This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
caseda
About
- Username
- caseda
- Joined
- Visits
- 5,158
- Last Active
- Roles
- Member
Comments
-
the (a) developer needs to create their own flow cards for that.
-
Well, at least we now know it's an app.. probably also a modified homey (firmware) though
-
If the input is put into analog mode (potiometers) then you won't be able to change the led strip with homey, only controllable with the potentiometers (each input can be set individually though) But still changing parameter 14 won't add double pr…
-
@mauriceb How did you do that? The rgbw controller has no double press for full brightness and hold/release actions
-
correct, it will only be a skill, since the integration is for expandability (homey listening in other rooms then homey is in) of the speech integration of homey, and not as an replacement of the one build into homey in 1.2.x (upcoming big update) …
-
@mruiter You can turn on/off the smoke sensor? Or is that only the alarm test, since it is now grayed out
-
It's either a custom firmware (which will never reach public), or just flows that are configured on homey to send http requests/rest app commands. Which can really easy be done already. @Annemarie?
-
@jstelten when I tested it, it was working perfectly. did you wake up the keyfob? (not by holding Circle and plus, homey doesn't know it's awake then, only use the menu way I described in a post before) It does not wake up on its own It's best to…
-
{ "id": "sensor", "capabilities": [ "volume_set" ], "capabilitiesOptions": { "volume_set": { …
-
@jstelten It is working, just not with the lock mode. for now that is, am in the talks with fibaro about it, but... they are not the fastest with responding. I have put the code on github for people that want to use it, and it works perfectly (exc…
-
You can do it 2 ways with the better logic app, and create a boolean variable with its corresponding bitflip device. Or create a dummy/fake 433 switchable device like with the "klik aan klik uit" app
-
@CliffBroeren then it is something i/we can't really fix, the device sends the 0, and homey just uses that since it doesn't know better. i could see if i can filter out "0" if the device is on, but that's not really something i would want to impleme…
-
@ericjanvanputten. expert parameters will always overwrite the setting parameter that is in the settings. if you want the expert parameters to be empty you will need to re-add the device, for that parameter to be set on inclusion. it is hidden from…
-
@CliffBroeren 0 but it does show several 0 points... Hmm If you look at the downloadable file does it have a pretty big list? (hover mouse over the 3 dots next to the capabilities name, and click download)
-
@CliffBroeren ok thanks for the info, I'll look into it, even though thanks to the total power consumption is showing, makes it more weird Energie is also not updating in insights by the way?
-
unless the qubino can be turned off and then turn on again within that second, it will never happen. it is very hard (practically impossible) to implement that to a device that has no "input activated" option, only an on and off state. the state cha…
-
@Remon if your name was CliffBroeren i would explain it to you But the values not showing in the mobile card is because you selected "light connected" during setup. at the moment it won't show those values when you select "light connected" only if…
-
@Remon did you see my response on slack? if not here is a quote: caseda [8:17 PM] @remon did you include the FGS switches as a "light attached"? if so, then that is your reason, should be "fixed" somewhere in the future that it also shows those i…
-
@Yannick Ze werken met wip schakelaar zelfde als met pulse schakelaar, zorg wel je settings goed hebt staan. IE: 1x ingedrukt = 1x geschakeld je mist alleen wel een aantal opties, zoals "lang vasthouden/loslaten" en de uitgang direct dimmen werkt…
-
Ok.. Unfortunately I bumped into a problem of the unlock not wanting to get active. (the only thing not working yet) So it's going to take a little longer before the driver is completely done. But indeed the keyfob, or for that matter any zwave bat…
-
I have the driver working, had a weird issue that the keyfob didn't want to scroll through it's menu anymore, and couldn't get it reset manually. but that is a mistake on fibaro's side they made a few BAD mistakes in their manuals. 1st mistake: Wak…
-
@Erik_van_Schelven TKB is pretty known that they don't follow the rules ... at all, so it might be that they changed something in that device, unlike all the other TKB devices that worked completely the same up until now. could you go into setting…
-
app has just updated to 1.0.2. Changelog: fix the dimming flow cards fix id's of TZ36 and TZ56
-
I don't have the time fully debug this issue, I have mine already behind the switch without using q2 output, so little cumbersome to test right now. Now that there is a debug log in the zwave settings. Could you take a look if anything comes in …
-
Already busy with the driver which is pretty much done. Still waiting for my one though so I can test it. There is a new feature in there that needs thorough testing before sending it to the public.
-
@OGS What trigger card, there are 3 different ones.. If it is "voltage changed" then I hope you looked at the small info icon, and thus have your setting input on "analog" You can see the values in the global tags, I did not put it in the mobile …
-
@DenW that is correct. Must be a weird coincidence that it went wrong for the times you selected the wrong one. And I think it was outside interference in your case, the looking up, if the id is supported by an app, is only done at the end. So af…
-
@DenW it is already working that way, and is not handeld by the app but the zwave core. The app only specifies the id's it supports. Also the reason, if there is no app where that id is supported, it will include it so a generic (unknown) device …
-
@Count_B s2 is functioning with its scene activation (so: single, double, triple press/switch; hold and released)
-
Have there been people here who have tested the rgbw driver, if you have tested it, did you find any bugs/not working how you think it should work? If nothing big comes up i will send it towards athom this evening for everyone else to use (and hope…