This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
quakerix
About
- Username
- quakerix
- Joined
- Visits
- 727
- Last Active
- Roles
- Member
Comments
-
bvdbos said: Have to go with @Rocodamelshe here, the flows he posted in https://forum.athom.com/discussion/comment/36884/#Comment_36884 seem the most logical. If power > 80 then set status to on If power < 10 then set status to off and …
-
TedTolboom said: quakerix said: lourens said: I donot have it in a frame because the switch is behind a curtain in the corner of my room. It is in a corner with a B&J frame so you can compare. I think it will not fit in an…
-
lourens said: I donot have it in a frame because the switch is behind a curtain in the corner of my room. It is in a corner with a B&J frame so you can compare. I think it will not fit in any frame because it is to big. Size is 8,5cm in a s…
-
I have three different flows as well. But the first one is not kicking off anymore. I have the same flows for my alarm, and that one is working.
-
glijie said: look at the app Numcatch to convert your text to numbers I will! Thanks for the tip.
-
bvdbos said: The Boolean-variable and countdown-timer are both called Washing Machine? You can't set a timer to a boolean... But I must be seeing it wrong... i guess i could rename them to make sure that Betterlogic is not mixing them u…
-
@Eternity, @lourens i'm very curious which frames you guys found that fit the touch switch. Please do share links and pictures. Very curious.
-
quakerix said: Hey guys, I created a feature request: https://github.com/athombv/nl.thermosmart/issues/11 I have now a flow for each degree, that can be done smarter right? @Emile said that i have to use the Logic flow to convert the t…
-
TedTolboom said: @quakerix I would check the Neo Z-wave topic I don't have on myself, but did test it to finalize the app / driver update. It's a nice switch and responded instantly. Using it in combination with a wall socket and finding the r…
-
Hey guys, I created a feature request: https://github.com/athombv/nl.thermosmart/issues/11 I have now a flow for each degree, that can be done smarter right?
-
rtna said: caseda said: @rtna if it is the non zwave plus version you have 2 options, add homeys id ( 1 ) to association groep 1 or indeed re-pair For the zwave plus version it should fix itself on homey reboot, or wakeup of the devic…
-
Double post...
-
Kritjuu said: After the update of rc10 again the 433 mhz range is very bad again. My doorbells are about 6 meters away and do not work anymore. With rc9 al worked very well. Bug again? I'm experiencing the same thing. For the first ti…
-
I created an issue: https://github.com/athombv/com.fibaro/issues/128
-
I have the same issue. I tested it. I put some smoke next to a sensor. No triggers executed in Homey. I do see information in Z-wave log. I think this is a huge issue, these smoke sensors are now expensive very stupid smoke sensors.
-
I didn't test yet, but this is a serious issue. Just spent 250 euro on 5 of these devices. If they are not connected. Its useless.
-
The range of my 433mhz has increased! In the past it couldn't reach more than a meter. But now its turning on lights in the garden. Omg. Happily surprised.
-
Yep, tool works fine for me.
-
Better Logic crashed a few times in 1.10. Anyone else has this issue? It says the developer has been notified. But i do not see any issue on the github.
-
Hey guys, I tried the speech recognition and I don't get a single flow working. If i look at my input page it is not showing anything i just said. Rarely something appears there, if it does. Its not what i have said. Any suggestions?
-
quakerix said: Hey guys, what's wrong with this flow? I would like to have the preset in a veriable. What's the difference between the preset label and the Text label? Ah i think the preset # is a number, 0 = at home, 1 = away, 2 = s…
-
Hey guys, what's wrong with this flow? I would like to have the preset in a veriable. What's the difference between the preset label and the Text label?
-
Hey guys, is it correct that when I change manually the temperature in the my.thermostat application (web or app) that Homey is not getting updated? It's not pulling every x minutes or its not getting a push from my.thermostart that a change occur…
-
Hi @aloft could you build support for the HAC01: * https://github.com/athombv/homey/issues/1219 * http://products.z-wavealliance.org/products/694 That would be awesome. Its a simple on-off wall sensor.
-
Fire69 said: quakerix said: I ordered the: https://www.e-domotica.com/nl/producten/signaleren/e-domotica-wandschakelaar-sensor#guides Just to see if i get it to work the same way you did. I would have ordered the Fibaro Dual Relay…
-
MrDutchfighter said: You can use this card to toggle the light. This means. When 'light button is pressed' --> 'toggle lamp'. This will always toggle it off when it's on and on when the light is off. And yes, 50 euros is quite expensive. Bu…
-
DaneeDeKruyff said: This: https://www.klikaanklikuit.nl/nl/awmt-003-ingebouwde-mini-zender.html is probably the easiest way, though not z-wave Thanks, i know that one. I'm currently trying to get rid of all my 433 stuff since its too uns…
-
MrDutchfighter said: Hi, you can use the Fibaro wall switch. With this you can still use your normal switches. I've been using the dimmers to control my lights via Homey based on motion and still to be able to control them via the wall switch. …
-
tim1990 said: I want de 433 MHz to work. Maybe we can pay someone. If everyone give's a few bugs i think there will be someone that will actually make it work! I would give 10 euro's for it to work. now my homewizard eats up the money only for…