This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
luccie_007
About
- Username
- luccie_007
- Joined
- Visits
- 750
- Last Active
- Roles
- Member
Comments
-
caseda said: @luccie_007 reset your device from homey's settings -> z-wave -> [ remove device ], or the manual reset way specified in the device's manual (it doesn't matter that it is not shown in homey (yet)) I know how it all sh…
-
Priknr1 said: @luccie_007 When it comes to functionality, and therefor driver, they will probably be the same. When it comes to the app, they have different ID's and are therefor recognized as different devices. But here comes the bad news..…
-
luccie_007 said: luccie_007 said: Update works for my dimmers Now the battery switch still is on the list. 054436 Anyone got that working? OR does any knwo how to add a device to homey as main controller. But also let the device acc…
-
Found that the FA21RF smoke detectors us the NEXA KD101 in many homeautomation suits (Homeseer/Domoticz) So looking into that i found the decoding of the signal is done by the hardware, so source is not available, (RFCOM3) But they only have 1 sig…
-
luccie_007 said: Update works for my dimmers Now the battery switch still is on the list. 054436 Anyone got that working? OR does any knwo how to add a device to homey as main controller. But also let the device accept external input from my…
-
Update works for my dimmers Now the battery switch still is on the list. 054436 Anyone got that working? OR does any knwo how to add a device to homey as main controller. But also let the device accept external input from my switch? I want the sw…
-
Anyone else get timeouts? d:\mezwave>athom project --install ? Select active Homey: Homey @ 192.168.1.150:80 1/3 - Archiving... 2/3 - Uploading to Homey @ 192.168.1.150:80... Error: connect ETIMEDOUT 192.168.1.150:80
-
DenW said: Hi, I just started tinkering with your Kodi app this week.. and after a lot of trial and error it works great, so thanks a lot! However, I do run into a little bit of a problem. I created flows on starting, stopping, pausing and res…
-
swttt said: @DaneeDeKruyff Your dashboard still isn't available on the web if you do so. But when you are port forwarding, it starts working since it doesn't tries to connect trough the local ip but trough the cloud. I will really think about…
-
Yeah its merged now hope they will update the app soon Thanks both of you!
-
mbalik79 said: @luccie_007 I think now it's working, I see a light The subets wheree the problem, Now it also works form the external link to save pages and stuff. My vpn server is in another IP range so had to fix that first Nop…
-
I may have found the problem. I was with VPN in my network, but could not acces the HOMEYIP:1337 due to wrong subnet config. So i accesed it through the above link, which works, but does not make it possible for the app to save pages and stuff. Now …
-
SailingDuck said: Sure you have your bearer token correct? Had the same issue where I was reading a little to fast and thought my Athom Cloud ID was the token. Before that I didn´t have any device in the list. Its taken form the link …
-
Works for me But cant add a device to a page, the dropdown box stays empty. I only have 1 switch added at the moment, and a Nest and a Denon receiver, but none of them appear. Is this due to the fact they might not be configured as on/off devices?…
-
ErwinVrieze said: Homey can "sense" a Hue light is switched on, and based on that, you can make a flow of it (eventualy on a limited time base) Okay, thats more clear. To bad i dont have a Hue light. Hope they make the IFTTT soon.
-
ErwinVrieze said: I use the Beddi alarm clock, which is connected with my phone (and has 3 smart buttons), to let Homey respond on the action I do on my alarm clock (which is an action I want after/the moment I'm getting up) so Ilet Homey resp…
-
mauriceb said: @Priknr1 Already did that and tried adding it. But Homey appears to end up in an endless loop of adding. Even the time-out of the learning period is ignored. I had the same when testing a few days ago, it does get added a…
-
swttt said: @luccie_007 The V3 needs all the pages and devices in it's config. (See the config.json in the app directory) Setup can't work and isn't working for the stand-alone version. I would recommend you use the app version and install tr…
-
HansieNL said: V3 is up and running on my webserver. Waiting for new capabilties. If I switch on a light that has been switched of by Hue motion sensor, the lamp is not switched to full brightness. How did you get it up and running? I've…
-
054436 Wall switch/dimmer (Plak schakelaar op batterijen) http://www.pepper1.net/zwavedb/device/321 Ik ga even checken of de id's overeenkomen. Google cache PDF: http://webcache.googleusercontent.com/search?q=cache:yUzPXI_1cyEJ:manuals.zwaveeurope…
-
How can i get in the code checker? I found on Git it should be in the devices add list. But i cannot find it. I want to find the code of some 433 sockets I have which do not seem to work with any of the apps.
-
YvesGeffens said: @tim1990 That's more or less the same trick I use to log a Countdown counter. Store it's value in something that can be logged. @luccie_007 I know it's not Athom's fault, I meant that Nest shouldn't dictate use. I had 3 Nes…
-
tim1990 said: Just use better logic to store a variable when temp changes. I did that to so I have the room temp in insights Can you share your flow? Because the Temp variable of the Nest is a String, which i can save to a String but t…
-
YvesGeffens said: So we download it by hand, every week. I'll make a flow in Homey to warn me each sunday :-) Just kidding, I don't have a Nest, but you get my point. I think NO company should be allowed to say what I can, or can NOT do with MY…
-
luccie_007 said: luccie_007 said: PBaan93 said: luccie_007 said: Anyone else lost the insight information since we had to reconnect the nest due to an update? My nest is not available in the insights viewer anymore …
-
luccie_007 said: PBaan93 said: luccie_007 said: Anyone else lost the insight information since we had to reconnect the nest due to an update? My nest is not available in the insights viewer anymore )Already tried disabling …
-
I also have 2 FA21RF, please Athom make them work @Annemarie , any news if this is on the roadmap?
-
PBaan93 said: luccie_007 said: Anyone else lost the insight information since we had to reconnect the nest due to an update? My nest is not available in the insights viewer anymore )Already tried disabling enabling the app, aswell a…
-
Anyone else lost the insight information since we had to reconnect the nest due to an update? My nest is not available in the insights viewer anymore )Already tried disabling enabling the app, aswell as removing the device and adding it)
-
If U still use it yourself, why not publish it again? If its not for Athom, then do it for the users