This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
brinkie
About
- Username
- brinkie
- Joined
- Visits
- 192
- Last Active
- Roles
- Member
Comments
-
Phuturist said: Could it be that the issue where the app crashes is caused by the app not being able to reach the hub? I power down all my AV equipment over night, so the Hub is not online. This morning the app had crashed again with the follow…
-
MrDutchfighter said: For me the following steps worked: - Remove hub as device - uninstall the app (this removes all device settings) - install the app - add the hub That makes sense!
-
Ronald said: After trying several times like uninstall , install, ptp it finally works did a reboot upside down keep all setting reconnected to wifi , reinstall and then 3 times ptp use chrome for selecting command it works. Now i am happy :…
-
paulus said: solved :-) ptp can do wonders Good to hear!
-
Phuturist said: spoelly said: @brinkie yup it does Stack trace: Error: read ECONNRESET at exports._errnoException (util.js:907:11) at TCP.onread (net.js:557:26) Exit code: 1 Exit signal: null I can confirm this issue, the ap…
-
spoelly said: I have a issue after sometime of use that the hub does not response on Homey commands. Restarting the apps solves the problem. But this is not how sjould work or it worked i 0.3.4 of the app Does the app show an error in th…
-
paulus said: since the 1.1.2 update is harmony hub not working anymore have more people this problem? Have you removed the hub and readded it?
-
Phuturist said: Phuturist said: I have almost the same issue but with a slight difference. I have re-added my Hub after updating and initially I had the app crashing when selecting my Haromy Hub in the flow editor. But after I restarte…
-
Good to read people are finding solutions for their issues with the transition to the new Harmony Hub app v1.0.0. I'll be monitoring the errors in my mailbox for the next few days. Hopefully the number of error reports will decrease as the days go …
-
I do see your point here. To prevent issues maybe I could have added a special clean-up method to remove the old devices. On the other hand, the app used to be pre-1.0 and the internals had to change for this release. It would have taken a significa…
-
Ronald said: not getting it to work Have you first removed and readded your hub?
-
I just submitted v1.0.0 of the Harmony Hub App to the app store for approval. It contains one major change: * App rewritten so it uses only one connection for each hub (hopefully preventing a lot of app crashes). PLEASE NOTE THIS RELEASE REQUIRES…
-
Fire69 said: Fire69 said: Fire69 said: brinkie said: Could you try the new app code on GitHub then? That works for me (just in a browser). I'll give it a try Stack trace: ... Exit code: 1 Exit signal: n…
-
Fire69 said: brinkie said: Fire69 said: Hope you can find a solution for the device commands not showing up, really missing that right now My guess is you're using the official Athom client, right? I discovered an issue wit…
-
Fire69 said: Hope you can find a solution for the device commands not showing up, really missing that right now My guess is you're using the official Athom client, right? I discovered an issue with that not filling the second dropdown on the…
-
Anyone here care to test the updated app?
-
Eternity said: @brinkie That is great news, both for you and for us! Hope to see the Harmony Hub state available as a trigger in flows again. You removed it, as it lagged the system. Works in Domoticz, though. Thanks for all your effort! …
-
Thanks Phuturist and Fire69 (amongst others) for keeping this thread alive. My house is now livable so I'm back at it! I've picked up development where I left off, so you can expect an update for the dropped connections issue before the end of the …
-
It worked! Tnx.
-
Aha, that might help! I'll try that, tnx!
-
I tried both. Like I said, when I press the button three times it just turns the wall plug on, off and on again. I already reset the plug to factory defaults through the process you describe. It confirmed it by turning red.
-
JurgenHuijbregts said: Fibaro stuff needs to be removed. Also if you did a factory reset : Go to Settings : Zwave : remove device... then 3 times press the button on youre wall plugg.... After you see it has been deleted, you can Add it again …
-
I'm still here and following all issues. There is a well known issue with the app not handling the connections to the hub in an optimal manner. This results in too many connection remainingn an open state. The hub limits number of simultaneous conne…
-
Published!
-
As soon as I get home ;-)
-
Harmony Hub App v0.3.4 submitted for approval. Thanks to @Phuturist for the fix! Work on app rewrite continues.
-
Sorry, Hope to find some time in the upcoming week. In between painting walls and hanging lamps in my new house.
-
This is probably due to to 0.10.0 update. It included an API change the app isn't aware of yet. I have to wait for the updated documentation so I can update the app accordingly.
-
Wip
-
The "current activity changed" card will return in the next release of the app. I'm working on a rewrite of the entire app, to narrow the number of active connections to the (each) hub to one. Once that is done, it shouldn't be a problem anymore to …