This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
jprgomet
About
- Username
- jprgomet
- Joined
- Visits
- 248
- Last Active
- Roles
- Member
Comments
-
I would like to make flows for shutters. This is what I have in mind. Living area (living room, and balcony). Open always. Close if away and rain. Close if sleep and temp is below 10. Close if away and temp is less then 10 or more than 20c. If more…
-
@danone very good I am now also leaning towards power + controller + strip .. gives you more choice .. you did not have problems with tiny wires on strips and connection? Aeotec is good strip but not supported by Homey app.
-
@danone .. which RGBW strip you have bought to use with this Fibaro contoller? I was watching this one also but I need a power brick, do you have any recommendation on that? Maybe I can buy Aeotec strip and use it with this controller? Aeotec strip …
-
thank you guys .. @Eternity "I have several usb powered Aeotec sensors 6's around my house and still find myself occasionally showering in the dark :-)" ))))) .. I started with the presumption (without thinking) that I will do all of the automatio…
-
ykarlse1 said: But, it’s working thumb up!
-
maybe you can make flow with time .. if time is (set minute or two in future) then open .. just to test does it work with time trigger .. maybe presence does not work ..
-
can you make a screenshot of that flow?
-
just found this topic .. I have Motion Sensor - FGMS-001 FW: 3.2 .. and sometimes I have looong motion detection that is not true, only triggered it once. When I look at sensor under devices motion alarm is on for a long time. Not always, just as yo…
-
moved .. https://forum.athom.com/discussion/3528/fibaro-motion-sensor-movement-icon-flashing-red-very-long-more-than-12-hours
-
motion sensor looking at the window .. very erratic changes in lux reading .. sunny weather .. I dont see any significant changes in available light .. it went beserk
-
@swttt thinkig about Alexa .. can I set variables with voice command .. like before bed I say “set wake up time at 7” .. and than use that variable to schedule heating and shutters for morning wake up scene?
-
Reading the online manual for the motion sensor. This setting "Time period after which the motion alarm will be canceled in the main controller and associated devices. Any motion detected during this period resets the timer." means that I can set it…
-
Woohoo .. 1st devices successfully connected, motion sensor, wall plug and the button. All work as expected. All good. They are all securely connected. Made a flow when I press the button to turn LIFX on/off, works with a delay of around 1 sec, but …
-
Bram said: Awesome topic! Good for sharing idea's and to get some inspiration:) Thank you .. I really hope so .. my plan is to follow everything I do in this discussion. The apartment is not finished yet, but it is almost ready. I also h…
-
@jorden thank you very much for sharing. Yes, you are right! I thought about those scenarios also, to automate it to the maximum would be impossible But I will start with what is fun, and makes me happy, later I will start to complicate things …
-
@KoenMartens .. thank you very much for sharing your ideas! Entrance Regarding entrance, we are four. Two kids in school, and wife and I. We don't have any fixed schedule, kids go to school (one week in the morning the other afternoon) at sports et…
-
Rex said: I would be a nice option to be able switch off a flow in a future version!! +1 e.g. let's say I have a physical button that when once pushed set state "away" (waits for 10 sec and then turns off the light and rolls down the sh…
-
Rocodamelshe said: For the Danfoss living connect valves u can get the Danfoss link CC. The link CC can create zones and will tell ur heating system to go on and give some heat to 1 particular zone. Point of interest: when all ur valves in the…
-
tnx .. I am aware that any kind of change up or down will trigger message .. this is just me learning .. we will move to the new apartment in a month .. and there I will have motorized window blinds that I will try to automate with fibaro roller shu…
-
tnx .. I have set it like that now .. wunderground temp change .. it works now .. I am new user .. few days .. so I need to grasp logic of flow .. its logical but then again ..
-
So I can not monitor a realtime status of "such" devices? For eg. I have to make some kind of flow that updates "myBLvariable" with temperature every 10 seconds .. and then in other flow I set trigger A variable changed? I guess I can use LIFX devi…
-
Rocodamelshe said: A variable changed should be the name of the variable, not a tag. you are fast .. #Temp (blue) is a tag, and brown Turned on (LIFX) is also a tag or a variable?
-
tnx .. I think I will go with fibaro relay shutter. I also think that that would not be much difference, it's better but it's not worth the wait.
-
@JPe .. I dont have any .. I want to buy z-wave plus shutter module .. Fibaro does not have any shutter device that is z-wave plus .. I contacted Qubino .. they have z-wave plus roller shutter .. but at the moment they are working on new firmware fo…
-
@JPe all true but I was refering to roller/blinds controler .. fibaro does not have zwave plus version .. homey supports zwave plus .. but does not support any of plus shutter controler I have mentioned .. there is no app to pair them with homey ..
-
Hi, I am looking to buy I have ordered Homey today and would like to control my blinds with it (among other things). Fibaro is z-wave, and Qubino, Zipato, Philio are all z-wave plus, but none of them is supported with homey. Z-wave plus is better,…