This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
Good idea... was thinking about it too last Monday (12:00)... But is this signal available?
-
Update to 1.0.3 went smoothly (no issues) @JeroenVollenbrock is there any need to re-pair modules (e.g. z-wave) to fully make use of the fixes?
-
Reviving this thread... I have a similar remote and would like to give control of the fire place to Homey.. Is any body actively working on creating an app the Mertik Maxitrol fireplace control? I noticed the following app under development (also…
-
At this moment, not yet. An app will need to be developed.... either by Athom or by the community. I will try this week to "record" the RAW signals of my remote (via Homey)... I do need some help to make the app (no experience yet). I propose to…
-
Robbertos said: This is the remote I have: https://i.ytimg.com/vi/mWB5LG7zbVk/maxresdefault.jpg That's a Mertik Symax remote: link to site Mertik Symax: more details A more advanced version of my remote a Mertik Maxitrol model G6R H4…
-
@Robbertos, the fireplace is a Element 4 as indicated by you. Can you indicate which type of remote you have / provide a picture of the details in this remote? This could be a Mertik remote, which is also used for other brands (e.g. Barbas, Bellf…
-
@caseda it must be... just take a look at the LUX reports (only driven by report every 300 seconds). During the night, no reports are added to insights (most likely since the value did not change)... With data nicely showing reports every 5 min…
-
keverjeroen said: @TedTolboom That looks a lot like my problem. Would it help if I add my findings to the issue? yes, would appreciate it. @caseda are you aware if there is a filtering of data entered into insights.. Support the motion …
-
@keverjeroen check the following github issue I have the impression that LUX threshold is not working properly..
-
WathLamers said: @BasVanDenBosch @HansieNL ik zou niemand bij mij in buurt weten. Ik woon in Waalwijk NB bij efteling in de buurt. Ik heb inmiddels een mail naar @Annemarie gestuurd met een hulp verzoek. English; I send a mail for supp…
-
chrisboer said: All is done now I am on version 1.0.1 so I got the shiny rainbow. De aanhouder wint zeg maar. With MAC completed the flashing, with Ubuntu without any firewall reset the Homey and installed it completely. I can now finally sta…
-
chrisboer said: Entered state 11 current progress: 100% Awaiting state: 12 Entered state 12 Awaiting state: 13 Entered state 13 Finished flashing: I have a…
-
HansieNL said: Nattelip said: i had to recover to today , but what the cause was is not clear ,i bought a homey from marktplaats, it started well using the recovery using the upside down method. it gave a setup network but then after …
-
Peao said: Thanks @TedTolboom , @MartijnDeRhoter and @jeroenbos22 . Recovery went good, everything is still there. A quick edition to step 1) URL for Recovery-Files: This is also listed in the topic a few posts above the linked one. @…
-
How to recover from PROUD (with Mac OS X, Raspberry Pi or UBUNTU): Credits to @jeroenbos22 and many others on Slack for supporting! Power to the community!
-
Fire69 said: MartijnDeRhoter said: I can't even get the upside down thing to work - at which point do you do this? Pull the plug, wait 10 seconds, plug it in again, wait 10 seconds, turn it upside down. Then it should start talkin…
-
During purple ring, I'm also not able to enter the recovery mode Directly after plugging in the power connection, when the ring is orange.. In my case it will blink red for a second... and continues in purple...
-
Same issue here... as already discussed on Slack.. PTP did not help and also trying to recover (turning it upside down) does not help... Homey wil briefly turn red... but then continuos it's purple mood up side down...
-
Phuturist said: It seems my Greenwave powernodes or not reporting the current energy usage correctly anymore since the update to 1.0.1. Anyone else experiencing this? The situation seems the same when I did not have the correct associations se…
-
As @Rocodamelshe suggested, I would remove the Zonsondergang card (not really reliable) and replace it with a fixed time (e.g. time after 18:00) and with an additional AND statement that the switch is OFF (to prevent continuous switch on if the swit…
-
Peter4209 said: After my switch from Homewizard to Homey I started to add z-wave devices to my house. I bought a Fibaro switch and a fibaro multisensor. The sensor should trigger the switch to turn on the light. Last wednesday I already added …
-
@Eternity would be interresting to see. Especially if you (also) don't have any other devices, next to the powernodes and Aetoec's...
-
Update on my stability issues: - With the flow adaptation, Homey is running stable again for serveral days - Re-paired my Fibaro motion sensors (with in between reboots and update to v1.0.1) Still my motion sensors show some "erratic" data repor…
-
Jeroenvano said: I fully agree with @Eternity , I used greenwave powernodes 1 from day 1 with homey, never had any problems since zwave became stable since the rewrite by @Athom . Problems started to occur since v.0.7.0 version and never had …
-
Small update on my issues as described above. Actions taken: - (re-) confirmed that the right parameters are stored on the motion sensors (by modifying the LED color) - Updated my flows to prevent the erratic data reports from my motion sensors to …
-
I am also experiencing Z-wave "stability" issues... after half a day, I'm no longer able to switch on my lamps connected to one of the Greenwave Powernodes... Z-wave shows to hang at "ProcesSendData" only solved by rebooting Homey: see my original G…
-
@nitehawk @Eternity on what software / app version did you install the powernodes? I had similar issues as described above, with my powernodes added to Homey on SW 0.9.x. My 3 Powernode 6's and 1 Powernode 1 are now running stable after excluding t…
-
Kritjuu said: YES I did @Kritjuu are you able to connect to and control Kodi on your Mini-x mediaplayer through one of the iOS or Android Kodi remote control apps (like Kodi remote on iOS)?
-
EvertorN said: TedTolboom said: With Homey 0.10.7... Looks like a Homey issue. Is Homey connected to the cloud? There's not really anything I can do about this.. Turned out to be a firewall issue... in order to get irtra…
-
With Homey 0.10.7 and Kodi 1.5.0 I experienced the connection issues @Kritjuu metioned. Logs state the the app is reconnecting. It was working before. I did not change any settings on the Kodi system and am still able to connect and control via the …