This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
Ik denk niet dat het hardware matig is, er gaat wat fout bij het toepassen van de update. Dit nog goed te verhelpen. Neem gewoon contact op met support@athom.com. I don't think it is hardware related, more like an update not being installed prope…
-
1 = beginnend met 1 led en dan langzaam breder (1% naar 100%), die dan rond gaat. Dit is updaten. 2 = ademend, breed naar niet breed (1 led) en weer naar breed (alle leds) dat rond gaat. Dit is firmware herstel stand. Optie 1 = wachten tot updat…
-
Homey is probably updating. What kind of purple animation do you got? There are 2 different ones Homey is waarschijnlijk aan het updaten, wat van animatie geeft hij weer? Er zijn 2 verschillende
-
Let's just make this more clear. Most, if not all the video's they have made during the kickstarter time is Not the software that is now on homey. Back then there was no working software, everything they showed was glued together to just get a "wo…
-
It will take another flow, but it is very possible to put a variable from the better logic app to the default logic app. Just do something like: [IF] variable is changed (better logic one) [THEN] set variable: tag(value). The default app is alre…
-
@DaneeDeKruyff ; Yeah I've seen it before (on other controller forums) that the sensor needs to be put in binary instead of basic command set to get it working properly. You needed to put it in binary before with homey, before the command class "Sen…
-
Or put the kaku motion on 1 minute, and trigger on: Motion On = Light on Motion Off = Light off the internal timer of the kaku gets reset when motion was seen
-
The app is compatible for tablets? The cards do get a little bit big though, but it works.
-
Like this?
-
@Fire69 Did you have any Z-Wave Wall Plug(s) as a device? If so leave these ones out, they give a lot of trouble (atleast for me) at the moment.
-
@Jesper ; They are only send to the motion sensor after it has woken up, after you changed the parameters. So you need to wait until it reaches it's wake up time (default 7200 seconds/2 hours) or wake it up manually by trippel clicking the B-Button.
-
Was checking out any Z-Wave updates, there are new triggers now for the wall plugs, they now are able to trigger with power metering and wattage.! Note though: Do not turn off your wall plugs. Homey will not receive the change in kw/h and Wattage w…
-
@MarcoF i don't mean where you created them, but where they ended up after creation, above or below the flows you moved
-
@MarcoF were the flows you moved above or below the folder you moved them to (assuming you moved them to a folder here)
-
@0burner0 ; no how to is needed. There is a bug with either homey saving (even though @emile said it's not homey after 10 minutes debugging) or the app has an error with saving variables. either way, you can't make any new variables.
-
This is why you get 3 devices: 1st (the one without the Endpoint in the name) is the main device, and is needed to be able to send parameters to the dimmer with flows (and a few behind the scene reasons). 2nd (Endpoint 1) = Dimmer Relay 1 (a.k.a. S1…
-
@Franq I don't know for sure, you'll have to try. I don't have a dimmer (or any of the other scene-able devices) to test what it does. You could still try to add a scene trigger by dragging the [Z-Wave] under wireless to trigger and see if it folds…
-
@djesko my fibaro wall plug is still working a ok. so maybe a restart is to be needed.
-
on a positive note: the new update of the app makes the app have landscape mode!
-
I've made (before latest crash) various pretty big flows that use the HTTP app in combination with the hue api. Also a full room-sized homey (rainbow effect (colorloop) in the entire living room) to a small wake up light flow that wakes me up in the…
-
@Rocodamelshe ;;; If you look closely on the image you can see I clicked the box Its a small drop-down with no text in it. (when mouse over in the drop-down there are 2 different (empty) boxes to be exact) A reboot of homey didn't fix it as well
-
When looking at the trello page https://trello.com/b/aYBmd9Ru/athom-s-public-timeline-for-homey then i can conclude that at the moment the command class (Central Scene) has not yet implemented into the Z-Wave (public) code. And is pretty hard to imp…
-
Z-Wave = hard luckily i'm not the one creating the app, man that work. but i guess that means it works now? then @mranderson can do the same.
-
Have you woken up the sensor after the inclusion to homey at least once? (triple click the TMP button) otherwise you will have to wait for the first wakeup interval After that homey should receive the start and stop frames from the sensor (also: the…
-
I have tested it on 0.8.34, my results: The configuration works good, saves the api key and IP. But that's all i can do at the moment. When trying to add/activate scene i get an empty card menu: The key is right (works in api debug tool) IP is co…
-
that's a pretty quick response time from fibaro. but great my guessing was right Happy switching and dimming.
-
Variables are the same way, just take a look at the "better logic app" in the app store. It is given in a nice "list" way like you want it. The default logic (variables) will get an update pretty soon to be more viable/edible as well.
-
@DaneeDeKruyff ;; After reading the manual of a few Z-Wave+ devices the conclusion comes to, it should update the parameters on wakeup. (except for your multi sensor, there is no information in the manual about it). Might just not be implemented y…
-
@DaneeDeKruyff ;; Do you have your sensor included as "secure"? Maybe this is a secure feature/safety thing. Or it has to do with Z-Wave+ waking up differently. Could be tested by someone with a fibaro motion sensor v3.2 Edit: (I miss the strike…