This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
@arthur did you select a different type of device connected to the wallplug while including? at the moment metering only works when you select "other connected" if so, you can change it only by re-adding it to homey at the moment
-
yay, love the formatting, but that is indeed what i need didn't update as much as i though it would, makes things easier will look at it when i have little bit more time..
-
@Menno Node information: Windows only: * using chrome browser * press "CTRL + SHIFT + I" (the letter i ) inside homey's devices page (chrome browser) * then there will open a bar in the right side * click on the tab [Console] at the top * add th…
-
no real docs aren't available yet, and won't come in short notice (more like a few months into next year) just trial and error with the examples of the many apps that there are now, and the documentation from z-wave alliance themselves
-
setting temperature was already possible, even 2 months ago, we only didn't know how there are 2 apps using it now, danfoss, and eurotronic (my own creation) eurotronic still using an early adopt, still busy creating updated version. @DenW i woul…
-
@bierre you can't compare the 2 sensors at all, not just because of different parameters But there is no 1 best settings, the best "all important information, good battery life" is already default, some people like longer battery life, some better…
-
@phil_s Some do have the Fibaro Motion sensor taped around the edge to make it "watertight" I myself took some ordinary cheap 230 motion outside detectors (non wireless) and stuffed a zwave relay module inside and connected the input to the switchi…
-
@phil_s The motion sensor is indeed build to detect motion, and the year battery life they mention is based on motion once in a while (like in the hallway), in the living room it practically detects and sends motion all the time. You could put the …
-
@phil_s ; Battery report can indeed be wrong, led must turn blue when triple clicking the B-Button, if not your battery is most likely empty. I see a lot of motion (the green?) so that probably is the cause of battery draining fast If that happens …
-
@Menno ; Nah, really need the manual itself, there is no parameter information on the box but already found the manual on Google But almost had it right with the product id 1638 => 1538 The only thing I need now is the command classes us…
-
@G4nd41f cool, didn't know that motion sensor now are also dimmer 2's where did you get those. association groups is where the corresponding information from the sensor goes to, look into the manual for more information about this. so no, if your…
-
@Menno ; You already got the z-wave plus version, though it would come in december, or even next year, so you are an early bird. will look into adding it soon do you have the manual? since it's not even on the site yet.. without it i can't add para…
-
@phil_s did you change any parameters?
-
have you changed any settings? if not then please try rebooting your homey
-
what version of the sensor are you using? the z-wave plus or normal z-wave version? does it change state at all in the mobile card?
-
@nicor It is already fixed for 3 weeks, the only thing still needed is an app update
-
or you can remove the "feature" and install it via CLI.? it's only a few lines of code to remove
-
I could even explain it to a no ICT guy The app is currently only looking if there is being send an "ON" signal and where it comes from, if it was not that sensor, it will turn it off. so if the "ON" signal is coming from the motion, it will tur…
-
For me it is the same reason is why i became a (early) pre-order. i really love the idea what homey is, and/or can become in the future. All the wireless protocols that they are capable of putting together in a 10 by 10 cm round box. It really awok…
-
reboot your homey Homey's settings -> System -> [Reboot System]
-
@Roppiee look in the device's settings under "association groups" if there is a "1" (without quotes) in group 4 if not, add it and save, that should solve your issue fix ETA is within 4 weeks (have no conclusive answer, sorry) but shouldn't take l…
-
the sentence is just written a bit wrong, it should be: "We can't provide you support when you are using a browser, Download the Homey Desktop App." "We kunnen je niet ondersteunen wanneer je een browser gebuikt, Download de Homey Desktop App."
-
if it is the z-wave PLUS version he needs to wait for my PR fix to be accepted and implemented. a re-add won't help the motion going (on/)off reliable at the moment.
-
@Amelsfort because it is an issue for a very long time now.. The issue is that that capability is not in the class type "light" but it is in the class type "socket"
-
@cnvisser there has been nothing changed for the relay switch, so it should have worked after updating to 1.0.1 how did you reset the switch, what is the distance between your switch and homey when including
-
And then press shortly again when it shows yellow? So it blinks red , and has been reset
-
to put a dimming module there, in the wall there is only space for 1 dimmer module, because you are correct there are no dimmers with 2 outputs. there are dimmers with 2 switches and 1 output (for light 1), and then place 1 module near/in the lamp …
-
what did you do to try and reset the plugs?
-
is there enough space in/near one of the halogen lights to put a module?
-
i would find that very strange, then the sandbox is there for nothing.. or you found a hole, and it is going to/should be closed soon let's call it this way, i would never want an app created by another developer be able to see/touch my flows... lo…