0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1",
         "valid": false,
         "when": "2017-02-15T23:42:28.871Z"
        },
        {
         "data": "0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1",
         "valid": false,
         "when": "2017-02-15T23:45:43.805Z"
        }
       ],
       "debug": [
        "[00:38:34.834] 152 {'type':'Buffer','data':[0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,0,1,1,0,1,0,0,1,0,1]}",
        "[00:38:34.849] array length after making even 152",
        "[00:38:34.851] array length after removing uneven bits 76",
        "[00:38:34.856] Device id hex e2df",
        "[00:38:34.857] Error: Unknown sensor ID e2df; ignoring...",
        "[00:42:28.864] 152 {'type':'Buffer','data':[0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1]}",
        "[00:42:28.869] array length after making even 152",
        "[00:42:28.870] array length after removing uneven bits 76",
        "[00:42:28.871] Device id hex e2df",
        "[00:42:28.871] Error: Unknown sensor ID e2df; ignoring...",
        "[00:45:43.796] 152 {'type':'Buffer','data':[0,1,1,0,1,0,1,0,0,1,1,0,0,1,0,1,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1,1,0,1,0,1,0,1,0,0,1,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,0,1,1,0,1,0,1,0,1,0,1,0,1,0,1,0,0,1,1,0,0,1,1,0,1,0,0,1,0,1,0,1,0,1,0,1]}",
        "[00:45:43.801] array length after making even 152",
        "[00:45:43.802] array length after removing uneven bits 76",
        "[00:45:43.804] Device id hex e2df",
        "[00:45:43.805] Error: Unknown sensor ID e2df; ignoring..."
       ]
      }
  • RamonBaasRamonBaas Member
    @goldstike: The sensor ID for the thgn132n should be 1a2d with the v2 protocol. Strange to not see this back. Just noticed that I still need to add the data layout for this sensor type.
  • goldstrikegoldstrike Member
    edited February 2017
    RamonBaas said:
    @goldstike: The sensor ID for the thgn132n should be 1a2d with the v2 protocol. Strange to not see this back. Just noticed that I still need to add the data layout for this sensor type.


    oke tel me when i can update the homey.
    and the sensor thn132n i have?

    do you nead logs?

  • RamonBaasRamonBaas Member
    App is now available in the App Store. @keverjeroen UPM (WT440H) is also supported now.
  • RamonBaasRamonBaas Member
    App discussion can continue here.
Sign In or Register to comment.