This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
honey
About
- Username
- honey
- Joined
- Visits
- 471
- Last Active
- Roles
- Member
Comments
-
The T-Minus does not work for me either. @Erik_van_Schelven What changes have you made?
-
It would be useful for an Intercom app as well. Some intercom actually uses SIP/Voip.
-
Or just make Edge work, Microsoft...
-
Candy app for reboot flow card Better logic for virtual device Link the two And reboot it from the mobile app using the the virtual device.
-
Don`t want to make this a battlefield of Athom fanatics and complainers. But the voice is recognition issue is a year old and there were no steps taken to fix it. Yes z-wave is improving but not the range. When talking about the range than it means …
-
I believe the blog articles extremely valuable. They answer many in depth technical questions that (would) arise on the forum. Regarding the no reaction part, you are right. They don`t even touch the serious issues (like voice recognition, zwave ra…
-
I would be interested in a generic DLNA app. That would be able to support wide range of products.
-
I would be very much interested in DLNA app as well. I would also happily donate such a project. My needs are a bit more more basic: sending standard DLNA commands to my player (play, stop, pause, volume, source, standby)
-
I have illumination report from the NEO just the night mode does not work (yet).
-
The other thing that the illumination dependent `night mode` does not work on the NEO sensor. That is why I have the time window in Homey.
-
The Kitchen is on the same floor as Homey. In fact the distance between my Homey and the RGBW controller is 3.5 meters. Also as mentioned earlier if I turn it on/off via the app it reacts instantly. But your scenario is also interesting/weird.
-
There is no delay between the IF and THAN column. If I have this: Than the LighwaveRF turns on immediately but the Fibaro still has a 4 sec lag. 4 sec is very long. I have installed many different home and building automation systems and never exp…
-
Yes. Z-wave » 433MHz instant Z-wave » Wifi/Zigbee instant Z-wave » Z-wave 3-4 sec delay. That does not make much sense
-
No. It is a white LED tape and I use the White channel only. So I use only the on/off cards. (* The time between card has no influence on this issue)
-
It would be really handy to control homey via Xbox. At least it`s voice recognition works.
-
Take Google for example. We have no idea what they're working on. They could be changing the Google home page 10 times a day. We don't know. We are left completely and utterly in the dark on what Google is doing at the moment, how it affects us, wha…
-
According to the post they have opened enough to make reverse engineering obsolete. OZW is not the hardware so it does not matter what hardware is in Homey. Also there is an option to contact Sigma with reasonable requests. It is their interest to m…
-
Z-wave is very unreliable on 1.0.3. Often the motion alarms are not cancelled or triggered. Also having an issue with sending the settings to Z-wave devices.
-
Yes it does make a difference. The lower the resistance the stronger the signal is. That is also one of the reasons why it is made of copper.
-
In my case a Fibaro sensor went bad. It has such rubbish bracket that it felt out when slammed the door. Since it is broken it can`t be returned (I am not alone with this). Add that to the bill.
-
I was on 1.0.1 when I had the issue. So now I have updated to 1.0.2 and restarted homey couple of times. Still no luck but now I lost the the illumination report as well. I have also reseted the sensors. I tried with both `wake up` the official one …
-
It is pretty obvious that I have to wake up the sensor. I got fibaro sensors too so the process is familiar. And as I mentioned above I get the feedback that the settings has been saved.
-
I have only one issue. I adjust the settings (like alarm cancelation time, red LED). No matter if i do it via the setting or raw data. Even if it says the settings has been saved, there is no change everything stays default. Has anyone experienced t…
-
I got the motion sensors. It works well so far. Plus: * Good build quality, does not have a Chinese feel * Very sensitive * The range is significantly better than the Fibaro ZW+ * The bracket holds the sensor firmly unlike the Fibaro * Good pric…
-
According to the reviews it works with RPI and Domoticz. Lets see.
-
Wow! Seeing today`s transaction history of the motion sensor 80% of the orders are from the NL. Popular post.
-
Oh man! If you don`t hoover over that button it is so light grey that it is practically invisible. It would be handy to have a card option where you could drop a token with HEX value.
-
I have the same issue. I can`t set pure Red as you can`t the colour space is too rough. The hex input would be handy for other reasons as well. Do you want to suggest it on github?
-
Yeah we can see that dutch works. English please.
-
While homey speaks can`t listen meaning such a voice feedback would delay the time before you could retry. Probably a short ping or some audio effect would be more suitable.