This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
danone
About
- Username
- danone
- Joined
- Visits
- 360
- Last Active
- Roles
- Member
Comments
-
An update for the above. It looks like after restarting Homey the Door/Window sensors work. I can use them in the flows. However, under the devices the door/window sensors still show up as per the above screenshot. So I cannot see their status and …
-
TedTolboom said: Time for an update: The Hank app (first SDK2 and meshdriver based Z-wave app) has been released to the app store. In the meantime, I've also converted the Remotec app to SDK2/meshdriver based and tested it at home. This SDK2 …
-
Your settings look OK and all my dimmer 2 settings are the same, except of the Maximum Brightness Level of course. I presume that you have a transformer connected as well since the dimmer 2 only works with 220-240V loads and I see your lamp is 12V.…
-
B3rt said: You can use your synology for camera and recording and let Homey start/stop them. Z-wave is support, so if your devices are already connected (and reqonized) it should be very easy to create the flows. and it is rather fun to bui…
-
RuudvB said: ingmar said: Hi, great update but since I am on 1.5.1. I have huge delays with flows being executed. Walking into a room with a fibaro (or aeotec) motion sensor normally switches light on instantly, now it takes about 10-2…
-
fspaan said: However, the microphone card says 'attention! Conflicts with other speech command'. How can I find the other (which I did not built) and if it is an pre-programmed one, how can I control that one to direct to my own build flows? …
-
Same with an Aeotec Switch 6 which controls my coffee machine, Homey yelled in the middle of the night "coffee is ready, enjoy it" And one of the Fibaro Door sensors which turns on the garage light. So the garage light was on this morning. I had the…
-
honey said: No the colour card is not an option. For white it uses the 3 channels (Re, Green, Blue) instead of the White channel. Check in the settings if you have selected the LED strip type as "Red, Green, Blue and White" Else, it will…
-
TedTolboom said: This is the exact advice I gave in multiple topics... only change: I use a powerbank connected to Homey... no cables! Oh, man! Hate to say this but sometimes my wife is right. I am full with ideas but none of the …
-
bvdbos said: It is compatible, are you from Australia? Could you post the info from the device, maybe the device-id has to be added to Homey? That had to be done for Fibaro-stuff too: https://forum.athom.com/discussion/3480/australian-frequency…
-
A z-wave device. Like an Aeotec Smart switch 6 or energy meter or if you can wire it yourself then a Fibaro single or double switch 2 which reports the power consumption. They all are smart and Homey compatible. Maybe not cheap. My two cents ideas.
-
JPe said: @mixuk try to remove the device in: Settings / Z-Wave / Remove a device He said in the first post that he tried that. I am having lots of such problems, and I mean lots! It hangs in different stages when i try including vari…
-
bvdbos said: The latest commit deleted some duplicate devices. As for the tamper-alarm, could you (preferably in Github) make an issue for this noting the device-type and product-id's? Makes searching easier... https://github.com/athombv/com.fi…
-
@caseda After the last Fibaro app update I can include now my new (old) door/window sensor z-wave plus. However the tamper alarm does not stop. The sensor is brand new, no broken lip, both inside and bottom switch work fine. When included in Fibaro …
-
caseda said: I see what has gone wrong, and I'll see if I can make some time to fix it quickly today Thank you and I am sorry to be so obstinate. Just excited to get all my devices right and dive into programming my Homey.
-
Maybe this helps you guys: - I am including my door/window sensor as the "Door/Window Sensor (z-wave plus)" selection among the other two options which are "Door/Window Sensor" and "Door/Window Sensor 2" . The sensor pairs nicely and then I get the…
-
Bram said: @danone I just got conformation that with v1.5.6 your issue will be resolved! @Bram and @caseda the update came in and after I include the Fibaro Door/Window sensor it does not come anymore as basic device. So good news. Howev…
-
bvdbos said: I've reminded @Bram about this... Thanks!
-
I know Athom is busy getting the 1.5.0 working. But it would be nice to have this Fibaro app accepted soon as possible. Hello Athom guys? I don't want to sound like a fly buzzing. Thank you in advance for having this done.
-
LJSVV said: caseda said: you can try the aeotec nano dimmer (which is the newest dimmers out there) but is not supported by the app (yet) am creating a driver for it, but want to buy it myself first since it has some awesome functiona…
-
underground said: So, in short: First I had to remove all Z-wave devices one by one. And then I had to add them again, one by one. As @TedTolboom explained this is very normal with Z-Wave and for me one of the reasons that I use Z-wav…
-
TedTolboom said: Time to start expanding the Remotec app.... Just received the Remotec ZXT-120 Z-wave to AC IR extender which is already available for a while, but also it's to be announced successor the Remote ZXT-600 AC master... Both de…
-
Hmmm it looks like the guys from Athom are indeed busy as there has not been an update of the Fibaro app, yet. Or maybe the summer is too good up there in Europe and everyone is at the beach. No complains, but I hope I can use soon my new (old) F…
-
caseda said: OK, i've updated all the devices now for their corresponding AU id's (and US id's while at it) and is awaiting acceptance from athom. Many thanks! I shall report back once this is approved and tested.
-
caseda said: So you have the old new one, door /window sensor 2 is already in Europe I'll check all other devices as well for the Aussie frequenties when I get back home Yeah, I know. In Australia everything arrives few years later af…
-
@caseda Sorry to disturb you again, I have just purchased a brand new Fibaro door/window sensor and unlike my old Fibaro door/window sensors, this one is Z-wave Plus. And guess, what? It pairs nicely but as an unknown device. Kindly I ask you to ha…
-
I can confirm that all my z-wave Fibaro and Aeotec devices paired nicely, recognised by Homey and work correctly after the latest updates. I could not be more pleased, time for some flows now! Really impressed with you guys as well as with the s…
-
@TedTolboom and @caseda Hello Gents, I've just arrived home and learned that both Fibaro and Aeotec app have been updated. Quickly I have tested the Fibaro button and double switch 2 and it works! Really pleased, I cannot wait to call all my friend…
-
That's super, I was worried that if I might purchase a different type I would have to go again through this process. Thanks @TedTolboom
-
EvertorN said: @danone Interesting.. How would this work? Like which products would I need to buy to get this setup working? It looks like the interface (the KLF100) can be also controlled from a voltage free relay. There would be few op…