This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@Eternity Just though if this: Its a range problem Let homey build up his mesh network, keep the zwave activity to a minimum for atleast an hour for sub 8 devices, add 15 minutes for any extra devices (this includes battery devices) After the mes…
-
@nicor Thanks you.! That information does a lot. 1. It's the same as fgs-2** in switching. (almost copy paste) 2. It has the new "central scene" command class, so will be able to add single click, double click, long press and long press released.…
-
@nicor It's not that hard, open chrome's console (right click any where on the page and click "inspect"/" inspecteren") Then start the inclusion process, and wait for it to be done. After that you will see a list called "node info"
-
@nicor The 2*3 not until I have what I asked for, the overview of the node info that's get printed in Chrome console when trying to include it. The 2*2 you will have to wait for athom to accept the pull request
-
@Eternity ; i guess you misted the (multiple) posts i made in this treat about S1 in the [IF] column: https://forum.athom.com/discussion/comment/29416/#Comment_29416 https://forum.athom.com/discussion/comment/30080/#Comment_30080 but that there is …
-
Can you show me the flows? Cause I don't understand yet why it isn't working for you
-
@Peao ; have you tried to first do homey's z-wave device reset? in Settings -> Z-Wave -> [Remove a device]
-
this is what the manual says: Wake up Strips manually for Z-Wave communication. Place the round magnet (B) at the rounded edge. When the LED blinks, move the magnet away. Repeat 3 times in total within 10 seconds so no not when the led blinks, …
-
@JanH have you woken up the strip? or wait until it did automatically? (it will only send the parameters as soon as the strip wakes up, also know als "battery saving mode")
-
@MarcoF "walking around the real issue" the option i give in git wil give the possibility to what the other controllers also do... 2 devices where you will get 1 device for main and relay 1, and 1 device for relay 2... (do you really even know how …
-
that's a known bug that they are working on, its not just with "ventilator" it's any other device you select other then the "normal socket". It's got to do something with what capabilities are accepted for what class types, only on/off capability is…
-
@MarcoF we have it the same way? there are 3 "devices", device 1 (the full name) is the main controller/config device, even though it has ALSO the capabilities of relais 1 at the moment.., device 2 (Relais 1) for endpoint 1, and device 3 (Relais 2) …
-
Homey -> transforms into... Homiette.!? (seen to many anime ) 2 minutes is a pretty long time for the z-wave chip to be busy, time to have athom activate the "what is the z-wave chip doing debugger" for everyone (@emile pretty please? makes de-…
-
ah, its a busy z-wave controller.. does it stay that way for a long periode of time? if so, what devices do you got included already?
-
while including devices, the signal is really (really!) picky, if one piece of information is lost it will get a timeout, most of the time while in "checking for version command class". i had 2 weeks ago while creating drivers (boy you do include an…
-
what is the distance you are holding the sensors from homey, more then 1,5/2 meter?
-
@MarcoF, @RobinVanKekem ;; no, no, and no. first things first, the main controller (the one with the full name) is relais 1, the one with the name "relais 1" is relais 1 as well but does not get reported to, so if you want to use the relais 1 in [IF…
-
ah, that was what i'm looking for, @RamonBaas thank you very much. Too bad that i can't try it out yet.
-
@Fire69 i know what the command classes are, and what they do. but i need to know how homey sees them (that's why i'm asking for the node info that homey gives) there are certain things that are not being specified in the XML's of all the other co…
-
@nicor @kasteleman I was just about to say, that module has not been implemented in any other controller with an open source. but seems like its just been added. I will need a copy of the node info though (gets printed in the chrome console when a…
-
little update on the status of the app: Dimmer (2): there is missing something in the z-wave driver that stops me from adding the S2 button properly like it should for control with homey (for both the dimmer v1 and v2), so its a wait for that to be…
-
FGS-223? that does not exist, must be a typo from the webshop you bought it from.
-
@Reemster it will be better for that function to be included by default into the capability, otherwise for all "motion sensors" this will be needed to add, not just on the fibaro one. Dutch: Het zal beter zijn als deze functie standaard in de capa…
-
ah figured it out, something i missed, its the way homey handles things, it thinks the variable changes 2 times very short after each other. solution, add a 1 seconds delay to the math card
-
@ThijsDeJong I did not use any mp3, it's just an example file name. Do you lower the counter with 1 every loop? If so, since it's 7 seconds its pretty easy to see what the counter does in the settings, just change the timing from 1 hour to every …
-
@tweaqer I think you can only update modules if they are connected to the hc2. And it's not possible to remove a node from homey, add to the hc2, update, then re-add the node to homey, all from within homey. So i think it's very unlikely
-
@djesko, @blusser you're welcome
-
@fredsky ; the only stupid question there is, is the one that is not being asked. (unless its been asked too many times already.) at the moment that function has not been implemented, and my guess is that it will not be implemented very soon. There…
-
app update: I've fixed the issues @djesko had with the icons and the wrong device being added. and have put the developer branch now completely as a pull request. I think the testing that was done yesterday was enough reason for me to say that input…
-
@snijplank it doesn't matter if they are on a different controller, the protocol the controllers are using is the same, and that is switched with colors red and green when using a GU10 vs LED strip.