This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
anne
About
- Username
- anne
- Joined
- Visits
- 2,275
- Last Active
- Roles
- Member
Comments
-
Nice By that time you may want to check out 'PVoutputPro' for iOS or 'Mark McDonalds PVOutput' for Android. PVoutputPro has nice options and graphs. The paid version has support for multiple systems, comparisons and estimates.
-
Yep! I have noticed this as well (104 dB is hard to ignore ). It does this because the device class is 'light' (in the app.json file). It should probably be changed to 'other'. I looked into this the other day but haven't tested it yet. It involv…
-
Yes and yes! See the screenshot below. The trigger is a change in the amount of energy (W) supplied by the plug. You can use the 'logic' ('logica' in Dutch) flowcard to do something based on the value reported by the plug. You need to drag the labe…
-
Mooi dat het werkt :-) De naam in Homey maakt niet uit voor de communicatie met de plug, daar moet iets anders misgegaan zijn. Je kunt de naam veranderen door op de naam te klikken in het icoontje in de Homey 'apparaten' view, dat maakt voor de wer…
-
Great idea, nice feature! I'll add it to the TP Link app (it turns out there's a call for it: {"emeter":{"erase_emeter_stat":null}} ).
-
Hi Marcel, Ah, ok. The Homey app currently does not do autodiscovery, you need to manually enter the LAN IP addres of the plug. You can find this on your router, or by scanning your LAN. Check the MAC address on the rear of the plug, it says someth…
-
The only bit that needs to be configured is the IP address of the plug. Just to confirm, switching the plug on and off works for you, right? If that's the case, there is nothing you can or need to configure differently. I noticed this morning that …
-
Ja, inderdaad. Er moet wel wat veranderen voordat er wat weergegeven wordt, maar meestal veranderd de spanning (helemaal rechts, even schuiven met de scrollbar) sowieso wel wat. Om de 10 seconden geeft de plug de status door (mits er iets veranderd …
-
Zie je geen icoontjes voor stroomverbruik in de app? Dan gok ik dat je de hs100 ipv. de hs110 driver hebt geinstalleerd. Je kunt bij de apparaten de geinstalleerde TP link weggooien (kruisje linksboven op het apparaat icoon) en opnieuw installeren, …
-
Hoi Erik, Ik ben er vooral op uit om Homey meer functionaliteit te geven, ik zou eerder kijken naar functionaliteit die de Kasa app overbodig maakt. Los hiervan is het niet triviaal, je kunt via de TP link plugs wel wat informatie uit de TP cloud h…
-
The app has been published in the App store, check it out: https://apps.athom.com/app/nu.baretta.tplink It's listed with the 'recently published apps' instead of the new apps for some reason
-
The app is now available in the app store: https://apps.athom.com/app/nu.baretta.tplink.
-
De app moet nog door Athom goedgekeurd worden en verschijnt dan in de app store. The app has been submitted, waiting for approval by Athom. It will then appear in the App store.
-
Correction: I was testing the HS100 driver which doesn't have the energy monitoring options. In the HS110 driver you do get the power related triggers ('energy/power has changed'). :-)
-
Yes (without the energy monitoring option). I expect the HS200 switch will work as well, this will have to be verified by someone who owns one.
-
Hi all, I have a working app for my TP Link HS110. I will be publishing it shortly (later this week I guess), I will post a message in the Apps forum. Below you'll find screenshots from the HS110 mobile interface (with power usage output). Regar…
-
Hi all, I was inspired by the links provided, creating an app for the TP Link smartplugs appears to be straightforward and very similar to another app I created. I have just ordered an HS110 and I have the basic app in place. On/off functionality…
-
Hoi, De TP link HS100/HS110/HS200 worden nog niet ondersteund. Ik heb zojuist een TP link (HS110) besteld met als doel een Homey app hiervoor te maken. De app staat al in de steigers, het on/off gedeelte is zo te zien eenvoudig. Voor energie verbr…
-
Hi Caseda, Thanks for your response. I just gave it a go, unfortunately adding the 'capabilitiesOptions' bit doesn't do anything, whether the string is empty or not. When I enter the "volume_set" title as part of the existing "options" field, it's …
-
@CodeKing, awesome :-) The flows I use are simple (and iterative ). For scheduling the auxiliary heating (for the bathroom, electrical radiator plugged into a fibaro powerplug) I have 13 flows: - Three time periods per day, so three 'on' flows…
-
@CodeKing, nice! How about creating a general purpose scheduling app as a spin-off of the heating schedule app? I have several flows which do on/off scheduling, for instance for auxiliary heating (not thermostat regulated), and for 'occupancy sim…
-
For the past 2 or 3 months or so the Homey mobile app presence function has been working very well for me (on an iPhone 6s and an iPhone 7). I had issues before that, apparently an IOS update fixed it at some point. People with iPhones may want to …
-
Sorry, phone emoji's don't work Question, I really like the slide controllers and would like to order some, however I am not sure what the benefit is of ordering a 'perk' at Indiegogo as opposed to just wating? I guess you may eventually get th…
-
With the wifi API, Homey can surely control the slides. The HTTP request cards app is probably all you need
-
BTW, with the nl.ithodaalderop code (https://github.com/robertraaijmakers/nl.ithodaalderop) Homey can receive RF signals from the Itho remote. You can see the received data by checking the console (F12 in Chrome) and enabling the following function…
-
Hi all, Long story for those interested in a little project... While it would be great (and the ultimate goal) to get Homey to control the Itho directly, the nodemcu (a small Arduino variant with WIFI) + CC01 RF chip combination described at h…
-
The other day I had an issue with one user where home detection did not work. It turned out the 'home radius' geofencing setting was set to 0m. Apparently this had the effect of disabling home detection altogether, even though the 'Use home detectio…
-
I ran into the same issue with a Nodon wall switch. I am glad to hear you have the fix ready to go, looking forward to it :-)
-
Thanks for the quick response. I have used the 'always-on' option earlier with this plug while using it to measure the power usage of a refrigerator, but disabled the option as I have since been using it to switch power to a stereo on/off. Anyway,…
-
Hi all, I am having recurring issues with my Fibaro wall plugs becoming unmanageble/unreachable (the LED ring is on, but the plug does not respond, even the physical button is completely inert). Generally it only affects one plug at a time, althoug…