This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
superice
About
- Username
- superice
- Joined
- Visits
- 114
- Last Active
- Roles
- Member
Comments
-
Fire69 said: Just figured out that push messages are not included in the new beta. Hope those come back soon Yeah, those are second on my list, should be rolled out soon. But it is useful to obtain feedback on the devices and media pa…
-
btwvince said: Phuturist said: The issue with the latest beta not showing devices is actually an issue that it won't switch zone. It keeps showing the devices from the home zone even after switching to another. @superice Any i…
-
HansieNL said: @superice: Is disabling voice recognition not possible anymore in the new Beta version? Not yet. The settings page is not done yet, but it will be possible again in the near future.
-
LaurensOuwerkerk said: HansieNL said: Just installed 2.0 beta 1 B35, but doesn't see any devices? Same issue here, only on the first zone loaded a device is shown. When browsing to an other zone the devices are not displayed …
-
JanH said: Today I updated the Android app to v1.1.6. both at my phone and my Samsung Tab2. After that both devices say "sorry, this Homey is not connected". Before the update (so till this morning) the app was OK. What can be the reason? …
-
Weezul said: Is there a feature request page somewhere? I would like to be able to trigger a (or any) flow using the android app. this would be especially useful in the short term, while Voice Recognition on Homey is not usable, but also handy…
-
larsmachiels said: Tried that and it works. Great. Thanks for the tip. I noticed that Homey is more sensible for IR signals when you point to the "front" of the sphere. I thought it was 360 degrees sensible. Or maybe I was just in the wrong pos…
-
I just pushed version 2.0-beta.1 (build 35) to the beta channel! Within a few hours, the app should update automatically (although that normally only happens when the phone is charging, so you might want to update manually) There are still some fea…
-
cautje said: Hi, how about puch. Is it working ? I dont get one. THX! Yes and no. It is not working in the beta version yet, but once the app will be released to the stable channel, it will contain a rewritten version. I have rewritten b…
-
RobinVanKekem said: If you have different devices in different rooms you have to click a lot in the app. Is there a favorite list somewhere? If no => feature request RobinVanKekem said: If you have different devices in differe…
-
I'm actively working on this. All the native components are done (you have @JeroenVollenbrock to thank for that), and most of the JavaScript 'glue' (using React Native) is done as well. I'm still building some minor improvements, as well as putting …
-
RobinVanKekem said: superice said: Personally I'm fan of Atom with a ton of plugins (linter-eslint, minimap, project-viewer, pigments) and the themes Atom Material and Atom Material Numix for syntax highlighting. It's very extensible, …
-
Personally I'm fan of Atom with a ton of plugins (linter-eslint, minimap, project-viewer, pigments) and the themes Atom Material and Atom Material Numix for syntax highlighting. It's very extensible, and has all the features I'd expect from an IDE /…
-
DaneeDeKruyff said: Well, I just tried, when you want to add a device and choose infrared you are given two options: Automatic (Homey willtry to recognize the buttons you press) and Manual (Homey will copy the signals of buttons on your remote)…
-
MarcoWijk said: ?? Before i update form .27 to .29. How come it's .29 while the only thing fixed is the Wifi recovery? It jumps by 2 versions though there seem to be no major changes, as was stated in the previous updates ?? The number w…
-
No worries! Due to a tiny mistake in 0.8.24 receiving of IR is broken, which should be fixed in the next release After that IR should work pretty good (although IR remains hard because there are hardly any standards, or proper protocols, or even do…
-
jorden said: @superice will it also be possible to pick a 'default' zone to startup in? The top zone is empty with the way I set it up (per room: Hall, livingroom, bedroom, bathroom, etc). Would be nice to be able to select the 'Livingroom' as …
-
TarikFaik said: @superice I hope very soon hahaha I'm not sure when yet, because this was a much bigger update than just some bugfixes, but I'm on it pretty much full time, so no worries, it'll be here soon
-
Hmm, very odd. I won't tell you too much right now, but there are some big improvements incoming, in which this issue is probably fixed as well
-
Fire69 said: Android 4.4 is required. Since your device is too old and not supported, it's normal you don't see it in the Play Store. Nope, actually 4.2 is required. But the higher the better because backwards compatibility is a pain in …
-
JBenjamins said: Is the Android app supposed to be able to install onto a tablet? Since I don't own an Android phone, but I do own an Android tablet. If try to install the app through the link provided in page 1 of this thread (cannot find it …
-
@Phuturist nice write-up! My compliments on the clear explanation
-
Freek said: I'm getting a notification when I'm home/when the Homey app (I think) detects when I'm home. Sometimes I don't get anything, sometimes I get the notification multiple times in an hour. Is there anything to tweak to the accuracy? …
-
Fire69 said: I did see this on my tablet (Android 4.4.2): *snip* Don't know if it's related to the graphics problems of the wave? Nope, that's another problem. I've already proposed a fix. On old Android versions ( < 5.0 ) the andro…
-
Fire69 said: And it looks really nice... on my wife's phone! Yeah I only need to get it to work on every phone...
-
batteries4ever said: Actually, it might be nice to mimic the homey ring in the app, using the same colours. that gives a stronger link between talking to homey and talking to the app. That is exactly what the wave is for. Rainbow colors…
-
MarcoF said: @superice clearly didn't wrote the last Kickstarter update What do you mean? I'm just saying that a number of open issues by itself doesn't say that much; the importance and 'size' of the issues is a big factor as well
-
Emile said: MarcoF said: Emile said: You couldn't be more right We continue shipment when most bugs are fixed! The Kickstarter update of 21-2-2016: current status of Git issues; Shipping is in far, far away land! …
-
Fire69 said: Yes, just tested it myself and it is working on my S6 Edge and Note 10.1 tablet! But as said, not seeing what's happening is sometimes confusing. Did it not trigger, did it not understand, ...? Maybe just change it from a wa…
-
Fire69 said: So is it only the wave that's invisible? The recognition should work without the wave being shown? Strictly speaking, yes, although I haven't had the time yet to verify this. The phone I've tested did open the microphone an…