This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
Yes that is exactly what the options (should) do. It is not recommended to put the wake up interval under half an hour (1800 sec.) though. And I don't think the Polling does anything with battery devices because the sensor is asleep.
-
Frakke said: Nice, so 3 flows? - Turn on lamp - Start countdown - Turn off lamp Unfortunately, yes. It is the most reliable way i can think of, to have the light on when you are in the room at least. (i had it with 2 flows before as wel, an…
-
Well.. You could actually invert the [AND] conditions with the checkmarks: If it is not later then 7:00 and not earlier then 21:00
-
For best reliability, trigger the count down on the "off" state of the motion sensor. When triggering with the "on" state, it won't send another signal to reset the countdown if it sees motion between the default 8 en 30 seconds but stays on unti…
-
But if the led can rotate in both ways, shouldn't it be possible to make it go back and forth (aka knight rider) by changing the direction every 1 or 2 seconds? (it takes 4 seconds for a complete cycle) or would this ask too much of of homey
-
AND, you need to set the variable once, to either "grijs" or "groen" either with a new flow, or just click variable to "equal to" check mark so it becomes a "is not equal to" and test it once, and then change it back to "equal to"
-
If you want homey to talk, you will need to change the "Push Notification" with "Speak".
-
Troubleshoot: Don't use the words that are build into homey. I'm sorry but that really is the only way at the moment
-
@gerbenz is it this too hard to understand because it is in english? or is it just to hard to know that you can change the day from monday, to any day of the week, and the color (of the container) accordingly
-
If they have an open API or any of the wireless protocols Homey has (non encrypted) then it is plausible. As of this moment, no.
-
Long Answer: It can't be done with just one flow at the moment. But with two flows it is like this: And for the second flow change the "Equal to" to "grijs" and "Set to" to "groen" Or use the "iCalendar to Voice" app
-
[IF]Sunset Starts [THEN]Light, Brightness 10%, Delay 60 minutes (right hand corner) Not that hard
-
@JeroenVollenbrock Aah, that makes sense, that was indeed the case. I thank you very much
-
ok, this is a new bug to me i haven't seen on the forum yet at all. This is my settings page menu: And it is missing 2 options, the updates page, and the system page Anybody else ever seen this? it doesn't get fixed by een power cycle (can't rebo…
-
at the moment you could do it, with 7 flows: And change the "Dagnummer"/"Daynumber" To 2 / 3 / 4 / 5 / 6 & 7 Little bit cumbersome but i guess it works But i guess it wouldn't be too hard for athom to add another "First of the month" card
-
sigh, ok if you wanna stay in that mind set, by my guest. The Fibaro wall plug is working for me though, it measures the kw/h and can be triggered on and off. (so it is not, not working at all) that the option to make flows with the KW/h - W is not…
-
@MarcoF So you are gonna say that all devices from now on that are being made are Z-Wave+ ?
-
@gerbenz ;;; you will need to wait for about 5 seconds, after that you can turn it upside down to start the reset. Earlier you will enter a debug mode for firmware reinstall purpose and such.. for Athom only i guess.
-
@RamonBaas ; When the automatic portion works, you won't need to do anything about configuring the zwave device as wel, for now it's needed because the automation part is Not done yet. look back in about 2/3 years and see if the other controllers o…
-
you can still use the dimmer with the hue bridge, i am atleast. so it doesn't do anything when you add the hue as a device and then asks you to push the button? are you on the same network? (homey and hue)
-
@Chris101 ;; you can't add the switch separately to homey (yet), not until the "zigbee light link"protocol is implemented.
-
Little update on the "true" message i got from chrome yesterday. Today i had it as wel (while being busy with some flow adding/changing) i had the same message again, except this time it was shortly after i tried to save a new flow, which caused it…
-
@robertbusscher you will have to have some patience, the 433 mhz chip sometimes just doesn't want to talk to homey, this can be resolved sometimes by restarting homey, sometimes bij power cycling the unit, but sometimes it needs multiple reboots or…
-
mvdkallen said: @Taco @Emile I did the upgrade to v0.8.32 this Wednesday, and ever since my Homey will freeze at least once a day. When it happens, also the LED Ring activity (Rainbow effect) is fully frozen. Does anyone else experience this…
-
Be careful, at the moment the sensor stays on for 30 seconds before turning off the alarm, it can not be changed yet because of a bug Or maybe you are moving the sensor around, the sensor has a tamper option that is on by default and triggers the s…
-
@btwvince If you are using the official push notification thingie. try to reinstall the app on your phone.
-
@AcE_Krystal ;;;;; so why don't you use the better variable app? then you can check for multiple variables (Boolean) to be true. like this: and this: Brightness 1 = 10%. (so you don't get blinded when movie night but need to pee ) Brightness 2 …
-
Homey has come pretty far with implementing Z-Wave, athom only uses a different way then most controller manufacturers, that is way more future proof. Most other controller manufacturers use large libraries of information for each individual thing …