This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
then it's a wake-up "issue" the default wake-up time of the sensor is 6 hours, which is quite alot... but i guess necessary for long battery life. fibaro logic: how to get our device to last a year on a battery, good for putting it on the box, o wa…
-
or if it has not been getting connection to your router, turn off the 5ghz part of the router until it has been connected, then you can turn it on again
-
@jovink ;; ah right... i was confusing it with the wrong sensor woops i will test it tomorrow, and add my own door sensor again, have a little bit newer version but shouldn't matter That much. btw just for some more information, does it change sta…
-
@jovink ; then it's an "over time" issue, almost seems like homey is losing the module for too long when trying to receive the data.. what is the distance of homey to the sensor? ( i know the sensor range test says green, just curious) and do you ha…
-
@SizarKamar ;; what kind of error is it giving you when you try to apply the raw parameter? please show a screenshot of the (raw) parameter and error if you can the parameter is not implemented (and won't be) in the normal settings for the very rea…
-
@ErikB ;; there is a Big difference between homey and hc2. homey has 5 (1 inactive) different RF based chips inside, which all can interfere with the other's frequenties. to make it as stable as possible you will give in somewhere, and that is the r…
-
@MartijnDeRhoter try reading the readme of the app before asking things And there is a difference between your double switch (fgs-223) and double Relay Switch (fgs-222)
-
@mranderson I will look into it when I get home, there has been more problems with the signals of the sensor (it always would stay "no" even when alarm was triggered)
-
@jovink hmmm the report didn't change, maybe because of the included optional temperature command class, try re adding it to homey (sorry if it is using in a lot of flows)
-
@jovink, what version of the door/window sensor do you have @djesko, the setting of the tamper alarm should have been set automatically to the proper value, it might not have send it properly if you just added it. so change the parameter setting to…
-
eurotronic Comet (central heating valve) which is almost done. and fibaro universal binary sensor (very troublesome module)
-
if it is already included as an unknown device, no. well... maybe if i need the device type id and device id, but those shouldn't be the biggest problem. if i want more information about a device it needs to be re included with Chrome console open,…
-
their manuals are not helpfull at all for the command classes used (already checked that), some devices even don't have a manual specified on their page i never follow forums for devices except for when its really really needed, they contain so mu…
-
if it has the command classes (and optionally the version number) then yes (i believe I've already seen some xml files coming through before)
-
if i'm done with the devices that i'm now working on (2 devices at the moment), i'll look into it, but don't expect it too too soon (like a week or 2), so if anyone else is interested go ahead. one thing though, it seems a lot of their devices aren…
-
What kind of z-wave devices are we talking about? and are there a lot?
-
tpillen said: Maybe they are doing that, but in the statement from @emile he wrote that it will propably become stable at the end of this week. So then i would loose my danfoss lc13 support for at least a few weeks, probably a few months (before so…
-
@tpillen ;; for @Emile z-wave is next on his list, so it will probably only take a few weeks at max, and it has gotten way better, a lot more stable and more dynamic. There is just a lot of things to write for, there are over 100 command classes al…
-
does that mean new app store hype?
-
i'm using this for the flow screen device list which was becoming way too big: .item>.label>.name { font-size: 13px; font-weight: 500; height: 20px; line-height: 20px; } .item>.label>.icon { width: 20px; height: …
-
Confirmation has been given that the command classes that we need to use aren't implemented (completely) yet, at least not far enough to be able to be used. So we have to wait until we can create drivers for thermostat/thermostatic type devices. E…
-
@kasteleman i've been working on another z-wave thermostat type device, and came to the conclusion that it isn't properly implemented yet, at least the version the thermostat setpoint i used, wanted still a lot of Buffer values, and can't get one o…
-
JohanKuster said: I'm waiting for the new flow editor that was promised long ago. If they don't give any details or any sign of progress I can only conclude they are not working on it. I believe they didn't introduce the ability to add folders an…
-
@MartijnDeRhoter i think they are waiting for 0.10.2 to come that should fix a small issue in some drivers. (modules that can have optional temperature sensors). At least, that is my believe. It's been waiting for a while to be accepted. (it has be…
-
@JohanKuster ;; Really..? Who says they aren't working on zwave and the enhanced flow manager at the same time. Do you even understand how complex homey really is? With reactions like "I can't make flows because it is just not good enough", isn'…
-
it seems like there has occurred an error with the firmware, you probably need to reinstall the firmware manually. you will need to ask support@athom.com for help with this.
-
@robin, see my last dm here
-
@mylles ; i responded to this question few day ago. But there is another small update on this matter, i can't add the temperature sensor's yet. The "optional: true" tag doesn't work with the external temperature sensors yet. I have not gotten any …
-
oh right, i wanted to help here It is not that hard. For the first step, you need to have both devices connected to homey, so the one you want to control but also the one you are controlling with. The only information you further need is the id o…
-
@djesko hmm, there are no specific binary sensor's out there that i know of. If you want to have a module that can handle a switch input you can choose something like the relays (they need 230v though). If you can't get 230v there you could look a…