This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Peao
About
- Username
- Peao
- Joined
- Visits
- 260
- Last Active
- Roles
- Member
Comments
-
If you have your homey updated to the latest stable version and use the fibaro app you can change the parameter of the operation mode with checkboxes. I used Door/Window Sensor instead of External Switch, that did the trick for me to let the alarm g…
-
After 3 hours of testing I begin to think that the sensor might be faulty... There was no manual delivered with it and I found +3 different manuals online with different parameter numbers. And I can only wake the sensor up by holding the outer TMP b…
-
Thanks for your fast answer! I made some progress but it is not fully working yet. I got the sensor now working that it displays the contact alarm once the doorbell is pushed and turns off again. I recieved this by changing the Operation Mode back …
-
Thanks for the tip with the fibaro door sensor. I just bought and installed one (FGK-101). I just got the problem that once the contact alarm (triggered by doorbell as external switch) is on it wont go off. I changed parameter 1 (input in alarm canc…
-
@Robin @Emile Any update for the official IFTTT App release? Since your software status update from 14.10. where you stated that the App will be released one week later, we haven't heard anything. If there are still problems you could open the be…
-
I tried it but it didn't work. Still the E5 error. When it shows "L1" and press the middle button the "signal" icon starts blinking but after 3-5 sec the E5 error appears again.
-
Yes this is not working for me I can't even change the temperature manually because the thermostat shows this error instantly when you push a button, and it wont go away. Dunno what causes this, I changed the wakeup interval but it did not help. …
-
G4nd41f said: @Peao Did you solve the E5 error? I just encoutered the same problem. Will try a shorter wake up intervall now... I just stopped using the thermostats buttons and only adjust the temperature via Homey. You have to wait a…
-
Thank you very much for the explanation! These issues are not a show-stopper for me anymore. I can use my thermostats with homey and I don't need to re-check the setpoint anymore because it worked fine for me the last 24h.
-
caseda said: @Peao what wakeup interval is your lc13 on? It is on 300s. I tested it again a few times. The E5 error is still there so I can't change anything at the thermostat. But when I change temperature with homey it changes the tem…
-
Am I the only one with this error? Maybe my thermostats are the issue
-
Yes @RobinVanKekem would be a nice addition! Thanks:)
-
I have a wired doorbell, is there a solution that can trigger Homey and that has a silent/sleep mode(disable the Ring)? I found this Honeywell doorbell which can be connected to my existing setup, but I dont know if homey could recieve its 868mhz …
-
Yes I second that, it would be nice to have a shortcut to the insights, but it should only be a small icon at the device card like the mobile card is atm. >90% of the cards space is not used atm.
-
The app is now in the appstore. I installed it last night and it looks very nice. The first minutes it was working fine after pairing but after a while it stopped working, because the E5 error came back again E5 means that the thermostat is n…
-
I changed the wakeup intervall (and woke it manually up to recieve the changes) but it didn't help. Yep, I woke it up manually ( a few times ) but it didn't help. Offtopic: When I update a battery device there comes a popup which inform…
-
Dunno if this has been reported yet (and I am not able to search this thread for it thanks to the forums searchengine): When I add a second Kodi in a different room both are not working (all related flows don't trigger anymore)
-
Hey I tested the App, here are the problems that I found: - I had to remove my Danfoss two times from Homey. A single remove did not allow to enter the pairing process (not app related) - When I change the Temperature in the Device Card and reopen…
-
* Added support for 'Controlled' Z-Wave Command Classes Means this my Danfoss Valve App is coming soon?
-
If you are the owner of a android tablet/phone you could use this workaround with sonos instead of chromecast, too. https://forum.athom.com/discussion/2015/my-spotify-deezer-multiroom-homey-workaround
-
I forgot to mention that you don't need a rooted Phone/Tablet for this workaround. Here is the video as promised: And thx @all who are making Homey to an awesome smarthome
-
Could Microbots and Homey work together without Prota, once Homeys Bluetooth API is finished? Like as they work with a smartphone directly.
-
I created a github issue for the annoying "extractpath not writable" error that shows everytime I update Homey to a new firmware. You can simply fix it by rebooting and trying again (a few times). But I hope that we can find the cause. If you have…
-
This is the actual topic: https://forum.athom.com/discussion/1041/danfoss-lc-13-app But there is not that much progress made, yet.
-
Emile said: I'm going to add 433/868/IR debugging tools soon, where you can capture raw signals. Is this tool out yet @Emile ?
-
Github issue: https://github.com/athombv/homey/issues/891
-
Trustme2 said: MikeOne said: Unfortunately, this Homey update killed the Plex App. I'm getting bombarded with Crash reports by email (I'm the developer). I kills the app with such a generic error on such a silly line of code, I don't e…
-
IFTTT is not working for me since I've updated Homey. Issue: https://github.com/athombv/homey/issues/891
-
It is getting cold in here Any updates?
-
superice said: Peao said: When I open the App on my tablet and log in the background turns white and I can't see any devices. The voice graph and the top room display and changer are functional though. Maybe becauce its a 2560x1600 scr…