This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
KeepT
About
- Username
- KeepT
- Joined
- Visits
- 105
- Last Active
- Roles
- Member
Comments
-
how can i check if the stackoverflow is causing this?
-
Johan, I have a similar experience. My kaku awst 8802 switch and my kaku doorbell only work once. Kaku app crashes or something in the flow crashes.. as my kaku acd1000 outlet works fine, even when the doorbell and switch are not responsive. I thin…
-
RobinVanKekem said: KeepT said: my zwave.me times out before connecting. Have to fiddle around with this. Which device do you have? I have a Zwave ME 05433. Cannot connect it to homey (it could be connected in 0.39): In the…
-
thumbs up for 0.9.2 and Athom! Kaku works (ACDB-7000, APIR-2150 and new in 0.9.2 is that ACD-3500 also works) still have to try and reconnect my AFR-060 that stopped working Smartwares works (SH5-TSM-A) LIFX works (as it has been working fine) m…
-
tim1990 said: The new updates finally solves the problem for me! Yes much better reception and reach in 0.9.2 in both zwave and 433
-
Trying to add my zwave.me switch as a device.... In the zwave pairing process, while the command classes are fetched, my zwave.me switch times out, terminating the pairing process. Moving homey next to my switch does not help to get the communicatio…
-
@JeroenVollenbrock , I noticed that 0.9.1 got a decrease in zwave reception. Just yesterday, I tested by moving Homey closer to my zwave switch. That allowed Homey to reconnect and to toggle the switch. Moving it back to its original location, cause…
-
I noticed (and I think this has been mentioned before (at least for the 433Mhz frequency)), that the Zwave reception has decreased with the 0.9.1 update. Moving my homey closer to the zwave switch, got it connected again. Also read that Athom is wor…
-
Friday, right? Everyone recovered from the improvements (and minor annoyances) in 0.9.1?
-
@Icarus , Thanks for the advice, I will try tonight. The device might still be connected to homey (although homey currently does not display any connected zwave device). And reconnecting would indeed fail if it was already connected (somehow invisi…
-
RobinVanKekem said: KeepT said: I have a zwave.me ZME_05433, but that does not like to be paired with your zwave.me app Do you know if the version of the zwave.me switch is the causing issues? I was able to pair it to homey using home…
-
I have a zwave.me ZME_05433, but that does not like to be paired with your zwave.me app Do you know if the version of the zwave.me switch is the causing issues? I was able to pair it to homey using homeys zwave app (0.39), but since 0.9.1 homeys zw…
-
mvdkallen said: Ok I found out that even though Homey says that there's an error in the flow, it works! It's a bit of confusing because the red-cross icon makes you believe there's an error though... No, in my case the error results in N…
-
just encountered another issue (might not be specific to or caused by 0.9.1) My push notification did not work. Turned out that homey has duplicated the device to send the notifications to (now I have two identical phones in the list). The first ph…
-
@Crunch , The email app worked great for email notification of triggers etc. In the app settings I have it email to a gmail account (using smtp, as indicated in the app store (allowing less secure apps, etc)). That all worked great, until July 30t…
-
My Zwave.Me dimmer (ZME_0543) that used to work (at least as a switch) does not work in 0.9.1.
-
Thumbs up @RobinVanKekem
-
@MatjaLipu Kaku/coco v2.1.0 is in the app store, but cannot install this due to incompatibility with 0.8.39. which homey version do i need to install this kaku app? I tried to add my afr-060, but only yhe dimable afr-100 seems to be supported. How…
-
Thank God it's Friday! Any news about the upcoming update?
-
no, @MennoVanGrinsven not all kakus are dead. e.g. my Kaky APIR-2150 is working fine. And some other 433 MHz devices work as well. So the problem is not specific to 433 and does not effect all Kaku.
-
Another thing i notifed is that the notification of push messages stopped working in 0.8.39. Am I the only one with this problem? I rebooted, made a new flow with notification, but the problem persists.
-
In 0.8.39 Kaku stopped working, but not for all devices. AFR-060 is not working. Not even after reconnecting the device to Homey (the device is recognized by the kaku app, but cannot be switched), not after reinstalling kaku app, not after rebootin…
-
@Alle You forgot the best! Zwave.me allows switching, flushing and dimming being build (invisibly) into standard electrical wiring, Behind your own outlets favorite plates and switches. Best of all: zwave.me is compatible with 2 wire circuits.
-
MennoVanDerAat said: After some heavy fight (zwave 3 - me 1) I've managed to create two flows with motion detection: 1. On motion (FIBARO MOTION SENSOR FGMS-001) turn on lights (zwave.me ZME_05433) 2. On no movement (FIBARO MOTION SENSOR FGMS-…
-
Updated to 0.8.38, Homey is still muted. Rebooting did not help. Testing speach works, but having homey talk from within a flow, he refuses. My homey is voicing dutch ruben. Will test switching to english, now.
-
GeurtDijker said: Gerjan said: It look like my 433 range is not to good, I have 2 KAKU Motion sensors. about 4 and 7 meters from Homey. inside walls are between them. Anyone same issue? You are correct ;-) Your transmit powe…