This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Julian
About
- Username
- Julian
- Joined
- -
- Visits
- 1,884
- Last Active
- Roles
- Member
Comments
-
I fully agree with the 'workaround' for the living room (I have something similar myself) but that does not solve the curious case that when Homey apperently does not understand 'living room' it only turns on part of the lights in your home?!? Shoul…
-
Hé, was just thinking about asking the same question! I have exactly the same issue (and have been using Homey quite some time now). When I ask Homey to turn on the lights in the living room the light in the bedroom sometimes also turns on, but th…
-
But then I don't understand, because you only want to control the lights via the wall switches? And not via Homey? Then it does not matter what the status is within Homey? But if you want to use a wall switch which when pressed also updates the st…
-
This is what @brinkie said in an earlier post: Obviously I've seen all the complaints. I've been testing and still am actually. The errors are no longer in the app itself. It's in a library the app uses. I just need more time to pinpoint the issue …
-
@B3rt; to whom or what are you replying? Because this is exactly what I am saying and @swttt; has already indicated that he would try to implement the trigger buttons in HomeyDash. So we understand you perfectly, no further explanation necessary
-
B3rt said: Yes i can start/trigger the flow by turning it on or off but should not be on/off For developer: Maybe a (not sure if possible) to add a kind of auto off trigger to the tile. I mean, the switch is always OFF, when i click on it it turn …
-
Bij Smart Presence moet je het eens proberen om bij de gebruiker (!) de Afwezigheid Vertraging op 600 te zetten. Dan gaat hij pas na 600 seconden afwezigheid je aangeven als afwezig. Als je dus thuis bent zal je iPhone wel binnen die 10 minuten weer…
-
I think if you use in the AND column a Better Logic math.js expression using the '<' calculation and select the (generic) tag for the 'binnen_lux_old' you should be good to go.
-
@swttt Same here, I think I used a copy/paste action the first time with changing the IP-adress, am certain I did not do it properly via the 'Go to HomeyDash' link in the settings
-
Eternity said: @Julian PS In HomeyDash, do you see the correct Bitflip toggle on/off? @Eternity ; I just tested it and at first it did not toggle (in Chrome on my PC), but then I saw this a couple of posts back: - go to my.athom.co…
-
@Eternity ; will check later, need to reprogram the dashboard in the new version. But I remember seeing it change when I flip it on my phone. Also, in my setup it does not matter which light setting is on or off (DIM1 and DIM2 in your setup), it j…
-
@Eternity; You do not have to create two different flows, well anyway I did not. I have made a 'master' flow, let's for example use the normal lighting scene. I have a BL variable 'Lichten_wk_normaal', and if that BL variable changes (does not matte…
-
@swttt ; first: great app, really like it and thanks for the hard work! Greatly appreciated. Second, would it be possible to use the new Trigger cards of Better Logic as a Card in the Dashboard? I used the BitFlips as a trigger and that worked fin…
-
Last Friday I received my new router, the Ubiquiti Amplifi HD. Everything worked flawlessly but no matter what I tried Homey would not connect properly and when it connected it would loose its connection very quickly. Spent quite some time tackling …
-
I also have two Forest Shuttle curtains and I agree they work very well, very low noise. Before there was a specific app I used the KAKU ASUN-650 and am now using the Homey Forest app without any problems.
-
Hmm, with the settings I use it works ok, it is accurate enough. But that probably also depends on what you want to achieve in your flows.
-
Yep, that is correct. You have to be away for that amount of seconds before it changes the state to away.
-
As said I had the exact same issue (wife + old(er) iPhone) and for me it worked when I set the delay time to 600 seconds instead of 900. Did you already try to reboot Homey after changing the settings just to be sure? With a delay of 900 seconds the…
-
Apart from the visual aspect this is already possible? I have made a BL variable that changes all my Living Room lights the way I want it, normal for well, normal, low when I watch a movie and 100% when my son want to play with his lego This way it…
-
Did you also change the setting at the user (second screenshot)? That is the time it takes before it changes to away.
-
I had these issues also with my wife's (older) iPhone that it would lock up and thus would not work anymore. I changed some (standard?) settings and since then it works 100% (beside the one time I had to click on 'save settings' ) These are 'my'…
-
djesko said: Changes from dash to homey syncs , changes from homey to dash needs a page refresh to change. Nope, I see it change immediately without a refresh. But perhaps that depends on the browser?
-
Uranday said: Im going to build a virtual button in Better Logic. This will be implemented as a special variable 'Trigger' With that trigger you can make a device that is a button and if the button is pushed, the trigger is triggered and thus …
-
Now for something completely different when I add the Harmony in the IF column I get the card 'Activity changed' with a value tag. I got it to work that when I turn to e.g. watch a movie (either from off or changing from another activity) the light…
-
Ok, thanks for the clarification! Remains the question why a temperature slider is available, for confusion purposes?
-
Julian said: Just to be sure, should the power usage etc work when using the Aeotec Dimmer 6? That seems not enabled when I pair it with my Homey? Is that a bug or am I doing something wrong when pairing? Never mind, after the update o…
-
I just bought a Milight bulb (5W RGBW E14) and wifi box to try it with Homey. It works, no problem, but I noticed that although I ordered a RGBW bulb (and it also says this on the packaging) on the bulb itself it says "RGB WW", so I assume it is a (…
-
Just to be sure, should the power usage etc work when using the Aeotec Dimmer 6? That seems not enabled when I pair it with my Homey? Is that a bug or am I doing something wrong when pairing?
-
ericjanvanputten said: Do you guys have that LUX stays 0-ish a lot as well, even if its not dark where the sensor is? I have it in the hallway and it keeps mostly to 0 lux. However when I activate the light in the hallway it goes up to <10 …
-
Hmm, good question, I just checked with an old Pioneer AV-receiver and the Harmony can only be configured to give a (single) mute/volume up/volume down command, so not a fixed volume. But perhaps this is possible for the Onkyo because this is a newe…