This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
rtna
About
- Username
- rtna
- Joined
- Visits
- 1,275
- Last Active
- Roles
- Member
Comments
-
@underground: I do not agree. @jorden does report a problem which he apparently relates to the mentioned specifications, namely memory and swap. If someone else, based on the same specifications, does not have that problem, it's always useful to rep…
-
System 332Mb, Swap 430Mb, Homey 134Mb and 42 apps installed. No problems at all with speed and stable as never before.
-
Ik heb een WS1080 (verschillende merken hebben hetzelfde typenummer). Deze is aangesloten op een Raspberry PI en de software daarop houdt de website up to date en stuurt ook data naar WU
-
Via Weather Underground kun je in principe alle weerstations uitlezen. Het idee is dat je weerstation (ook al is deze niet compatible met Homey) rapporteert aan WU en je dan via de WU app de data weer inleest in Homey. Werkt bij mij prima.
-
djesko said: Must say that 1.3.0 RC7 works great , fast zwave and good respons. I am also very satisfied with this update. Zwave is much faster and more reliable. No more zwave issues after reboot. Better flow management and overall …
-
I feels like a disclaimer, not a warning.
-
I have also a Cresta in my fridge. The fridge is <5 meters away from the homey but reception of the signal is very bad.I guess the transmitter is not that strong.
-
@RamonBaas This one was from a 433Mhz sensor.
-
@RamonBaas Is this the code you need? * [Array(47), Array(40), Array(33)] * 0:Array(47) * 0:71 * 1:10 * 2:2113 * 3:89 * 4:49 * 5:48 * 6:77 * 7:68 * 8:29 * 9:205 * 10:101 * 11:101 * 12:22 * 13:22 * 14:54 * 15:174 * 16:21 * 17:55 * 18:23 * 19:12…
-
Done
-
Same issue again today. Zwave is not starting correctly after reboot. Filed report on Github. Does anyone else have these problems with Zwave?
-
Wake up interval is just the interval in seconds in wich a battery operated zwave device will report to the controller when not active. My zwave smoke alarm has an interval of 21600 seconds. Wheb the alarm is activated (or in your case motion is det…
-
@TedTolboom That solved the problem. Any idea what went wrong here?
-
Ok guys, thanks for so far. I'll come back to you after the reboot and after I'm cooled down ;-)
-
bvdbos said: Did you try powering off Homey (PTP: pull the plug) for 15 minutes? Yep, twice. No difference.
-
Mijn ervaring is dat je na een reboot regelmatig sommige apps opnieuw moet opstarten. In mijn geval werkt zwave altijd wel direct maar Hue en Milight moet ik altijd handmatig herstarten na een reboot.
-
@RamonBaas : I just did enter the command. Where should I be looking at?
-
@RamonBaas : I have a WH1080 in my garden with all the available sensors in it. Can't send you the sensors because they feed a life website and are on antenna a couple of meters above the ground ;-) Would be happy to give you the needed information…
-
-
@RamonBaas : Do I understand correctly that is is possible to implement other weathersensors also as long as you have a signal code?
-
caseda said: @rtna if it is the non zwave plus version you have 2 options, add homeys id ( 1 ) to association groep 1 or indeed re-pair For the zwave plus version it should fix itself on homey reboot, or wakeup of the device (3x press of the b…
-
Works fine here. I noticed that installing this 'official' version also removes the beta wich I installed through dev-tools.
-
HarmLutjeboer said: It should be fixt in update V1.4.3 https://apps.athom.com/app/com.fibaro I gonna test it soon. Should I add the smoke sensors again when the update is installed? I had installed two sensors before on the old …
-
Die oplossing is duurder dan de Homey zelf
-
dENNtoet said: I agree with the voice recognition being bad, that's why I purchased Alexa to do the voice handling for Homey. This works PERFECT. I am interrested in what you exactly achieved and how you did that.
-
The prefix pws: is needed but in my setup the app chooses the nearest city anyway and not my personal weather station.
-
@MarkSwift: In what format did you enter your station ID?
-
HarmLutjeboer said: I have the P2000 installed on my homey and made a flow that when there is a new message, I'll get a message on my iPhone. For some reason I'll get A LOT of messages today. Almost every minute the same message. I thought …
-
Quick update: Every minute a query to www.meethue.com. Should this be normal behaviour from the Hue app?
-
After 3,5 hours I see now 11.000 DNS requests on my LAN of wich are 7600 from my Homey. This is still 69% of all DNS requests. Most of the requests are now for beta.alarmeringdroid.nl wich has something to do with the P2000 app ( https://apps.athom.…