This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
After a reset (PTP or reboot) of Homey, the previous values (as available in insights) are not shown in the mobile card. Instead it will show a "-". Typically the NEO's have a wakeup interval of 6-12 hours, at which the battery report will be trigge…
-
Which action card do you use in flow 1? Activate or enable a flow? It should be activate. Otherwise, please include screenshots of the two flows.
-
@phil_s have been looking for more information on the Neo Coolcam NAS-PD02Z*. The only manual / more detailed description I'm able to find is at the FCC... but in fact this is the manual of the NAS-PD01Z* (no updated product ID mentioned). No regis…
-
Damn... another nice project / business case I have to defend at home...
-
Nice! What is your impression so far on the NEOO?
-
Why are you looking for in particular a wifi motion sensor? Why not use a Z-wave (like Fibaro, NEO or Aeotec) of 433 mhz (like klik aan klik uit)? These work, can be bought and are supported.
-
Nattelip said: @Povlov you are also on slack, there has been a lot of discussion about it. cant imagine you missed it . Biggest concern as discussed on slack is: But note, when going to a stabler version all settings and devices of tha…
-
Removed my devices, removed Kodi and reinstalled updated version (1.8.0) from Github. Re-added my devices (1x win7 and 1x RPi2). Running smoothly now, no duplicate reporting and flows are triggered correctly. 2017-02-18T22:06:48.404Z"Triggering flow…
-
JosStultjens said: I see in my ZWave mesh 2 devices(no. 17 and 19) not connected to Homey. I guess they are using another device to connect/mesh to Homey. I'd expect the zwave graph to show which device they are connected to, or am I mistaken? …
-
BvanR said: CoolCam on Gearbest are in stock again. HOME8OFF = 8% off Guys keep in mind to be sure that the devices are EU versions before ordering. Several users ordered at Gearbest only realizing that it concerned a US version during or a…
-
@EvertorN Installed 1.8.0 without any issues on Homey. Original Kodi (Win7, Kodi 16) was working without any issues Added 1 additional Kodi (Win7, Kodi 16) without any issues. Did experience some issues with adding the third Kodi (RPi2, Kodi 15)…
-
Klopt, die komt er ook, maar is nu nog een indiegogo project: MoveZ by Teptron https://www.indiegogo.com/projects/movez-motorize-blinds-and-shades-gadget
-
Sillyjan said: Sounds like a good thing to try. But as I'm using a Homey instead of a home center how can the firmware be updated? That's why I also didn't update the firmware... yet, even without the v3.5 firmware, it stopped flickering. S…
-
For people experiencing flickering (aka Ripple control effect) LED lamps on the Fibaro dimmer-2's: I noticed this blog post at Robbshop which, with implementing all measures except for the firmware update, solved my flickering LED's (mainly with 1…
-
Jschuetz said: Sounds like I have to wait. If so many have problems with fibaro and Neo devices. I do not recognize this... my Neo's and Fibaro's are all working fine @G4nd41f @aloft can you send additional logging / more extensive pr…
-
WRos said: Right now, I'm using the MultiSensor for motion in a "walk through room". Sometimes it doesn't work very well. In the morning the light is switch on. Tonight I wanna try to change the flows in combination with the countdown app. The…
-
@mightymarc2005 @ZperX Homey v1.1.9 has today been released to the experimental channel. It includes the ability to create a Z-wave map (in addition to additional logging and fixed Z-wave bugs); see Z-wave > Z-wave stuff for geeks > Network g…
-
@Jerryvdv can you add the Z-wave logging (Z-wave > Z-wave stuff for geeks > Log) for this particular Neo plug (filter the log on the Node ID number, e.g. 19) just after it occured? Did you reboot after the update to 1.1.9?
-
@satbopper Known issue with 1.1.4 (experiencing it myself). There are still a few bugs (e.g. Z-wave logging not limited to 500 lines) in 1.1.4 that will cause the system memory to keep increasing. Athom is working to resolve this; current dev prev…
-
@Annemarie the answers currently provided (also in the KB) do not address (IMHO) the question of @tonhasper. I can not answer myself, because this is not handled by the Z-wave driver but core. During a reset of the Z-wave network (as initiated fr…
-
DMK said: @mruiter can you give some more directions on how to do the debug log procedure? Download Github version of the app and install onto homey? And then? Working on iMac Will look in developers section to see if i can find any guidance …
-
@ZperX thanks for the feedback. Settings are saved correctly; so that should not be the issue. Based on your description, I think it's an interpretation issue... where you expect that no motion alarm will be triggered if the illumination is above t…
-
@DMK I think @mruiter is already or will be in contact with you on the additional data to complete the NEO touch switch implementation into the app @ZperX can you provide more information about this (which SW/APP version, settings, steps taken)? Du…
-
I was just looking on the Doorbird site (for the DoorBird itself).... and stumbled across this DoorBird Tablet Wall-mount mini 4.. Absolutely beautiful... but what a price...
-
@MrDutchfighter or to stop the countdown timer once the motion alarm get triggered and restart after motion alarm has been reset (best of both worlds)
-
While including the power plug to Homey, you get the question what is connected to it... you should choose "other" here (not socket or light or kettle)
-
And you're working out of the Homey app? of from a browser? What is showing and what not on the mobile card and in insights? Can you share a screenshot? In the Homey app, the slider (as shown in my screenshot taken from Chrome) is not clearly visib…
-
When did you add it to homey; all meters have been implemented as of Neo app version 1.1.6. If they are not available, you should re-pair the plug to add the additional capabilities. If that is needed, I would suggest to wait for Homey version 1.1…
-
In the manual that Neo Coolcam provides with the power plug it is mentioned: The load connected with the power plug shouldn't exceed 2500W to avoid damaging the power plug. See my comment in the NEO Z-wave topic Runs fine here with my Grohe Red (b…
-
Only way I know is to seperate it into 2 flows. First flow to calculate the difference (bv "Lux_dif") once the sensor is triggered (like my example above). Second flow once "Lux_dif" has changed AND "Lux_dif" is greater than XX THEN switch on the li…