This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@Tim_Brass Kaku has no feedback, so homey can't know in what state the Kaku is in until you turn it on/off There is a dedicated on and off command, so turning it on in homey wil keep the Kaku on, and "update" the status to correct.
-
Can someone Confirm my assumptions?: It looks like v3.2 has thrown around with the Association Groups compared to 2.5 - 2.8 (stated as 2.7 from now on): 3.2 Group 1 = 2.7 Group 3 3.2 Group 2 (Motion Z-Wave+) & 3 (Tamper Z-Wave+) are new b…
-
You can add another card in the "then" column where you put the "on" command, but with the "off" command and at a delay (right-top side of the card, the little clock)
-
@Fire69 I think it's a problem from within Homey, looks like they don't send those Parameters Correctly to the sensor which puts it in alarm mode, and thus triggering the constant alarm. And a full reset is needed of the Motion Detector. @Vagabond…
-
This should work for Versions 2.5 - 2.8 Make sure your to be added Motion Sensor is properly Reset, Even after you deleted it in homey: Hold B-Button until Yellow LED light turns on. Release and press once short, the LED will now turn Red (with sma…
-
@scocz Try this: Add a "1" (without quotes) to Group 3 in the settings, save it, then wakeup the motion sensor by triple clicking the B button quickly. now watch if the motion/alarm sensor goes off after 8 seconds (round and about). If not make su…
-
I noticed that the brightness of you LED ring is in link with the microphone. So LED ring @50% = Microphone volume @50%.
-
To make the text and icons of the sidebar smaller add this to the existing code: The draggable part is a bit offset above, will try to fix this when i find the time #items-wrap div.item { height: 49px; } #items-wrap div.label span.name { …
-
There is a quick work around for that, wich works good: https://forum.athom.com/discussion/comment/14332/
-
@Tim01 do you got the led ring brightness at 100%?
-
@Bumblez ;; Homey doesn't have a 5ghz chip onboard so that is why it can't find your 5ghz network. Maybe you need to turn off the 5 ghz in your router for the moment while connecting your homey, atleast that worked for me, and have seen it multiple …
-
By my knowledge the zwave devices only can be connected to 1 controller at a time. Unless you put one of the controllers in "Inclusion" mode.
-
The volume at the moment is configured "wrong" it is configured like 0 - 10 (0 = off, 10 = 100%) And not 0 - 100 This is a known issue
-
Status page now does mention the app store is in "maintenance" at the moment
-
Can't answer your first question because I don't have ziggo. Second question though. The harmony hub is just the hub to control your devices with your smartphone. The "ultimate", "elite" or "companion" versions of the hub have a remote control t…
-
On which firmware version are you trying this on? If it is .20 Or later it should work, have you tried to restart your homey?
-
Count me in for wanting one.!
-
Do you have the checkbox for experimental updates checked? . 20 is only experimental still. Note: for now, it is not possible to return to stable releases only. So make sure you don't mind all the experimental updates only
-
@thayoung1 Question one: Searching the forum found this about activating a scene: https://forum.athom.com/discussion/comment/11274/#Comment_11274 and the whole lot below. Question 2: This is not possible (yet) at the moment, at least not until the …
-
Until the Zigbee Light Link Protocol (API) is implemented (which will take a while, probably even a few months). Homey will just be a Remote for the Hue Hub nothing more, nothing less. Once the it is implemented it will be possible to see the Hue T…
-
Searching through the forum it's not too hard to get an answer to your question: They are still busy with "Low Level Audio": https://forum.athom.com/discussion/comment/8725/#Comment_8725 If this is done there should be an app for sonos pretty quic…