This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Jon
About
- Username
- Jon
- Joined
- -
- Visits
- 1,094
- Last Active
- Roles
- Member
Comments
-
@Rocodamelshe that's sounds nice. But how do I include this remote into a flow trigger then? Could you please elaborate? Edit: oh wait you suggest to do it without any homey flow, but a direct control. I need the remote elsewhere so I'm afraid th…
-
Nice @Gadgetruud !
-
By the way, this 'someone is home' function is not a great deal anyway. If I use the card 'a specific user is home' and I use myself as the user, it does not recognize that I'm at home. But I've been home all morning and funnily enough the 'insight…
-
Rocodamelshe said: U don't wanna click it, just hover with ur mouse Okay, thanks It says 'missing_listener'. Now what ...
-
Okay, now I resort to plan B. I want to use the 'presence' card in my flow, instead of the multisensor's motion detection. Fair enough. But this stupidly doesn't work either. What does the red exclamation mark mean, anyone knows? (clicking it does n…
-
Yeah @BasVanDenBosch but how do I use the 'motion detected' in a flow? Sure I can use 'if motion alarm turned on' as a trigger in 'when column' but I'd like it the other way around: First check the luminance level, then 'if motion was detected', swi…
-
the result is not exactly the same, because I only want to switch on the light if both of the following conditions are met: - the luminance is under my desired treshold. - there's motion detected in the room. So that's why I want to use both.
-
DaneeDeKruyff said: In the ...and... column: Better Logic Card 'less then' with variable 'luminantie' and your desired value In the then... column the card to switch the light on. Not sure if you read my question well. Because I know h…
-
Yes, but all in all it's quite costly. Better go then for Fakro z-wave opener. Also not cheap but: z-wave...
-
@vanillassky do you have more info about this, possibly documentation?
-
hi @Gadgetruud dat wist ik zelf nog niet. Heb je daar wellicht meer info over, of heb je dit zelf ook gedaan? Ben benieuwd hoe dit dan moet werken...
-
hi @Erwin1 it won't work. Axa uses some kind of encrypted IR technology that seems to fluctuate everytime the button is pressed. I have tried it with Homey, but also with Harmony and other repeaters, no luck at all. Also see: https://forum.athom.com…
-
Ah @ThijsDeJong haven't thought about this. I didn't know that there was a timer app available in the appstore. Have you used it before in a similar scenario, and if so: would you care to share a screenshot with us/me?
-
Seems to be working so far, @DaneeDeKruyff. Another question: let's say that I want to add to my 'lights on' flow (which switches my light on when lux under a certain level) that this only must be done if in the last 5 minutes there was motion detec…
-
@Arjan going from stable to experimental is easy. But switching back, that is that hardest part. (read: impossible so far!) So yes, we are forced to stay in experimental once we've made the step.
-
Too bad if that's really the case!! Since this was my main reason so far for installing this app!
-
Looks like quite a usefull app. But so faor the '(No) connection to the cloud' card does not work. I am pretty sure my Homey is connected to cloud (because I can reach Homey from outside my network). Yet, testing the flow below yields a 'positive' f…
-
DaneeDeKruyff said: @Jon DaneeDeKruyff said: try setting the RAW parameter 5,1,2 save and wake-up the device. (And then wait some) Haven't tried this on 0.10.0 but this sure worked (and was needed for me) on 0.9.x Th…
-
hi all, I've solved my mystery. It seemed that (during the start of the fall season) the sun peeked just in between some trees and hit the sensor (BAM!) straight in it's face during some hour in the morning. So the spikes were actually quite accurat…
-
Hi all, what's the quickest way to get 'motion alarm' working on the Multisensor 6 ? So far, with the settings below, motion sensor does not seem to work. For example: i have been at home all day today (and yes: within reach of the sensor, the green…
-
Ehm de kracht van Homey wb spraakherkenning is inderdaad niet helemaal vergelijkbaar met Siris spraakherkenning. Maar goed, laten we hier maar geen bashing topic van maken...
-
Is op zich wel een dingetje als juist Apple het nu ook gaat doen.... Smartphone, werd pas groot toen apple het deed. Tablet, werd pas groot toen apple het deed. Smartwatch, werd pas (relatief) groot toen apple het deed. Anyway, we'll see...
-
BasVanDenBosch said: But "after Sundown" there's no generation anymore so no change of the Stroommeter so "De stroommeter is veranderd" will not trigger? No, but it will give the number of kWh that is so far generated. And indeed this …
-
hi @BasVanDenBosch The Wh variable (which is in reality the kWh, but due to a bug it displays Wh) is the total generation of solar power. It has nothing to do with consumption. Yes, of course, it's nice to know what is the net profit of your solar …
-
Okay, time for an update. I have talked with Diederik, creator of the Solar panel app and have now a very simple solution. See below 2 flows. - Flow 1 will send me the power-generation by push message and disable itself at the same time (to preve…
-
BasVanDenBosch said: I understand, adding the time should work... Like I posted monday: Watch out don't do it like this, was just an example to show the difference. You should use one of the cards but not both (that will never trigger).…
-
hi @BasVanDenBosch in one of your previous posts, there's your flow with also 'it's after sunset' in the AND column ?!? So I am confused why you advise me to wipe it out... And the label + tekst in the push message is: {{$stroom}} and the TIJD label…
-
@BasVanDenBosch okay, so if I understand you well enough, the following combination should work for me?
-
@BasVanDenBosch where did you get the {{$energ}} from? Is it something that the solar panel app provides for everyone who installed it? Or should I create this variable somewhere else, if so: where?
-
BasVanDenBosch said: The card is not "Sun goes under" but "Sun is under". @work right now so cannot make an example but will do so tonight. Curious!!