This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
chrisboer
About
- Username
- chrisboer
- Joined
- Visits
- 177
- Last Active
- Roles
- Member
Comments
-
http://YOUR_IPCAM:PORT/cgi-bin/CGIProxy.fcgi?usr=USERNAME%26pwd%3DPASSWORD%26cmd%3DptzGotoPresetPoint%26name%3DPTZ_NAME
-
Already did this but I don't see the added value, it would be nice to make a video or send a snapshot but that option is not "webbased" possible with Foscam. I have added the code below YOUR_IPCAM = IP address of cam PORT = Port to connect to Us…
-
bob76 said: phb said: @bob76 Hi Bob you did everything you could do . now you have to wait for @MikeOne to repair his plex app what about the comments enjoy watching after the tutorial is there anyone that is using this with…
-
Tim_Brass said: Activating a flow is not the same as triggering a flow: When a flow is deactivated it can not get triggered. Activating a flow again just makes the flow available. The trigger still needs to fire..... The part for activat…
-
Question : when you participate in these releases can you at a certain point in time go back to "normal" releases ?
-
Can something like a rollback to a previous "APP" version also be created because automatic updates are nice but when something breaks up you would like to roll back the previous version.
-
Just wait untill it is possible within Homey, but my range is gone to FGS222 first about 20 meters now about 10 since last update
-
When will this be possible because I need to update my Fibaro devices and don't own a Home Center
-
Ok thanks Jorden, the app works likes sharm now
-
Thanks @Bumblez then we simply have to wait ;-)
-
IFTTT is totally non responsive to homey I had 2 tries with very basic things but still waiting on response from IFTTT
-
Thanks @caseda but you basically require a specific "trigger" to activate a flow, otherwise you can only use the "Generic" Trigger "Er werd iets gezegd" only one time because it will be applicable for all sentences you say. Would it not be easy to…
-
Question how do I remove the "trigger" word in the box when I add speech text as input. So I would like to use speech without -spotify See picture
-
Ok I will add my comments also here then. Installed PLEX on Homey could connect to it and PIN process all done, on my QNAS it works perfectly on 192.168.2.101 - PORT: 32400 - using SSL: NO - LOCAL: true -> keeps flashing green but no media is…
-
When will media player be implemented in Homey ?
-
Mmmmm maybe I am too much a geek that I think in product types instead of generic product names ;-)
-
No it is not Relay Switch is on my box. But there are 3 double relay switches and 3 relay switches in the overview. If you would change it to FGS-222 or FGS-221 or whatever you would directly know what item to pick and you don't have to check all of…
-
I did hover the name I don't see anything else then the Double Relay Switch 2 or any full name of the device. Where can I read the file/app description ? By the way I am on windows 10 which might be different than your system.
-
Da_JoJo said: does this nuki work with 3-point locks on the frontdoor ? it requires a bit of force to open it with the key when door is fully locked It works with a 3-point door lock on my side, also the electric drive motor should be …
-
caseda said: @chrisboer For the next time, hover your mouse over the name, it will show you the full module name (there is already a ... behind the name to indicate that it is shorter name) It's just the names Fibaro gave their devices, F…
-
Da_JoJo said: can use a range extender or another device with routing capability inbetween homey and garagedoor switch Do you have example products for a range extender ?
-
I already fixed this issue in a code change to Nuki it had to do with a timing issue. Updated the code on Github.com now it is up to Jorden to check the code.
-
djesko said: Just pick add zwave and the app will pick the right driver for you Thanks it works... I had to reset my switch before it got recognized. But it picked up the correct one indeed. I now have the next challenge ...…
-
Thanks for the quick reply but how do I put it in learn mode ? With the S1 I have to add a switch to toggle the learning mode... can I also put the brown wire in there ? I will use this switch not for lights but as a switch for a garage door, so I n…
-
I also have a FGS-222 but I don't get it to work either also I don't know what device to select because they are all called the same. I am now rebooting Homey try to see if that helps.
-
It seems the server can not be reached http://gadgets.buienradar.nl/ eventough I can access it from my laptop. So if I ask homey if it will going to rain it says : Sorry ik kan de buienradar server niet benaderen probeer het later nog eens.
-
jorden said: New version 0.1.2 is up for approval in the app store. New: - Triggers "Locked" / "Unlocked" now work! With a little help from BasKiers Hi Jorden I installed the app added the port and ip and token then the Nuki is found a…
-
All is done now I am on version 1.0.1 so I got the shiny rainbow. De aanhouder wint zeg maar. With MAC completed the flashing, with Ubuntu without any firewall reset the Homey and installed it completely. I can now finally start making flows and i…
-
Entered state 11 current progress: 100% Awaiting state: 12 Entered state 12 Awaiting state: 13 Entered state 13 Finished flashing: I have a steady purple ring n…
-
I am currently recovering on a MAC with a friend problem is what to do AFTER stage 13 is finished ?