This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
[APP] Z-Wave POPP Devices support for Homey
Driver App is being writen for POPP Outdoor Solar Siren
Not published and well tested yet. Aka work in progress.
Forum topic made to let everybody know its comming and no duplicate projects get created
https://github.com/mruiter/com.popp
Feel free to test, i have to charge my siren first before i can test
Not published and well tested yet. Aka work in progress.
Forum topic made to let everybody know its comming and no duplicate projects get created
https://github.com/mruiter/com.popp
Feel free to test, i have to charge my siren first before i can test
Comments
Hope your App will also help Controlling my smoke/Sirene-Sensor.
Tested the app quickly this morning before going to the office but i can (sometimes) trigger the siren.
As you notice, the sometimes is the problem
This weekend i'm off for a weekend Holiday so i dont expect the app to work before next week.
And i turned off the siren so that i dont trigger it by mistake and its blowing its whistle al day when nobodys home.
Neighbours would not like me anymore when that would happen.
Don't hold it down while turning it on or try holding it down after a few seconds.
I Just updated the app to also support the Z-Wave Striker Contol
I Dont have it myself and documentation at PoPP is poor as always.
Is there someone who could test is for me ? Its on the github in master
Drivers have been added , take a look at my github for the latest.
Let me know which ones you miss.
I'm trying to include my Popp Weather, but there is no app available for this device although 1.1.2 is installed.
Node info:
Any chance that this can be fixed?
Edit:
ok, downloaded from Github, changed the manufacturerID, uploaded bij CLI and now it is recognized. However no updates on the parameters, maybe it needs some more time.
When I pair it with homey (Unknown device), will it work in the flow editor?
So when Unknown device is turned on, then turn of the fibre plug which feeds my central heater?
Manufacturer ID : 340
ProductType: 256
ProductID: 1024
Popp mostly uses 340 so i wonder why yours is having 277 ?
I will see if i can update is soon to also accept 277
It is also not possible to save the changed parameters under the settings:
As you can see, the save button is greyed out (in this screenshot I changed the Treshold, so the button should be available).
I need some more info with the debug output from the console to see why values dont get show.
Guess it needs some more driver tweaks cause this driver was cooked up just by reading a text manual of Popp saying it supports lux dewpoint etc etc. No extra info other then a nice sales pitch is given by PoPP
As they Always do
If there is any way I can help you more you can sent me a PM.
Thanks for your effort.
In the Z-wave.Me app there is a 4 button wall controller with Manufacturer 340. I figured since it is exactly the same as the WALLC-S from Zwave.Me that POPP was part of Zwave.Me now.
(since the same happened to Duwi)
But I guess to keep things in the right place, I should delete it from the Zwave.Me app and add it to the POPP app?
Let me know when your first version is finished and ready to commit to Athom. I will add the wall controller than.
I think this is what you requested:
still waiting, I want to use the power-measurement function, can you fix this?
Tried restarting Homey, and restarting the app without any luck however.
On another note: I was testing a while ago, since I was wondering about the effectiveness of the smokedetector.
At that point the smokedetector was relaying Z-wave traffic normally, and after blowing smoke into it the alarm blared(that part works as intended).
However.....Homey did not notice anything and remained silent, I have several alerts configured which should go off, so I'm afraid something is missing here as well driver-implementation wise.
I dont have the smoke detector so i cant test. Its all based on guessing and the manual.
Please run the app in debug mode on the driver and send me in the reports that show up there when you blow in smoke to trigger so i can troubleshoot.
But after adding via the App i get an error that no known app can't be found for this device.
I've added the node information after it has been added as default zwave device.
It's possible to see if there is something different with this device ? Thanks in advance
I updated the version on github to match youre keyfob id's.
Could you please test if these work now ?
You can grab the new app from Github f, i just uploaded it there
Thanks works now with the version on github.
edit
found a little bug.
In a flow it's possible to make a IF when a button is pressed once and twice.
But this is only possible for button 1/2/4, the card for button 3 pressed twice is missing.
But its good to hear that the rest is working. i dont have the keyfob myself so its just guesswork