This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Official Z-Wave CommunityApp
Comments
Detect finished dryer or washing machine
https://forum.athom.com/discussion/2673/detect-finished-dryer-or-washing-machineIt's rather a long post, but it explains in detail how to tackle this problem (the repeating done-start-done messages).
that was the place i told i was going to try anyway
Just did as asked. Results <span></span>
com.neo running...
[debug] ------------------------------------------
[debug] Node: f84a970e-dc91-4158-912a-3e2ed0caabc9
[debug] - Battery: false
[debug] - CommandClass: COMMAND_CLASS_ZWAVEPLUS_INFO
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- ZWAVEPLUS_INFO_GET
[debug] --- ZWAVEPLUS_INFO_REPORT
[debug] - CommandClass: COMMAND_CLASS_SWITCH_BINARY
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- SWITCH_BINARY_GET
[debug] --- SWITCH_BINARY_REPORT
[debug] --- SWITCH_BINARY_SET
[debug] - CommandClass: COMMAND_CLASS_BASIC
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- BASIC_GET
[debug] --- BASIC_REPORT
[debug] --- BASIC_SET
[debug] - CommandClass: COMMAND_CLASS_ASSOCIATION
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- ASSOCIATION_GET
[debug] --- ASSOCIATION_GROUPINGS_GET
[debug] --- ASSOCIATION_GROUPINGS_REPORT
[debug] --- ASSOCIATION_REMOVE
[debug] --- ASSOCIATION_REPORT
[debug] --- ASSOCIATION_SET
[debug] --- ASSOCIATION_SPECIFIC_GROUP_GET
[debug] --- ASSOCIATION_SPECIFIC_GROUP_REPORT
[debug] - CommandClass: COMMAND_CLASS_ASSOCIATION_GRP_INFO
[debug] -- Version: 1
[debug] -- Commands:
[debug] --- ASSOCIATION_GROUP_NAME_GET
[debug] --- ASSOCIATION_GROUP_NAME_REPORT
[debug] --- ASSOCIATION_GROUP_INFO_GET
[debug] --- ASSOCIATION_GROUP_INFO_REPORT
[debug] --- ASSOCIATION_GROUP_COMMAND_LIST_GET
[debug] --- ASSOCIATION_GROUP_COMMAND_LIST_REPORT
[debug] - CommandClass: COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
[debug] -- Version: 3
[debug] -- Commands:
[debug] --- MULTI_CHANNEL_ASSOCIATION_GET
[debug] --- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_GET
[debug] --- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_REPORT
[debug] --- MULTI_CHANNEL_ASSOCIATION_REMOVE
[debug] --- MULTI_CHANNEL_ASSOCIATION_REPORT
[debug] --- MULTI_CHANNEL_ASSOCIATION_SET
[debug] ------------------------------------------
[debug]
[debug] COMMAND_CLASS_SWITCH_BINARY->SWITCH_BINARY_GET args: {} cb: true
[debug] ------------------------------------------
[debug] Node: d0e7685e-ed65-49d4-8c96-e04f041fc129
[debug] - Battery: false
[debug] - CommandClass: COMMAND_CLASS_ZWAVEPLUS_INFO
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- ZWAVEPLUS_INFO_GET
[debug] --- ZWAVEPLUS_INFO_REPORT
[debug] - CommandClass: COMMAND_CLASS_SWITCH_BINARY
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- SWITCH_BINARY_GET
[debug] --- SWITCH_BINARY_REPORT
[debug] --- SWITCH_BINARY_SET
[debug] - CommandClass: COMMAND_CLASS_ASSOCIATION
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- ASSOCIATION_GET
[debug] --- ASSOCIATION_GROUPINGS_GET
[debug] --- ASSOCIATION_GROUPINGS_REPORT
[debug] --- ASSOCIATION_REMOVE
[debug] --- ASSOCIATION_REPORT
[debug] --- ASSOCIATION_SET
[debug] --- ASSOCIATION_SPECIFIC_GROUP_GET
[debug] --- ASSOCIATION_SPECIFIC_GROUP_REPORT
[debug] - CommandClass: COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
[debug] -- Version: 3
[debug] -- Commands:
[debug] --- MULTI_CHANNEL_ASSOCIATION_GET
[debug] --- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_GET
[debug] --- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_REPORT
[debug] --- MULTI_CHANNEL_ASSOCIATION_REMOVE
[debug] --- MULTI_CHANNEL_ASSOCIATION_REPORT
[debug] --- MULTI_CHANNEL_ASSOCIATION_SET
[debug] - CommandClass: COMMAND_CLASS_ASSOCIATION_GRP_INFO
[debug] -- Version: 1
[debug] -- Commands:
[debug] --- ASSOCIATION_GROUP_NAME_GET
[debug] --- ASSOCIATION_GROUP_NAME_REPORT
[debug] --- ASSOCIATION_GROUP_INFO_GET
[debug] --- ASSOCIATION_GROUP_INFO_REPORT
[debug] --- ASSOCIATION_GROUP_COMMAND_LIST_GET
[debug] --- ASSOCIATION_GROUP_COMMAND_LIST_REPORT
[debug] - CommandClass: COMMAND_CLASS_VERSION
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- VERSION_COMMAND_CLASS_GET
[debug] --- VERSION_COMMAND_CLASS_REPORT
[debug] --- VERSION_GET
[debug] --- VERSION_REPORT
[debug] - CommandClass: COMMAND_CLASS_MANUFACTURER_SPECIFIC
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- MANUFACTURER_SPECIFIC_GET
[debug] --- MANUFACTURER_SPECIFIC_REPORT
[debug] --- DEVICE_SPECIFIC_GET
[debug] --- DEVICE_SPECIFIC_REPORT
[debug] - CommandClass: COMMAND_CLASS_DEVICE_RESET_LOCALLY
[debug] -- Version: 1
[debug] -- Commands:
[debug] --- DEVICE_RESET_LOCALLY_NOTIFICATION
[debug] - CommandClass: COMMAND_CLASS_POWERLEVEL
[debug] -- Version: 1
[debug] -- Commands:
[debug] --- POWERLEVEL_GET
[debug] --- POWERLEVEL_REPORT
[debug] --- POWERLEVEL_SET
[debug] --- POWERLEVEL_TEST_NODE_GET
[debug] --- POWERLEVEL_TEST_NODE_REPORT
[debug] --- POWERLEVEL_TEST_NODE_SET
[debug] - CommandClass: COMMAND_CLASS_MULTI_CHANNEL
[debug] -- Version: 4
[debug] -- Commands:
[debug] --- MULTI_CHANNEL_CAPABILITY_GET
[debug] --- MULTI_CHANNEL_CAPABILITY_REPORT
[debug] --- MULTI_CHANNEL_CMD_ENCAP
[debug] --- MULTI_CHANNEL_END_POINT_FIND
[debug] --- MULTI_CHANNEL_END_POINT_FIND_REPORT
[debug] --- MULTI_CHANNEL_END_POINT_GET
[debug] --- MULTI_CHANNEL_END_POINT_REPORT
[debug] --- MULTI_INSTANCE_CMD_ENCAP
[debug] --- MULTI_INSTANCE_GET
[debug] --- MULTI_INSTANCE_REPORT
[debug] --- MULTI_CHANNEL_AGGREGATED_MEMBERS_GET
[debug] --- MULTI_CHANNEL_AGGREGATED_MEMBERS_REPORT
[debug] - CommandClass: COMMAND_CLASS_CONFIGURATION
[debug] -- Version: 3
[debug] -- Commands:
[debug] --- CONFIGURATION_BULK_GET
[debug] --- CONFIGURATION_BULK_REPORT
[debug] --- CONFIGURATION_BULK_SET
[debug] --- CONFIGURATION_GET
[debug] --- CONFIGURATION_REPORT
[debug] --- CONFIGURATION_SET
[debug] --- CONFIGURATION_NAME_GET
[debug] --- CONFIGURATION_NAME_REPORT
[debug] --- CONFIGURATION_INFO_GET
[debug] --- CONFIGURATION_INFO_REPORT
[debug] --- CONFIGURATION_PROPERTIES_GET
[debug] --- CONFIGURATION_PROPERTIES_REPORT
[debug] - CommandClass: COMMAND_CLASS_BASIC
[debug] -- Version: 2
[debug] -- Commands:
[debug] --- BASIC_GET
[debug] --- BASIC_REPORT
[debug] --- BASIC_SET
[debug] - MultiChannelNode: 1
[debug] -- CommandClass: COMMAND_CLASS_ZWAVEPLUS_INFO
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- ZWAVEPLUS_INFO_GET
[debug] ---- ZWAVEPLUS_INFO_REPORT
[debug] -- CommandClass: COMMAND_CLASS_SWITCH_BINARY
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- SWITCH_BINARY_GET
[debug] ---- SWITCH_BINARY_REPORT
[debug] ---- SWITCH_BINARY_SET
[debug] -- CommandClass: COMMAND_CLASS_BASIC
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- BASIC_GET
[debug] ---- BASIC_REPORT
[debug] ---- BASIC_SET
[debug] -- CommandClass: COMMAND_CLASS_ASSOCIATION
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- ASSOCIATION_GET
[debug] ---- ASSOCIATION_GROUPINGS_GET
[debug] ---- ASSOCIATION_GROUPINGS_REPORT
[debug] ---- ASSOCIATION_REMOVE
[debug] ---- ASSOCIATION_REPORT
[debug] ---- ASSOCIATION_SET
[debug] ---- ASSOCIATION_SPECIFIC_GROUP_GET
[debug] ---- ASSOCIATION_SPECIFIC_GROUP_REPORT
[debug] -- CommandClass: COMMAND_CLASS_ASSOCIATION_GRP_INFO
[debug] --- Version: 1
[debug] --- Commands:
[debug] ---- ASSOCIATION_GROUP_NAME_GET
[debug] ---- ASSOCIATION_GROUP_NAME_REPORT
[debug] ---- ASSOCIATION_GROUP_INFO_GET
[debug] ---- ASSOCIATION_GROUP_INFO_REPORT
[debug] ---- ASSOCIATION_GROUP_COMMAND_LIST_GET
[debug] ---- ASSOCIATION_GROUP_COMMAND_LIST_REPORT
[debug] -- CommandClass: COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
[debug] --- Version: 3
[debug] --- Commands:
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GET
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_GET
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_REPORT
[debug] ---- MULTI_CHANNEL_ASSOCIATION_REMOVE
[debug] ---- MULTI_CHANNEL_ASSOCIATION_REPORT
[debug] ---- MULTI_CHANNEL_ASSOCIATION_SET
[debug] - MultiChannelNode: 2
[debug] -- CommandClass: COMMAND_CLASS_ZWAVEPLUS_INFO
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- ZWAVEPLUS_INFO_GET
[debug] ---- ZWAVEPLUS_INFO_REPORT
[debug] -- CommandClass: COMMAND_CLASS_SWITCH_BINARY
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- SWITCH_BINARY_GET
[debug] ---- SWITCH_BINARY_REPORT
[debug] ---- SWITCH_BINARY_SET
[debug] -- CommandClass: COMMAND_CLASS_BASIC
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- BASIC_GET
[debug] ---- BASIC_REPORT
[debug] ---- BASIC_SET
[debug] -- CommandClass: COMMAND_CLASS_ASSOCIATION
[debug] --- Version: 2
[debug] --- Commands:
[debug] ---- ASSOCIATION_GET
[debug] ---- ASSOCIATION_GROUPINGS_GET
[debug] ---- ASSOCIATION_GROUPINGS_REPORT
[debug] ---- ASSOCIATION_REMOVE
[debug] ---- ASSOCIATION_REPORT
[debug] ---- ASSOCIATION_SET
[debug] ---- ASSOCIATION_SPECIFIC_GROUP_GET
[debug] ---- ASSOCIATION_SPECIFIC_GROUP_REPORT
[debug] -- CommandClass: COMMAND_CLASS_ASSOCIATION_GRP_INFO
[debug] --- Version: 1
[debug] --- Commands:
[debug] ---- ASSOCIATION_GROUP_NAME_GET
[debug] ---- ASSOCIATION_GROUP_NAME_REPORT
[debug] ---- ASSOCIATION_GROUP_INFO_GET
[debug] ---- ASSOCIATION_GROUP_INFO_REPORT
[debug] ---- ASSOCIATION_GROUP_COMMAND_LIST_GET
[debug] ---- ASSOCIATION_GROUP_COMMAND_LIST_REPORT
[debug] -- CommandClass: COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION
[debug] --- Version: 3
[debug] --- Commands:
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GET
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_GET
[debug] ---- MULTI_CHANNEL_ASSOCIATION_GROUPINGS_REPORT
[debug] ---- MULTI_CHANNEL_ASSOCIATION_REMOVE
[debug] ---- MULTI_CHANNEL_ASSOCIATION_REPORT
[debug] ---- MULTI_CHANNEL_ASSOCIATION_SET
[debug] ------------------------------------------
[debug]
[debug] COMMAND_CLASS_SWITCH_BINARY->SWITCH_BINARY_GET args: {} cb: true
[debug] COMMAND_CLASS_SWITCH_BINARY SWITCH_BINARY_GET args: {} err: null result: { 'Current Value (Raw)': <Buffer 00>,
'Current Value': 'off/disable' }
[debug] get onoff
[debug] get onoff
[debug] get onoff
[debug] get onoff
[debug] get onoff
[debug] get onoff
[debug] COMMAND_CLASS_SWITCH_BINARY SWITCH_BINARY_GET args: {} err: null result: { 'Current Value (Raw)': <Buffer 00>,
'Current Value': 'off/disable' }
[debug] node.MultiChannelNodes['1'].
CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer ff>,
'Current Value': 'on/enable' },
'2': null }
[debug] node.MultiChannelNodes['1'].
CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer 00>,
'Current Value': 'off/disable' },
'2': null }
[debug] node.CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer ff>,
'Current Value': 'on/enable' },
'2': null }
[debug] node.MultiChannelNodes['2'].
CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer ff>,
'Current Value': 'on/enable' },
'2': null }
[debug] node.CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer 00>,
'Current Value': 'off/disable' },
'2': null }
[debug] node.MultiChannelNodes['2'].
CommandClass['COMMAND_CLASS_SWITCH_BINARY'].on('report') arguments: { '0': { value: 3, name: 'SWITCH_BINARY_REPORT' },
'1':
{ 'Current Value (Raw)': <Buffer 00>,
'Current Value': 'off/disable' },
'2': null }
Did you do a re-pair of the device with the latest github ?
The flow works perfect as you can see.
But when using the wall switch it is not working, but i think i know why.
I want to use this wall switch as a "remote control" for my flow but that is not possible because this is a "switch" .
So it does not send a signal to Homey to start or stop a flow that triggers another switch...
Nothing lost however, will use these 2 switches on another location in the house.
Just to check if i get it right....
If you make a flow like. "When Bla then Turn On S1" and "When Bla then Turn On S2" it works ?
But if you make a flow : "When S1 switched then "speak hoera" it doesnt ?
Thinking about testing it with better logic flow in the way that when S1 is switched to on start flow X or when S1 switched on set variable to light on.
But have not much time to test the next days.
So making a flow to start on a flip of a switch does not work.
But making a flow that switches the switch does ?
http://s.aliexpress.com/MJjeaYvy
seems like the new one. But where is the difference? Bad design or the higher price won't be the answer...
do you know it?
The only manual / more detailed description I'm able to find is at the FCC... but in fact this is the manual of the NAS-PD01Z* (no updated product ID mentioned). No registration of the NAS-PD02Z* at the Z-wave alliance.
I've requested for additional information at Shenzhen NEO electronics.
Based on the pictures at Aliexpress, I would guess it is (internally) the same motion sensor, with updated housing (facet style) and ability to have it ceiling mounted with the additional half-dome sphere.
If I receive additional information, I will let you know.
@phil_s i have one on its way. Somewhere on the train to Russia i guess.
Info is already on https://fccid.io/Z52NAS-PD02Z
Not yet certified by the zwave Alliance
Dont start ordering yet, because when you order at the store you will not get a EU version but a US version.
I got send a EU test version and there not selling the ZE version yet
Neither does it have a temp sensor
I was told its only the second revision and the new Production run.
They did some small redesigns for better range wide angle on detection.
Also the managed to cut down the Production costs to around 12,50 and will be selling them for 15 euro's to there distributors if they order large numbers. So we could expect a pricedrop again in the next months i hope.
just wondered because of its design and price at ali.
ok, then we will see ;-)
Dit you include the Neo wall switches with Lights connected to it or with other devices connected to it?
Current limitation within Homey is that the Light class does not include power measuring / meter capabilities.
The other class will provide these capabilities.
I didn't know that! Will try.
Other option is to put it into a custom mobile card. but then people cant add them as light anymore and homey will not include the socket in the ok homey all lights out or bla light out.
26,09 €
https://www.aliexpress.com/item/-/32780283869.html?scm=1007.14594.75834.0&pvid=73dc459d-e799-4bdf-b4e1-72417cc4b7e4
:-)
Others and myself are monitoring the washer.
I monitor my 2 washers and 2 dryers and never had a strange reading like that.
But everything is possible. could also be youre washers is producing some weird feedback signal where the neo somehow gives a response to that caluclates the usage wrong. Does it happen always or just this once ?
Can it be related that the power plug is on the edge of the Z-wave range ?
I have ordered another power plug to put in the middle of homey and the washer.
So is this the expected quality because it's cheap Chinese clone? That would be a bummer, it tooked 7 weeks to get here haha. But if so, is there anybody who can confirm the Fibaro original is way better? In that case I'm done with this clone and will buy Fibaro's. But because they aren't cheap I would like to check it first..
1 single NEO plug + homey is mostly (very) poor range. Several NEO plugs and other 240V powered devices makes a big difference, homey + the devices then build a mesh.
I had the same doubts when my 1st NEO plug arrived
I'm not able to do a direct comparison, but common feedback here is that the range is equal to the Fibaro's