›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Vision garage door sensor

mightymarc2005mightymarc2005 Member
in Devices
hi there is this cool Vision garage door sensor that switches when it goes from horizontal to vertical position. And it's Z-wave. I couldn't find any info on the forum about this sensor and there is no app yet for Vision equipment yet. Is anyone working on this brand?

Comments

  • bvbbvb Member

    I have bought this sensor (Vision VIS_ZG8101) and added it as generic Z-Wave Device. It was noticed as a binary sensor, but I can not receive the Status. The device Icon Shows more like a on/off Switch which I can turn on and off, but does not receive any Status update.

    Any help to make this sensor working with an App?

    Settings:

    Device:


  • Priknr1Priknr1 Member
    edited April 2017
    I already have added this device to the Vision security app. But the owner of the app has been offline for months. I contacted Athom a couple of days ago,  if the owner has not responded in the next week, Athom will take ownership of the app, and the addition I made will be committed in the app.

    In short:  be patient, It will be there soon!!
  • bvbbvb Member
    Ok, thanks a lot for your help.
  • Priknr1Priknr1 Member
    If you cant wait, and know how to install it yourself:
    https://github.com/priknr1/com.visionsecurity

  • bvbbvb Member

    @priknr1

    I sideloaded the app. Excluded the door sensor and added it again.

    After the inclusion, the sensor was not reacting any more and the status in the app also did not Change on movement.
    I would expect that the sensor LED blink when it changes the Position. This is not happen after inclusion any more, although the Checkbox in the Setting is marked.

    How can I help to find a working solution?
    Any ideas?


    Below the Protokoll:

    Command start: addNode
    [2017-04-16T10:33:02.581Z] command status: addNode, status: ADD_NODE_STATUS_LEARN_READY
    [2017-04-16T10:33:04.601Z] command status: addNode, status: ADD_NODE_STATUS_NODE_FOUND
    [2017-04-16T10:33:04.920Z] command status: addNode, status: ADD_NODE_STATUS_ADDING_SLAVE
    [2017-04-16T10:33:07.045Z] command status: addNode, status: ADD_NODE_STATUS_PROTOCOL_DONE
    [2017-04-16T10:33:07.104Z] command status: addNode, status: ADD_NODE_STATUS_DONE
    [2017-04-16T10:33:07.642Z] command status: addNode, status: INTERVIEW_CC
    [2017-04-16T10:33:07.645Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1371
    [2017-04-16T10:33:07.646Z] Command start: sendData
    [2017-04-16T10:33:07.652Z] ProcessSendData[622]: To node: 26 with data: 0x861371 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:07.686Z] Command end: sendData
    [2017-04-16T10:33:07.716Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x147102
    [2017-04-16T10:33:07.736Z] command status: addNode, status: INTERVIEW_CC_1_OF_8
    [2017-04-16T10:33:07.741Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1385
    [2017-04-16T10:33:07.743Z] Command start: sendData
    [2017-04-16T10:33:07.765Z] ProcessSendData[623]: To node: 26 with data: 0x861385 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:07.832Z] Command end: sendData
    [2017-04-16T10:33:07.882Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x148501
    [2017-04-16T10:33:07.886Z] command status: addNode, status: INTERVIEW_CC_2_OF_8
    [2017-04-16T10:33:07.888Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1380
    [2017-04-16T10:33:07.889Z] Command start: sendData
    [2017-04-16T10:33:07.898Z] ProcessSendData[624]: To node: 26 with data: 0x861380 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:07.935Z] Command end: sendData
    [2017-04-16T10:33:07.953Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x148001
    [2017-04-16T10:33:07.957Z] command status: addNode, status: INTERVIEW_CC_3_OF_8
    [2017-04-16T10:33:07.958Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1372
    [2017-04-16T10:33:07.959Z] Command start: sendData
    [2017-04-16T10:33:07.964Z] ProcessSendData[625]: To node: 26 with data: 0x861372 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:07.992Z] Command end: sendData
    [2017-04-16T10:33:08.013Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x147201
    [2017-04-16T10:33:08.016Z] command status: addNode, status: INTERVIEW_CC_4_OF_8
    [2017-04-16T10:33:08.017Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1330
    [2017-04-16T10:33:08.017Z] Command start: sendData
    [2017-04-16T10:33:08.022Z] ProcessSendData[626]: To node: 26 with data: 0x861330 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.051Z] Command end: sendData
    [2017-04-16T10:33:08.077Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x143001
    [2017-04-16T10:33:08.079Z] command status: addNode, status: INTERVIEW_CC_5_OF_8
    [2017-04-16T10:33:08.083Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1386
    [2017-04-16T10:33:08.084Z] Command start: sendData
    [2017-04-16T10:33:08.089Z] ProcessSendData[627]: To node: 26 with data: 0x861386 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.118Z] Command end: sendData
    [2017-04-16T10:33:08.139Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x148601
    [2017-04-16T10:33:08.141Z] command status: addNode, status: INTERVIEW_CC_6_OF_8
    [2017-04-16T10:33:08.142Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1384
    [2017-04-16T10:33:08.142Z] Command start: sendData
    [2017-04-16T10:33:08.149Z] ProcessSendData[628]: To node: 26 with data: 0x861384 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.177Z] Command end: sendData
    [2017-04-16T10:33:08.197Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x148402
    [2017-04-16T10:33:08.200Z] command status: addNode, status: INTERVIEW_CC_7_OF_8
    [2017-04-16T10:33:08.201Z] Node[26]: sendData to COMMAND_CLASS_VERSION, params 0x1320
    [2017-04-16T10:33:08.202Z] Command start: sendData
    [2017-04-16T10:33:08.210Z] ProcessSendData[629]: To node: 26 with data: 0x861320 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.238Z] Command end: sendData
    [2017-04-16T10:33:08.259Z] Node[26]: Received application command for COMMAND_CLASS_VERSION, data: 0x142001
    [2017-04-16T10:33:08.261Z] command status: addNode, status: INTERVIEW_CC_8_OF_8
    [2017-04-16T10:33:08.473Z] command status: addNode, status: INTERVIEW_MANUFACTURER_SPECIFIC
    [2017-04-16T10:33:08.473Z] Node[26]: sendData to COMMAND_CLASS_MANUFACTURER_SPECIFIC, params 0x0404
    [2017-04-16T10:33:08.474Z] Command start: sendData
    [2017-04-16T10:33:08.482Z] ProcessSendData[630]: To node: 26 with data: 0x720404 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.520Z] Command end: sendData
    [2017-04-16T10:33:08.540Z] Node[26]: Received application command for COMMAND_CLASS_MANUFACTURER_SPECIFIC, data: 0x050109200a0a02
    [2017-04-16T10:33:08.557Z] command status: addNode, status: INTERVIEW_WAKEUP
    [2017-04-16T10:33:08.558Z] Node[26]: sendData to COMMAND_CLASS_WAKE_UP, params 0x0909
    [2017-04-16T10:33:08.559Z] Command start: sendData
    [2017-04-16T10:33:08.565Z] ProcessSendData[631]: To node: 26 with data: 0x840909 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.593Z] Command end: sendData
    [2017-04-16T10:33:08.615Z] Node[26]: Received application command for COMMAND_CLASS_WAKE_UP, data: 0x0a000258093a80000e100000c8
    [2017-04-16T10:33:08.619Z] Node[26]: sendData to COMMAND_CLASS_WAKE_UP, params 0x0505
    [2017-04-16T10:33:08.620Z] Command start: sendData
    [2017-04-16T10:33:08.626Z] ProcessSendData[632]: To node: 26 with data: 0x840505 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.713Z] Command end: sendData
    [2017-04-16T10:33:08.735Z] Node[26]: Received application command for COMMAND_CLASS_WAKE_UP, data: 0x06000e10ff
    [2017-04-16T10:33:08.738Z] command status: addNode, status: INTERVIEW_ASSOCIATION
    [2017-04-16T10:33:08.739Z] Node[26]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x05
    [2017-04-16T10:33:08.740Z] Command start: sendData
    [2017-04-16T10:33:08.745Z] ProcessSendData[633]: To node: 26 with data: 0x8505 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.774Z] Command end: sendData
    [2017-04-16T10:33:08.795Z] Node[26]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x0601
    [2017-04-16T10:33:08.808Z] Node[26]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x0201
    [2017-04-16T10:33:08.809Z] Command start: sendData
    [2017-04-16T10:33:08.815Z] ProcessSendData[634]: To node: 26 with data: 0x850201 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.845Z] Command end: sendData
    [2017-04-16T10:33:08.869Z] Node[26]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x03010500
    [2017-04-16T10:33:08.874Z] Node[26]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x010101
    [2017-04-16T10:33:08.876Z] Command start: sendData
    [2017-04-16T10:33:08.889Z] ProcessSendData[635]: To node: 26 with data: 0x85010101 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:08.941Z] Command end: sendData
    [2017-04-16T10:33:09.145Z] Command end: addNode
    [2017-04-16T10:33:09.210Z] Node[26]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x010301
    [2017-04-16T10:33:09.210Z] Command start: sendData
    [2017-04-16T10:33:09.219Z] ProcessSendData[636]: To node: 26 with data: 0x85010301 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:09.253Z] Command end: sendData
    [2017-04-16T10:33:09.260Z] Node[26]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x040101
    [2017-04-16T10:33:09.261Z] Command start: sendData
    [2017-04-16T10:33:09.265Z] ProcessSendData[637]: To node: 26 with data: 0x85040101 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:09.309Z] Command end: sendData
    [2017-04-16T10:33:11.852Z] Node[26]: sendData to COMMAND_CLASS_SENSOR_BINARY, params 0x02
    [2017-04-16T10:33:11.853Z] Command start: sendData
    [2017-04-16T10:33:11.877Z] ProcessSendData[638]: To node: 26 with data: 0x3002 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:11.958Z] Command end: sendData
    [2017-04-16T10:33:11.976Z] Node[26]: Received application command for COMMAND_CLASS_SENSOR_BINARY, data: 0x0300
    [2017-04-16T10:33:11.983Z] Node[26]: sendData to COMMAND_CLASS_BATTERY, params 0x02
    [2017-04-16T10:33:11.984Z] Command start: sendData
    [2017-04-16T10:33:11.992Z] ProcessSendData[639]: To node: 26 with data: 0x8002 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-04-16T10:33:12.202Z] Command end: sendData
    [2017-04-16T10:33:12.276Z] Node[26]: Received application command for COMMAND_CLASS_BATTERY, data: 0x0364
    [2017-04-16T10:33:18.976Z] Node[26]: Marked as offline

  • bvbbvb Member

    OK, I found the issue... when adding the sensor, there was no "association", after writing a 1 in the field and wake up the sensor, it was reporting the Status.

    Thanks for the app 

  • Priknr1Priknr1 Member
    @bvb
    I will change the code, so that on install, homey is included  in these association groups automatically.
Sign In or Register to comment.