This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
bvdbos
About
- Username
- bvdbos
- Joined
- -
- Visits
- 3,433
- Last Active
- Roles
- Member
Comments
-
That's in the IKEA-manual... and was posted on the forum several times before... That were some lost hours then
-
If you cast from a chrome-browser to your chromecast you just cast a your computer-screen... Or do you mean homeydash (https://apps.athom.com/app/com.swttt.homeydash)?
-
Did you connect the line-out of Homey? Did you select a different output on the lower right corner? You might be able to stream to the samsung tv if it has chromecast build-in?
-
You could use chrome-browser instead of the Homey-app (which is a wrapper around a chrome-browser anyway).
-
Can you guys add that bulb to an ikea remote?
-
in short: never... At least not with all products, just as Homey doesn't work with all 433 products or all http-products etc etc. But specific devices do already work... Which ones are you looking for?
-
I'd say its: 10001010 10110011 01110101 with SOF = [ ] 1 = [313,959] 0 = [948,324] EOF = [321,3042] 1 and 0 may be the other way round, no way to know...
-
De pluggen werken al repeater dus extra repeaters zouden niet nodig moeten zijn.
-
Probably one or more parameters are out of range?
-
@EDV Did you read @Hellhound's last message? * Maybe Athom takes over * He was going to do an effort before September 11th * He wouldn't have time before October
-
https://forum.athom.com/search?q=ring+pro https://apps.athom.com/app/com.ring
-
What you could do is create a virtual device "Bioscoop" and add flows for that: if "Bioscoop turns on" then do actions. Advantage of this is that you also have an icon which represents the current state...
-
https://github.com/athombv/homey-arduino-library https://github.com/athombv/com.athom.arduino and https://athomcommunity.slack.com/homeyduino
-
In de trigger kan je geen periode zetten, alleen een moment. De zon komt op is één tijdstip, morgen om 7.45 uur namelijk. Een 20 minuten eerder is gewoon 7.25 uur. Niet een periode, dan kan alleen in de tweede kolom.... http://www.zonsopkomst-tijden…
-
Heb je de uitleg van mij en Caseda gezien? Wat wil je doen? Het moment van zonsopgang of zonsondergang in de "en"-kolom is niet mogelijk. Dat is namelijk maar één moment, een trigger... Issues aanmelden: https://github.com/athombv/homey/issues Of …
-
Dit is ook niet mogelijk. Een trigger is een eenmalige gebeurtenis (bijvoorbeeld: "het is 19.00 uur", "het is zonsopgang" of "een knop wordt ingedrukt"). De conditie kan niet een eenmalige gebeurtenis zijn maar een omstandheid: dus "het is na 19.00 …
-
Homey doesn't work through the cloud, it works locally: https://www.athom.com/en/support/KB000028/ Offline Homey will still be able to manage your home, as Homey is not dependent on cloud services to operate (unlike some other systems). Function…
-
You can set the level in Fibaro. If change is bigger then .... Lumen then the sensor reports the change to Homey... I have it set at 200: If the light turns off, the sensor reports that to Homey?
-
that's a known issue. Monday is next week... https://github.com/athombv/homey/issues/1684 you could use "not between tuesday and friday" as a workaround (tick the box for "not").
-
I assume you sent multiple times the same signal... Then I'd say it's (see file): 000010011001011100000001 With 0 being [302;913] and 1 being [915;301] SOF: [312,933] and EOF: [307;2587] Could also be an extra 0 in front of the signal but the 428 a…
-
There have been multiple requests but Athom chose not to complicate things doing this: https://github.com/athombv/homey/issues/444 https://github.com/athombv/homey/issues/1628
-
Dan zou ik een issue aanmaken op Github en een log versturen... Ik had iets soortgelijks maar daar was er een unknown zigbee-device...
-
It's not that hard to install from CLI: https://forum.athom.com/discussion/1448/how-to-cli-install-method TedTolboom 's repository under the SDK2 branch.
-
Kijk een onder settings-zigbee-stuff for geeks of er nog devices staan. Probeer deze vanuit de grafiek te verwijderen. En zorg ervoor dat als je één lamp hebt gepaired dat je deze lamp weer uit de fitting draaot voordat je de volgende pakt.
-
Difference is the zwave-frequency Homey is working on: https://en.wikipedia.org/wiki/Z-Wave#Technical_characteristics As for power, can't say for sure but assuem it will. However, Homey is powered by a main->usb cable so can't imagine that being…
-
If you feel like this isn't enough you could file an issue on Github requesting for more logging. Also there: please search for existing issues first: https://github.com/athombv/homey/issues
-
There is no other log, would be too much information, there's fulltime communications going around. Therefore there's multiple ways to make your own choice of logging as @lubbertkramer already pointed out. For google's search-engine's sake: https://…
-
Do you have the Link system? They claim it's non-zwave but you still get it paired as an unknown device?
-
https://apps.athom.com/app/nl.klikaanklikuit it is in the supported list...
-
martijn1980 said: The Z-wave network on my Homey has been reset to the factory default settings and all Z-wave products have been deleted. Also, the wall plug is within 50 cm from the Homey, but not able to add it. Anyone who is able to help me out?…