When will I be able to use my Fibaro Motion Sensors?

G4nd41f

I have 5 Fibaro motion sensors (Z-Wave Plus version). Neither am I able to change the settings (https://github.com/athombv/homey/issues/1145) nor can I see the status of the motion/tamper alarm (https://github.com/athombv/homey/issues/1299). Therefore they are mostly useless. I can only use some of them to monitor temperature (not all are showing it) and the illuminaton. Am I the only one experiencing these problems? Can I expect this to be fixed?

Most things are working really fine with Homey (apart from speech, but I don't use that), but this something that annoys me for quite some time now.

Besides the Sensors, I have one Roller Shutter 2, one Wall Plug and one Relay Switch. So I have a couple of wall plug devices that should enhance my Z-wave network range and they are working perfectly. The only other Z-wave components in my network are two Danfoss LC-13 (showing the E5 error from time to time).

Floodnl

Strange i have the multisensor  (https://www.bol.com/nl/p/fibaro-z-wave-multi-sensor/9200000030719450/?suggestionType=typedsearch)  and this one is working fine everything works on it.  

YvesGeffens

Working without issues here for about one week.

MrDutchfighter

I've also had issues with my motion sensors. Last weekend I was so fed up with them that I removed them from Homey and repaired them. After this I changed the settings (didn't press save yet), then woke up the sensor manually (while laying about 2 meters away from Homey), pressed save and after a while they magically worked

Hope it helps.

chrisnash

I've tried all the methods suggested and never managed to change the default settings.
That said I had been more stable recently but still occasionally doesn't trigger my lights.
I've found the Hue sensor much more reliable