This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Closed Official Z-Wave SDK2
[APP] Hank Tech app - Main discussion topic (v1.1.0)
TedTolboom
Member
Hank Tech
This app adds support for Z-wave devices made by Hank Tech.
Links:
Supported devices:
Hank Scene controller 4 and 1 button version (HKZW-SCN04 & HKZW-SCN01)
With the Hank Scene controller it is possible control any other devices (including non-Zwave) or set states / variables via Homey's flows.
The following triggers are supported:
- Button Pressed 1x
- Button held down
- Button released
- Any button pressed (including tokens)
The following conditions are supported:
- Battery alarm activated | Battery in healthy condition
Note:
All commands will be send to Homey.
With this device it is possible to associate buttons to other devices to control them directly (without Homey).
All commands will be send to Homey.
With this device it is possible to associate buttons to other devices to control them directly (without Homey).
Hank Door / Window sensor (HKZW-DWS01)
Door / Window sensor providing contact and tamper alarm.
Hank MultiSensor (HKZW-MS01)
MultiSensor providing motion, illumination, temperature and humidity data for Homey.
Hank Motion Sensor (HKZW-MS02)
Motion sensor providing motion alarm for Homey.
Hank Smart plug (HKZW-SO0x)
Smart plug, including 2 USB ports, providing meter data as well as RGB led indication
Hank Flood sensor (HKZW-FLD01)
Flood Sensor providing flooding-, tamper- and heat-alarm and temperature data for Homey.
Supported Languages:
- English
- Dutch
Supported Z-wave regions:
- Europe
- U.S./Canada/Mexico
Acknowledgements:
This app and driver development has been supported by:
- Robbshop by providing a the devices for debugging:
Feedback:
Any requests please post them in the [Hank app topic on the Athom Forum or contact me on Slack
If possible, please report issues at the issues section on Github otherwise in the above mentioned topic.
Donate:
If you like the app, consider a donation to support further development
Changelog:
v1.1.0 * Add support for the new Hank motion sensor (HKZW-MS02) * Add support for the new Hank flood sensor (HKZW-FLD01) * Update meshdriver to 1.2.10 v1.0.3 * Fix issue with SCN01 flow card trigger v1.0.2 * Add Homey community forum link * Update meshdriver to 1.2.8 * Driver clean-up & SDK2 optimizations v1.0.1 Change Scene Controller device class to Sensor to enable default battery triggers (re-pair required) v1.0.0
* App store release
Future work:
* Add RGB bulb
This discussion has been closed.
Comments
Super, I'm ordering a couple of 1 button version, and will be testing soon..
There is no battery (change) level trigger to monitor the battery level and send a push message to a phone yet?
Any examples on how to use device in flows (scenes)?
And nice catch on the battery level trigger...
Normally this is a default trigger card linked to the "measure_battery" capability.
I guess that since I use the "zwavecontroller" class (instead of sensor), this trigger card is absent.
I'll have a look into it.
In addition, I plan to include a 'battery alarm trigger' card as well as a 'key held' condition card (to facilitate dim / volume up and down options)
Have not figured out what to do with the button release trigger yet, and indeed no battery indication.
But very happy already :-)
I just submitted an small app update (change of device class zwavecontroller to sensor) for approval to the app store that will add the default battery notification trigger cards to the Scene controllers.
A re-pair of the scene controller is required to implement this change.
greetins,
Aaron
I did, they told me they were not ordering them because there were not enough people wanting them....strange.
If you don't sell them nobody can buy them, not everybody is going to leaver their email address. I only did that after waiting so long. Thanks for you response, guess you don't know where to get them either
greetings,
Aaron
I also see some additional products being announced in their store, so it might change.
Oke, thanks. I will do that. Seems to me it is the best Multisensor. It has a nice price, good amount of sensors (depends on what you need) and can be fed by mains or battery.
On the RGB bulb: this is being worked on... need to solve 1 last issue.
checked a few times to see if they were available.. guess they’re now...
will pickup the water and new motions sensor next week at Robbshop.nl and add them to the app
If you'd like, you could give it a try..
Great app once again. Nice how you and Robbshop work together to make these apps and support these devices.
I have a question about the Hank smart plug. Is the usb power data also available in the meter report? So when I only lug in an usb device will the power usage be reported? And secondly is it reported separate for each usb and the main power socket or all together?
I'm not really sure if the USB power is collected in the meter report....
It provides only a single energy report; so no separate logging of the energy state
Please take the following steps for each device:
Changelog:
https://community.athom.com/t/162