Z-Wave network broken - Firmware 1.2.0-rc.12

Kay-Arne

Hi all,

I just installed firmware version 1.2.0-rc.12 and now all the devices on Z-wave seem to have problems.
When trying to turn on a light using Home or use the S2 switch nothing happens.
The problem persists on all different Z-wave products I use (greenwave, Neo Coolcam and Fibaro).

Underneat a part of the Z-Wave log, its the "Watchdog module reset: Error: timeout" that worries me most.

[2017-04-11T16:39:32.614Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x0221440000003a00790000003a
[2017-04-11T16:39:33.607Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02215400000000007900000000
[2017-04-11T16:39:34.601Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02a14257e2007957e4
[2017-04-11T16:39:35.601Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02a14a000000790000
[2017-04-11T16:39:50.969Z] Command start: ping
[2017-04-11T16:40:20.975Z] Command end: ping
[2017-04-11T16:40:20.979Z] Watchdog module reset: Error: timeout
[2017-04-11T16:40:50.980Z] Command start: ping
[2017-04-11T16:41:20.986Z] Command end: ping
[2017-04-11T16:41:20.990Z] Watchdog module reset: Error: timeout
[2017-04-11T16:41:20.990Z] Command start: removeNode
[2017-04-11T16:41:29.386Z] Node[41]: Received application command for COMMAND_CLASS_METER, data: 0x02214400000098007900000098
[2017-04-11T16:41:30.376Z] Node[41]: Received application command for COMMAND_CLASS_METER, data: 0x02215400000000007900000000
[2017-04-11T16:41:31.374Z] Node[41]: Received application command for COMMAND_CLASS_METER, data: 0x02a142575800795770
[2017-04-11T16:41:32.375Z] Node[41]: Received application command for COMMAND_CLASS_METER, data: 0x02a14a000000790000
[2017-04-11T16:41:32.608Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x0221440000003a00790000003a
[2017-04-11T16:41:33.592Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02215400000000007900000000
[2017-04-11T16:41:34.590Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02a14257d3007957e2
[2017-04-11T16:41:35.589Z] Node[39]: Received application command for COMMAND_CLASS_METER, data: 0x02a14a000000790000

Anyone any ideas?

lubbertkramer

Watchdog has been added to RC12, stated in the changelog https://firmware.athom.com/ But as you are on experimental you can try the new update, 1.2 (as it will go to stable) has been pushed out by Athom.

Also you can better make a issue on Github for this so they can take care of your problem.

TedTolboom

@Kay-Arne did you reboot Homey after the update?
And how much time did you wait before testing it after update / reboot?

I had a similar experience (no devices responding), rebooted Homey and waited for the Z-wave network to start-up completely (can take 15 minutes)... and now it's working OK 

Kay-Arne

Thanks for you help! As @lubbertkramer mentioned the RC12 update had been "superseeded" by a all shiny and new 1.2 update! I installed this new 1.2 version and the problems are gone now! Also there are not records being logged about watchdog anymore, so all seems good! Like @TedTolboom I also experience the Z-Wave network taking quite some time to work fully. Not a real problem but just something to keep in mind when restarting Homey