This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@ericjanvanputten have you tried to power cycle homey yet? had a bug as well that solved itself by power cycle
-
@RogierVanWijk did you enable experimental updates? Because 0.9.1 is just for the experimental channel right now
-
@Reemster I think there will be a map kind of thing in the settings menu showing the mesh grid. But at the moment that has not been implemented yet. My guess is that it will take a while as well, pretty hard to implement the right way.
-
Wow, the restart (power cycle) is way faster now.! Love it Z-Wave Findings so far: when trying to pair any z-wave device it will give me this error in console: Blocked script execution in 'http://192.168.10.200/app/com.fibaro/drivers/FGMS-001/asset…
-
Homey FW: 0.8.39 KaKu app: 2.0.6 I can't seem to pair my APA2-2300R Sockets to homey (i can pair the included remote itself); And this is also with my ACD-300 which won't pair. Can't pair it with other types of sockets as well. So it seems like it's…
-
I've seen the app in the github since this afternoon, glanced over it and still lacks certain things, so a lot to do still before the fibaro app is done But it was the initial commit, so my hope is strong everything will turn alright.
-
But it does work when you trigger the doorbell with the button? (through homey of course) and just not with the test button?
-
At the moment it could never have worked with the "Contains" card (even before) with the test button. The test button uses a default preset value for tags hard coded in the trigger card, so it could only be luck that you choose text that was used i…
-
Bumble said: P.s.: Is there a list (PDF) available with all the build in speech triggers (like: what's the weather. set a timer enz) https://forum.athom.com/discussion/1158/built-in-homey-voice-command This does not contain any voice comman…
-
So a new update was there for kaku (2.0.6) maybe its fixed now? Too bad still can't test it myself right now
-
Then there must be something else wrong with the contact Sensors to homey, as if the signal is different for the contact sensor, then a motion sensor/wall switch (apir-2150 worked well with the motion sensor itself) @Emile ?
-
@Bumble ; Those tips were for the not pairable contact Sensors of the OP. The not sensing of the contact sensor is a (another) bug. You could try to pair the contact sensor as a wall switch/motion sensor, will look weird in flow, and you will hav…
-
@NewTon be careful there, I am not an athom employee But still, then it will most likely be fixed in near future updates, they updated the app a lot since yesterday. (I did say it might be fixed) And acd-300 (an acd-***) is a dimmer. So that's…
-
To see if you had everything right: Battery is in it correctly? Are you holding it the right way next to each other? (the arrows need to point at each other, or as shown in the animation the slids opposite of each other) If you listen closely whe…
-
@NewTon Kaku has been updated to 2.0.4 maybe it is fixed, I cannot test it myself right now, but the problem was known.
-
@Hermelijn ;; A little bit more explanation: Association groups in zwave+ (zwave 5) are different parts of the sensor information is going to be sent to. group 1 = lifeline / heartbeat. This will have 1 id, the Id of homey. All sensor information i…
-
What is the distance of the Sensor's and your homey? Have you tried restarting your homey by pulling the power plug? (keep it off the power for a few seconds, 10 at minimum) You will not need any other devices with your homey for kaku
-
@tim1990 ; KaKu motion sensor are indeed sending a separate on and off command. So if the off command is never received by homey, the alarm will stay on until it receives an off command afterwards from the sensor. You could see the motion sensor as…
-
Ok, so here are my findings with the new KaKu update (2.0.2): APIR-2150 (outside motion controller): I can pair it, even though you can only really pair it with the learn switch, before you could just activate the motion sensor itself (which is pra…
-
https://trello.com/c/1Nn24t2J
-
@daylfy ; You have interpreted that completely wrong. It is the same homey, except for the reason it was put together by themselves, and the ir command was competently hand written, so not a copied IR-code The homey's are now put together by a comp…
-
Z-Wave will have to be implemented by @Taco so you could try to bug him for adding it to the z-wave apps.
-
@Weatherlight ; i think its a little bit standard answer but: you first write down what you want to see, and look for any possible ways to do this and choosing which way seems right/easiest for you. I'm a "learn while doing it" with a lot of trial a…
-
You could try to add the dimmer as a normal socket, this way you will have an on (and off) command, and then send the on command while the dimmer is on to see if it dims. You will lack the dim functionaliteit though.
-
Awesome that you are trying to do this. I've been busy with my own dashboard for several months now, but it's not build in a way that is easy shareable. Started using my nas, but it was getting a little bit slow. (was already trying to get rit of …
-
@swttt If this option is to be added to a Z-wave device it would mean a new capability, so not very likely to come with this z-wave(+) version indeed.
-
@swttt ; It's true it has 2 inputs (normal switches, so no dimmers) This is for like hallways with a switch at each end. @p0nts It looks like it has no outputs at all, so it's like a wall switch with 4 buttons that can controller multiple devices.…
-
@mylles ; No, and don't expect that to be implemented in short term, more like several months. It's low on the priority list
-
At the moment, there are no z-wave devices that have 2 dimmable outputs, even the way @mglat purposes will leave you with 2 separate modules behind the dual switch or near the lamp itself. I think there are no devices because of the limits z-wave h…
-
@fiek try to read on this very threat, like 5 messages back keverjeroen said: On Slack Emile says it isn't comming this week..