This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@PatrickV did you reset the device already? did you install the app? what version of homey and app are you on? what is the distance to homey? little bit more information please we are no psychics
-
Yeah, you still need to manually install the Z-wave Driver. that will always stay with every zwave app you side load (CLI install) Might be viable to create a step by step guide including images for this.
-
OK, the app is done, i do would like the dual wall switch's flow triggers tested before putting it in the app store. The other two will work (most likely), it's really only the Right Switch that bothers me.. (no i did not get an email back yet, just…
-
@kriebelkous if i can get the workaround ready, it will be in 3 flow triggers (no conditions or actions possible, can't get the status of the right switch in any way, or alter the state from outside the switch) Right Switch [On] Right Switch [Off] …
-
@RobinVanKekem if i read the manual well enough it doesn't no.. busy sending them an email for confirmation about this (and also some extra info needed for the workaround) Let's hope they answer... it still is a Chinese company @DenW Send athom s…
-
@DenW i updated my last post, but this is the bad news: in short, i thought the double dimmer was Awesome.! but that just gotten a bit less now. seems like the right switch paddle is designed to only be control z-wave devices directly (the way yo…
-
@DenW ;;;;; no, that are the settings of an already included TZ65D i want the node information from chrome's console, like i explained in my last message, if you don't understand i'll need to find an other way to get the information, and that's.. o…
-
@DenW when you're on the device page in homey and press right click somewhere on the background you can choose something like "inspect" (don't really know the english name) you can also do CTRL + SHIFT + I (the i of information) that will open chr…
-
@DenW are you able to include your TZ65D into homey with chrome's console open? (and no TKB Home app installed) there is something odd (well i find it odd) i want to find out.
-
i don't know exactly, its what jeroen told me it was, in short, it keeps me from properly using any apps in homey including CLI apps
-
as long as my homey is giving system errors i can continu on this app, so maybe i'll be done before a fix has been handed to me but have a fantastic weekend yourself too
-
even though it is already on git, it's long from being finished. So not very advised to use it yet.
-
it is a default thing of z-wave don't have to write anything for it. already explained once how it's done here. and that is correct, if you use this way you won't need homey once they are connected Don't know the exact groups you would need to use…
-
i think you mean TZ65D, i think TZ67(G not D) is a socket. but somehow i changed the 6 and the 5 around.. that's my bad. (how did that ever happen.!? So Many Different Number.!) thanks though and yeah i can't continue with the last device i was w…
-
RobinVanKekem said: I'll check your PR so I can learn if you have any question about something, feel free to ask them
-
@DenW i have a question about the TZ56D, can't get my answer fully when reading the manual (i am pretty certain but just want to be sure) can you dim the outputs of the switch? or can the output only be switched on and off, and will the dim level o…
-
done i did not check the command classes, just fixed up the settings to what they should be in this version of homey, so if still not working, and i have some time left, i might look at this (did not do it immediately because it takes a lot of time…
-
@RobinVanKekem If you can wait with submitting for +/- an hour, fixing the settings for you in both drivers
-
no the message is depended if the module is online (awake) or not, online = settings been saved, offline = wakeup until settings are being saved
-
@Peao just to be sure, you know the wake-up time is being processed inside the thermostatic right? not in homey, so it will have to wake-up (manually) at least once before the new value is being used
-
@Rocodamelshe ;; i don't know which device you're talking about, it's different for a lot of devices. But it seems there is a "bug", the default specified in homey when nothing is set, is 900, which is kinda low for a lot of devices, already notifie…
-
@Rocodamelshe the best for battery life is maximum amount of seconds of course, even though your device will then only wake-up once in 2 weeks or so. all jokes aside, in most cases the factory default is about the good time with efficiency<->…
-
@Peao that actually means that scene activation has been implemented now, thermostat was already possible (see more in the official threat)
-
app could have been done before this update, and it already pretty much done, go and bug @Robin about it maybe he will finish it then and submit it to the store
-
chromecast and "tv" (ir remote?) don't have any mobile cards, so if you only have those kinds of devices then there won't be any devices to show on mobile mobile card is also viewable in chrome GUI in the devices, if none are there, you've got your…
-
then that is not something the app or homey can do about, the command is properly used and inserted. might been fixed inside the sensors with a firmware update.
-
it's the lack of amount of script supported in firefox vs chrome. There are a lot of scripts used that are just not supported in firefox that are in chrome. That's why you need to use chrome or the desktop app (which is practically chrome's inners …
-
@satbopper ;; that's because the sensors don't send their battery level when homey boots, only when you wake it up manually or when it wakes up on its interval
-
some awesome Z-Wave love in this update Point that is not in the changelog: - Add support Wake-Up interval for Z-wave (battery) devices
-
If they have an (open) API it could be possible and it is not just adjustable with there own GUI. @MarkSwift are you sure that you are talking about the same thing?