This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
ericjanvanputten
About
- Username
- ericjanvanputten
- Joined
- Visits
- 600
- Last Active
- Roles
- Member
Comments
-
so for a noob - we hope that .33 will bring: - option to get more frequent updates from sensor (more then 1 an hour)? - more carts and options? right?
-
I could recommend this one: www.banggood.com/Original-Xiaomi-Xiaoyi-Ants-Night-Vision-720P-Smart-Wireless-Webcam-Security-IP-Camera-p-983655.html wifi, 720p, sd card, app, with modified firmware rtsp output, good quality video!
-
TedTolboom said: @DaneeDeKruyff ; Can you try to set is at a value of e.g. 10? Which most likely corresponds to an update interval of 42 minutes (2550 seconds) happy to give it a go if we can make the data come in more often then once an…
-
posthok said: Can't get this flow to work. lol yes please
-
well between 1600-1700 worked and a bit before it didnt as expected so seems to be the trick for same day... will configure it now with 2 flows and try tonight
-
the HTTP GET card seems to work (also another flow with that same trigger) but I think its the time that is the challenge. I will check that times on the same day this afternoon when i'm home.
-
ericjanvanputten said: MatjaLipu said: I don't know how iOS works and if it's possible to use wifi to test device presence. Homey bluetooth support would here open new possibilities. I'll add new provider which you can notify your dev…
-
Well im thinking of using the motion with a lux value for the hallway at home. so the moment i walk downstairs (living is on 1st floor) towards the halway i think it would be good the lux measure is not older then say 15 minutes? this so it can deci…
-
Cool got from the friend that it is def. going in the right direction! great thanks @BasVanDenBosch! So... one other thing we struggled with is the speed of which the sensor data gets updated. it now seems that it takes an hour for the non-motion v…
-
BasVanDenBosch said: Create a variable "lichtint". Whenever lux changes, store the value in lichtint: Then test for motion with a lux less then 100: holy crap - cool i will ask my friend to try! thanks!
-
BasVanDenBosch said: Just read the lux-value to a variable every minute and test the variable? so how can we get the lux variable into the 'and' logic app part? As the trigger (when) would NOT be the lux change, it would/should be motio…
-
So just ordered one from amazone.de and now at a friend with a Homey and this sensor and we are baffled (and hoping to be wrong ) that we cannot use the lux value as the 'and' value making a very 'common' and useful flow like: WHEN motion sensored …
-
okay that was indeed relatively simple. after installing node.js and download the github stuff and unzip it to an to find location and then its basically the following: special thanks to HansieNL to help and explain it to this noob
-
HansieNL said: ericjanvanputten said: could you share that file Check Node.js version on Homey: Settings - System - Show Stuff for geeks - node_version Install Node.js: Download Node.js from the Node.js website (https://n…
-
HansieNL said: RobinVanKekem said: --run is for debugging the app and will most likely uninstall when the session is disconnected. Use --install if you want to install I used --install and everything works o.k. again. Thx for al…
-
HansieNL said: ErikVanDongen said: HansieNL said: Thx, but I can't get it working. I hope someone from Athom comes up with a solution so we can Incomming GET requests again. Version 1.1.0 is now pending Athom's approval…
-
MatjaLipu said: I don't know how iOS works and if it's possible to use wifi to test device presence. Homey bluetooth support would here open new possibilities. I'll add new provider which you can notify your device is present. Then in Tasker (…
-
Interested in this technology as well, i have one of these -> http://www.banggood.com/IBeacon-Ebeoo-Bluetooth-4_0-BLE-Module-Station-Indoor-Positioning-USB-Device-p-997064.html No idea how to use it yet
-
Starting to think that in combination with an iphone that the arpscan or potentially even tcp/ping whatever might not be the best option to have homey know if im home or not. Thinking that geofencing app with webhook might be a better (more stable…
-
MatjaLipu said: ericjanvanputten said: however, with an iphone 6 running 9.3.1 (up to date) it doesnt work well -yet-. Basically every x minutes when the phone is on, but locked / asleep i get homey/presence app to find it, lose it, fi…
-
Well the cool thing is, it seems to work right now however, with an iphone 6 running 9.3.1 (up to date) it doesnt work well -yet-. Basically every x minutes when the phone is on, but locked / asleep i get homey/presence app to find it, lose it, f…
-
MatjaLipu said: remove the trailing / f*ck me... duh.... Thank you! I get devices etc now...
-
MatjaLipu said: can you elaborate on "not found in homey"? what url, network tab screenshot. I get the following just after selecting the app in settings, if i hit any other tab like status/providers/settings or hit save it disappears. …
-
Okay installed it on a pi 1 borrowed from a friend as a temp and got this far: - installed raspbian - installed the presence stuff on pi - updated allowedorigins - get info from web url - installed app on homey - added url to app in homey - does…
-
ericjanvanputten said: Just tried the same as earlier in this /other thread, but it seems it fails on my kodi/raspbian ComputerName : 192.168.1.6 RemoteAddress : 192.168.1.6 RemotePort : 9090 InterfaceAlias …
-
Just tried the same as earlier in this /other thread, but it seems it fails on my kodi/raspbian ComputerName : 192.168.1.6 RemoteAddress : 192.168.1.6 RemotePort : 9090 InterfaceAlias : Wi-Fi SourceAddress…
-
Im now getting a mix (after probably succesful installation) of error 200 and econnrefuse messages after setting up kodi on homey with a name, IP and port.
-
Phuturist said: wingie said: I've just received my homey and the setup worked fine (after i switched from safari to chrome, was to happy that i had forgotten to switch browser). Installed the kaku app and after that tried the kodi app …
-
Bumblez said: It's also a matter of managing your legal rights. According to Dutch law, you have the right to cancel your pre-order within 14 days after receiving your goods (no matter how long ago you placed that pre-order). If you decide to a…
-
tunf said: Beside what @Bumblez mentioned i would also like to give feedback. I ordered by creditcard. This way i'm protected to receive the goods and if it is stolen i'm insured for 6 months. Good thing i thought. In contact today i was told …