This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
TedTolboom
About
- Username
- TedTolboom
- Joined
- -
- Visits
- 7,633
- Last Active
- Roles
- Member
Comments
-
@bartglim we are awaiting the single touch switch ourselves to finalize the driver for it; GitHub repository is already prepared by @m-ruiter for it... So yes, it will be supported.. (by the time you receive your switches)
-
Good to hear! On the apps.athom.com page you can look up all apps available for Homey including the supported devices.
-
@Homeyuser I might misinterpret your question; but no you don't need a Fibaro home station if you are want to connect a Fibaro Switch 2 or Dimmer 2... I have multiple running perfectly with Homey are you running into issues connecting them?
-
erreen said: Thanks for the answers. It's not mine intention to use the dimmer when installed the Ikea bulbs.The dimmer and all my other switches and outlets are from manufacturer Gira. Special line up. I cannot change this with another normal swit…
-
@mcfrush You will need to have an app supporting your specific device (ID's) It could be that the D-link door sensors are rebranded Devolo door sensors; you could compare manuals of both to see if the parameters (SW settings of these devices) match…
-
GerritKool said: Oke nog één ding hierover, ik begrijp dat jullie de voertaal Engels willen, nu is dat geen probleem maar het wordt vaak heel technisch Engels en dan zijn er toch mensen die afhaken, tenslotte zijn we in Nederland!! Nu mijn pro…
-
@GerritKool en @Eternity bedankt voor jullie feedback. Vooral onderstaande opmerking van @GerritKool, die ik volledig herken, toont aan dat we samen iets moeten doen aan de versnippering van informatie op het forum (Github en de app store): maar ik…
-
@Arie_Laxed I might be an option, but more complicated to implement, to give each mode a 'persistent' setting... if enabled, looping over the modes, should not turn these settings off one additional request, is it possible to save the state of a m…
-
@b3rt you could contact the developer of the Everspring app to either include the product ID's to his app or to make a dedicated app for it... With some effort to support the developer, you could download the Everspring app, add or update the produc…
-
bvdbos said: https://apps.athom.com/app/com.xiaomi-miio these already work with Homey through the gateway. As for direct support, people from the community are working on that (@TedTolboom I think) The Smart home sensors, buttons and sw…
-
keverjeroen said: glijie said: By the way. Is there a fast way to delete all insights? Now i have to select one by one and press delete and confirm. It is verry time consuming. Go to settings -> insights -> click on Delete al…
-
HarmLutjeboer said: Dit komt het dichts in de buurt, 4in 10 out. Er is alleen (nog) geen Homey app voor. https://www.robbshop.nl/din-rail-module-logichomecontrol Er is voor Logichome wel een app (gemaakt door de fabrikant zelf als ik …
-
Mod break: moved topic to Questions & Help
-
@vidjense strange... I also notice that your entire mobile card is greyed out; never seen this before... even the battery percentage that should be green... can you try to remove the smoke alarm and re-add it?
-
Based on this section, it should have triggered the alarm: [debug] COMMAND_CLASS_SENSOR_BINARY SENSOR_BINARY_GET args: { 'Sensor Type': 'Tamper' } err: null result: { 'Sensor Value (Raw)': , 'Sensor Value': 'detected an event', 'Sensor Type (R…
-
mvank said: Any news about fibaro associations? thinking about changing to homey, currently using home center 2 (like the Luna scripting, but support of zwave wallc-s is terrible. This is a very old topic, with outdated information.... …
-
Mod break: moved to questions and help section @mruiter is the developer of this app and driver. The driver is setup to trigger an alarm event based on the SENSOR_BINARY_REPORT and not the Notification class. Does the logging show this report ment…
-
@B3rt in the current app version the drivers for the Z-wave to AC controllers (ZXT-120 and ZXT-600) are not included, so you are not able to use them. I have both devices at home and will be adding the drivers on short term...
-
@micha35w I will have to see when I'm back from holidays. Zigbee issues prevented me to continue, now RC2 has been released I should be able to make progress again...
-
Mod break: moved topic to apps section
-
@konradwalsh can you share the source code with me? Mostly interested in the thermostat control loop... The app / driver I have in mind will handle the thermostat mode / controls by the app / driver providing a mobile interface card to set mode (co…
-
Hi @Lork, Welcome to the forum and enjoy your Homey. Learning IR is possible, but not always successful. Therefore, Athom is starting to release dedicated IR apps; at first for the TV brands. The community might extend it further... For the Air …
-
Yes it is possible to reset (delete) a single (or multiple) insight of a specific device... go to Insights > the Neo power plug > click on the 3 dots next to insight you like to reset > choose delete > confirm "are you sure you would …
-
@danone I'll add them when making the update. The Remotec devices are certified, so product ID's are available and for the ZXT-600 I received the info upfront from Remotec.
-
Please also keep in mind that the majority of the apps have the EU product ID's added, some now include the AU ID's and only a few the US... In most cases this is an administrative (=minor) issue where the app developer has to add the US ID's to th…
-
@relisys from the lux values shown, I would say you are using the sensor indoors in a shady corner; these fluctuations are normal. You have set both the interval and threshold to relatively low values; 180 seconds and 10 lux. Meaning that the senso…
-
The main question is, did you find the answer....
-
@MarcelKleine please try the search function of the forum... I know for sure this question has been asked and answered a number of times (this week) before....
-
@r6koelie if it looks like an Aeotec, it is most likely a rebranded Aeotec... The question is if it is only a rebranded device (I don't understand the kickstarter side of it) or that there are HW and SW differences... If it is a full rebrand, it …
-
RobinVanKekem said: You could try this instead of two Homey's: http://www.homecontrols.com/Zipato-Z-Wave-to-IR-Extender-ZPRMZXT120US And use Amazon Dot for voice, or a raspberry pi with Google Home. It's a shame both services doesn't support D…